From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v5 19/21] powerpc/64s: move NMI soft-mask handling to C
Date: Wed, 13 Jan 2021 17:32:13 +1000 [thread overview]
Message-ID: <20210113073215.516986-20-npiggin@gmail.com> (raw)
In-Reply-To: <20210113073215.516986-1-npiggin@gmail.com>
Saving and restoring soft-mask state can now be done in C using the
interrupt handler wrapper functions.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/interrupt.h | 26 ++++++++++++
arch/powerpc/kernel/exceptions-64s.S | 60 ----------------------------
2 files changed, 26 insertions(+), 60 deletions(-)
diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 01192e213f9a..db89ecfef762 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -96,6 +96,10 @@ static inline void interrupt_async_exit_prepare(struct pt_regs *regs, struct int
struct interrupt_nmi_state {
#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
+ u8 irq_soft_mask;
+ u8 irq_happened;
+#endif
u8 ftrace_enabled;
#endif
};
@@ -103,6 +107,21 @@ struct interrupt_nmi_state {
static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct interrupt_nmi_state *state)
{
#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
+ state->irq_soft_mask = local_paca->irq_soft_mask;
+ state->irq_happened = local_paca->irq_happened;
+
+ /*
+ * Set IRQS_ALL_DISABLED unconditionally so irqs_disabled() does
+ * the right thing, and set IRQ_HARD_DIS. We do not want to reconcile
+ * because that goes through irq tracing which we don't want in NMI.
+ */
+ local_paca->irq_soft_mask = IRQS_ALL_DISABLED;
+ local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+
+ /* Don't do any per-CPU operations until interrupt state is fixed */
+ state->ftrace_enabled = this_cpu_get_ftrace_enabled();
+#endif
state->ftrace_enabled = this_cpu_get_ftrace_enabled();
this_cpu_set_ftrace_enabled(0);
#endif
@@ -126,6 +145,13 @@ static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct inter
#ifdef CONFIG_PPC64
this_cpu_set_ftrace_enabled(state->ftrace_enabled);
+
+#ifdef CONFIG_PPC_BOOK3S_64
+ /* Check we didn't change the pending interrupt mask. */
+ WARN_ON_ONCE((state->irq_happened | PACA_IRQ_HARD_DIS) != local_paca->irq_happened);
+ local_paca->irq_happened = state->irq_happened;
+ local_paca->irq_soft_mask = state->irq_soft_mask;
+#endif
#endif
}
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 68505e35bcf7..ceea3f3c5619 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1008,20 +1008,6 @@ EXC_COMMON_BEGIN(system_reset_common)
ld r1,PACA_NMI_EMERG_SP(r13)
subi r1,r1,INT_FRAME_SIZE
__GEN_COMMON_BODY system_reset
- /*
- * Set IRQS_ALL_DISABLED unconditionally so irqs_disabled() does
- * the right thing. We do not want to reconcile because that goes
- * through irq tracing which we don't want in NMI.
- *
- * Save PACAIRQHAPPENED to RESULT (otherwise unused), and set HARD_DIS
- * as we are running with MSR[EE]=0.
- */
- li r10,IRQS_ALL_DISABLED
- stb r10,PACAIRQSOFTMASK(r13)
- lbz r10,PACAIRQHAPPENED(r13)
- std r10,RESULT(r1)
- ori r10,r10,PACA_IRQ_HARD_DIS
- stb r10,PACAIRQHAPPENED(r13)
addi r3,r1,STACK_FRAME_OVERHEAD
bl system_reset_exception
@@ -1037,14 +1023,6 @@ EXC_COMMON_BEGIN(system_reset_common)
subi r10,r10,1
sth r10,PACA_IN_NMI(r13)
- /*
- * Restore soft mask settings.
- */
- ld r10,RESULT(r1)
- stb r10,PACAIRQHAPPENED(r13)
- ld r10,SOFTE(r1)
- stb r10,PACAIRQSOFTMASK(r13)
-
kuap_kernel_restore r9, r10
EXCEPTION_RESTORE_REGS
RFI_TO_USER_OR_KERNEL
@@ -1190,30 +1168,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
li r10,MSR_RI
mtmsrd r10,1
- /*
- * Set IRQS_ALL_DISABLED and save PACAIRQHAPPENED (see
- * system_reset_common)
- */
- li r10,IRQS_ALL_DISABLED
- stb r10,PACAIRQSOFTMASK(r13)
- lbz r10,PACAIRQHAPPENED(r13)
- std r10,RESULT(r1)
- ori r10,r10,PACA_IRQ_HARD_DIS
- stb r10,PACAIRQHAPPENED(r13)
-
addi r3,r1,STACK_FRAME_OVERHEAD
bl machine_check_early
std r3,RESULT(r1) /* Save result */
ld r12,_MSR(r1)
- /*
- * Restore soft mask settings.
- */
- ld r10,RESULT(r1)
- stb r10,PACAIRQHAPPENED(r13)
- ld r10,SOFTE(r1)
- stb r10,PACAIRQSOFTMASK(r13)
-
#ifdef CONFIG_PPC_P7_NAP
/*
* Check if thread was in power saving mode. We come here when any
@@ -2815,17 +2774,6 @@ EXC_COMMON_BEGIN(soft_nmi_common)
subi r1,r1,INT_FRAME_SIZE
__GEN_COMMON_BODY soft_nmi
- /*
- * Set IRQS_ALL_DISABLED and save PACAIRQHAPPENED (see
- * system_reset_common)
- */
- li r10,IRQS_ALL_DISABLED
- stb r10,PACAIRQSOFTMASK(r13)
- lbz r10,PACAIRQHAPPENED(r13)
- std r10,RESULT(r1)
- ori r10,r10,PACA_IRQ_HARD_DIS
- stb r10,PACAIRQHAPPENED(r13)
-
addi r3,r1,STACK_FRAME_OVERHEAD
bl soft_nmi_interrupt
@@ -2833,14 +2781,6 @@ EXC_COMMON_BEGIN(soft_nmi_common)
li r9,0
mtmsrd r9,1
- /*
- * Restore soft mask settings.
- */
- ld r10,RESULT(r1)
- stb r10,PACAIRQHAPPENED(r13)
- ld r10,SOFTE(r1)
- stb r10,PACAIRQSOFTMASK(r13)
-
kuap_kernel_restore r9, r10
EXCEPTION_RESTORE_REGS hsrr=0
RFI_TO_KERNEL
--
2.23.0
next prev parent reply other threads:[~2021-01-13 8:18 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-13 7:31 [PATCH v5 00/21] powerpc: interrupt wrappers Nicholas Piggin
2021-01-13 7:31 ` [PATCH v5 01/21] powerpc/32s: Do DABR match out of handle_page_fault() Nicholas Piggin
2021-01-13 7:31 ` [PATCH v5 02/21] powerpc/64s: move the last of the page fault handling logic to C Nicholas Piggin
2021-01-13 14:12 ` Christophe Leroy
2021-01-14 3:24 ` Nicholas Piggin
2021-01-14 12:09 ` Nicholas Piggin
2021-01-14 12:25 ` Christophe Leroy
2021-01-14 13:17 ` Nicholas Piggin
2021-01-14 13:28 ` Christophe Leroy
2021-01-15 0:25 ` Nicholas Piggin
2021-01-13 7:31 ` [PATCH v5 03/21] powerpc: remove arguments from fault handler functions Nicholas Piggin
2021-01-14 14:12 ` Christophe Leroy
2021-01-13 7:31 ` [PATCH v5 04/21] powerpc: bad_page_fault, do_break get registers from regs Nicholas Piggin
2021-01-13 14:25 ` Christophe Leroy
2021-01-14 3:26 ` Nicholas Piggin
2021-01-13 7:31 ` [PATCH v5 05/21] powerpc/perf: move perf irq/nmi handling details into traps.c Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 06/21] powerpc: interrupt handler wrapper functions Nicholas Piggin
2021-01-13 14:45 ` Christophe Leroy
2021-01-14 3:41 ` Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 07/21] powerpc: add interrupt wrapper entry / exit stub functions Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 08/21] powerpc: add interrupt_cond_local_irq_enable helper Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 09/21] powerpc/64: context tracking remove _TIF_NOHZ Nicholas Piggin
2021-01-13 14:50 ` Christophe Leroy
2021-01-14 3:48 ` Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 10/21] powerpc/64s/hash: improve context tracking of hash faults Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 11/21] powerpc/64: context tracking move to interrupt wrappers Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 12/21] powerpc/64: add context tracking to asynchronous interrupts Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 13/21] powerpc: handle irq_enter/irq_exit in interrupt handler wrappers Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 14/21] powerpc/64s: move context tracking exit to interrupt exit path Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 15/21] powerpc/64s: reconcile interrupts in C Nicholas Piggin
2021-01-13 14:54 ` Christophe Leroy
2021-01-14 3:51 ` Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 16/21] powerpc/64: move account_stolen_time into its own function Nicholas Piggin
2021-01-13 14:59 ` Christophe Leroy
2021-01-14 3:51 ` Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 17/21] powerpc/64: entry cpu time accounting in C Nicholas Piggin
2021-01-13 15:05 ` Christophe Leroy
2021-01-14 3:58 ` Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 18/21] powerpc: move NMI entry/exit code into wrapper Nicholas Piggin
2021-01-13 15:13 ` Christophe Leroy
2021-01-14 4:00 ` Nicholas Piggin
2021-01-13 7:32 ` Nicholas Piggin [this message]
2021-01-13 7:32 ` [PATCH v5 20/21] powerpc/64s: runlatch interrupt handling in C Nicholas Piggin
2021-01-13 7:32 ` [PATCH v5 21/21] powerpc/64s: power4 nap fixup " Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210113073215.516986-20-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.