All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v5 09/21] powerpc/64: context tracking remove _TIF_NOHZ
Date: Wed, 13 Jan 2021 17:32:03 +1000	[thread overview]
Message-ID: <20210113073215.516986-10-npiggin@gmail.com> (raw)
In-Reply-To: <20210113073215.516986-1-npiggin@gmail.com>

Add context tracking to the system call handler explicitly, and remove
_TIF_NOHZ.

This saves 35 cycles on gettid system call cost on POWER9 with a
CONFIG_NOHZ_FULL kernel.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/Kconfig                   |  1 -
 arch/powerpc/include/asm/thread_info.h |  4 +---
 arch/powerpc/kernel/ptrace/ptrace.c    |  4 ----
 arch/powerpc/kernel/signal.c           |  4 ----
 arch/powerpc/kernel/syscall_64.c       | 10 ++++++++++
 5 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 107bb4319e0e..28d5a1b1510f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -196,7 +196,6 @@ config PPC
 	select HAVE_STACKPROTECTOR		if PPC64 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r13)
 	select HAVE_STACKPROTECTOR		if PPC32 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r2)
 	select HAVE_CONTEXT_TRACKING		if PPC64
-	select HAVE_TIF_NOHZ			if PPC64
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DYNAMIC_FTRACE
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 3d8a47af7a25..386d576673a1 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -94,7 +94,6 @@ void arch_setup_new_exec(void);
 #define TIF_PATCH_PENDING	6	/* pending live patching update */
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_SINGLESTEP		8	/* singlestepping active */
-#define TIF_NOHZ		9	/* in adaptive nohz mode */
 #define TIF_SECCOMP		10	/* secure computing */
 #define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
 #define TIF_NOERROR		12	/* Force successful syscall return */
@@ -128,11 +127,10 @@ void arch_setup_new_exec(void);
 #define _TIF_UPROBE		(1<<TIF_UPROBE)
 #define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 #define _TIF_EMULATE_STACK_STORE	(1<<TIF_EMULATE_STACK_STORE)
-#define _TIF_NOHZ		(1<<TIF_NOHZ)
 #define _TIF_SYSCALL_EMU	(1<<TIF_SYSCALL_EMU)
 #define _TIF_SYSCALL_DOTRACE	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
 				 _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT | \
-				 _TIF_NOHZ | _TIF_SYSCALL_EMU)
+				 _TIF_SYSCALL_EMU)
 
 #define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
 				 _TIF_NOTIFY_RESUME | _TIF_UPROBE | \
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 3d44b73adb83..4f3d4ff3728c 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -262,8 +262,6 @@ long do_syscall_trace_enter(struct pt_regs *regs)
 {
 	u32 flags;
 
-	user_exit();
-
 	flags = READ_ONCE(current_thread_info()->flags) &
 		(_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE);
 
@@ -340,8 +338,6 @@ void do_syscall_trace_leave(struct pt_regs *regs)
 	step = test_thread_flag(TIF_SINGLESTEP);
 	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, step);
-
-	user_enter();
 }
 
 void __init pt_regs_check(void);
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 53782aa60ade..9ded046edb0e 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -282,8 +282,6 @@ static void do_signal(struct task_struct *tsk)
 
 void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 {
-	user_exit();
-
 	if (thread_info_flags & _TIF_UPROBE)
 		uprobe_notify_resume(regs);
 
@@ -299,8 +297,6 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 		tracehook_notify_resume(regs);
 		rseq_handle_notify_resume(NULL, regs);
 	}
-
-	user_enter();
 }
 
 static unsigned long get_tm_stackpointer(struct task_struct *tsk)
diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c
index dd87b2118620..d7d256a7a41f 100644
--- a/arch/powerpc/kernel/syscall_64.c
+++ b/arch/powerpc/kernel/syscall_64.c
@@ -1,9 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
+#include <linux/context_tracking.h>
 #include <linux/err.h>
 #include <asm/asm-prototypes.h>
 #include <asm/kup.h>
 #include <asm/cputime.h>
+#include <asm/interrupt.h>
 #include <asm/hw_irq.h>
 #include <asm/interrupt.h>
 #include <asm/kprobes.h>
@@ -28,6 +30,9 @@ notrace long system_call_exception(long r3, long r4, long r5,
 	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
 		BUG_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED);
 
+	CT_WARN_ON(ct_state() == CONTEXT_KERNEL);
+	user_exit_irqoff();
+
 	trace_hardirqs_off(); /* finish reconciling */
 
 	if (IS_ENABLED(CONFIG_PPC_BOOK3S))
@@ -182,6 +187,8 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3,
 	unsigned long ti_flags;
 	unsigned long ret = 0;
 
+	CT_WARN_ON(ct_state() == CONTEXT_USER);
+
 	kuap_check_amr();
 
 	regs->result = r3;
@@ -258,8 +265,11 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3,
 		}
 	}
 
+	user_enter_irqoff();
+
 	/* scv need not set RI=0 because SRRs are not used */
 	if (unlikely(!prep_irq_for_enabled_exit(!scv))) {
+		user_exit_irqoff();
 		local_irq_enable();
 		goto again;
 	}
-- 
2.23.0


  parent reply	other threads:[~2021-01-13  7:55 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-13  7:31 [PATCH v5 00/21] powerpc: interrupt wrappers Nicholas Piggin
2021-01-13  7:31 ` [PATCH v5 01/21] powerpc/32s: Do DABR match out of handle_page_fault() Nicholas Piggin
2021-01-13  7:31 ` [PATCH v5 02/21] powerpc/64s: move the last of the page fault handling logic to C Nicholas Piggin
2021-01-13 14:12   ` Christophe Leroy
2021-01-14  3:24     ` Nicholas Piggin
2021-01-14 12:09       ` Nicholas Piggin
2021-01-14 12:25         ` Christophe Leroy
2021-01-14 13:17           ` Nicholas Piggin
2021-01-14 13:28             ` Christophe Leroy
2021-01-15  0:25               ` Nicholas Piggin
2021-01-13  7:31 ` [PATCH v5 03/21] powerpc: remove arguments from fault handler functions Nicholas Piggin
2021-01-14 14:12   ` Christophe Leroy
2021-01-13  7:31 ` [PATCH v5 04/21] powerpc: bad_page_fault, do_break get registers from regs Nicholas Piggin
2021-01-13 14:25   ` Christophe Leroy
2021-01-14  3:26     ` Nicholas Piggin
2021-01-13  7:31 ` [PATCH v5 05/21] powerpc/perf: move perf irq/nmi handling details into traps.c Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 06/21] powerpc: interrupt handler wrapper functions Nicholas Piggin
2021-01-13 14:45   ` Christophe Leroy
2021-01-14  3:41     ` Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 07/21] powerpc: add interrupt wrapper entry / exit stub functions Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 08/21] powerpc: add interrupt_cond_local_irq_enable helper Nicholas Piggin
2021-01-13  7:32 ` Nicholas Piggin [this message]
2021-01-13 14:50   ` [PATCH v5 09/21] powerpc/64: context tracking remove _TIF_NOHZ Christophe Leroy
2021-01-14  3:48     ` Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 10/21] powerpc/64s/hash: improve context tracking of hash faults Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 11/21] powerpc/64: context tracking move to interrupt wrappers Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 12/21] powerpc/64: add context tracking to asynchronous interrupts Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 13/21] powerpc: handle irq_enter/irq_exit in interrupt handler wrappers Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 14/21] powerpc/64s: move context tracking exit to interrupt exit path Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 15/21] powerpc/64s: reconcile interrupts in C Nicholas Piggin
2021-01-13 14:54   ` Christophe Leroy
2021-01-14  3:51     ` Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 16/21] powerpc/64: move account_stolen_time into its own function Nicholas Piggin
2021-01-13 14:59   ` Christophe Leroy
2021-01-14  3:51     ` Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 17/21] powerpc/64: entry cpu time accounting in C Nicholas Piggin
2021-01-13 15:05   ` Christophe Leroy
2021-01-14  3:58     ` Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 18/21] powerpc: move NMI entry/exit code into wrapper Nicholas Piggin
2021-01-13 15:13   ` Christophe Leroy
2021-01-14  4:00     ` Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 19/21] powerpc/64s: move NMI soft-mask handling to C Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 20/21] powerpc/64s: runlatch interrupt handling in C Nicholas Piggin
2021-01-13  7:32 ` [PATCH v5 21/21] powerpc/64s: power4 nap fixup " Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210113073215.516986-10-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.