From: Saeed Mahameed <saeed@kernel.org>
To: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, linux-rdma@vger.kernel.org,
Leon Romanovsky <leonro@nvidia.com>,
Yevgeny Kliteynik <kliteyn@nvidia.com>,
Alex Vesker <valex@nvidia.com>,
Saeed Mahameed <saeedm@nvidia.com>
Subject: [net-next 02/11] net/mlx5: DR, Add match STEv1 structs to ifc
Date: Fri, 29 Jan 2021 18:26:09 -0800 [thread overview]
Message-ID: <20210130022618.317351-3-saeed@kernel.org> (raw)
In-Reply-To: <20210130022618.317351-1-saeed@kernel.org>
From: Yevgeny Kliteynik <kliteyn@nvidia.com>
Add mlx5_ifc_dr_ste_v1.h - a new header with HW specific
STE structs for version 1.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
.../mlx5/core/steering/mlx5_ifc_dr_ste_v1.h | 273 ++++++++++++++++++
1 file changed, 273 insertions(+)
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5_ifc_dr_ste_v1.h
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5_ifc_dr_ste_v1.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5_ifc_dr_ste_v1.h
new file mode 100644
index 000000000000..6db7b8493fd9
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5_ifc_dr_ste_v1.h
@@ -0,0 +1,273 @@
+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
+/* Copyright (c) 2020 NVIDIA CORPORATION. All rights reserved. */
+
+#ifndef MLX5_IFC_DR_STE_V1_H
+#define MLX5_IFC_DR_STE_V1_H
+
+struct mlx5_ifc_ste_eth_l2_src_v1_bits {
+ u8 reserved_at_0[0x1];
+ u8 sx_sniffer[0x1];
+ u8 functional_loopback[0x1];
+ u8 ip_fragmented[0x1];
+ u8 qp_type[0x2];
+ u8 encapsulation_type[0x2];
+ u8 port[0x2];
+ u8 l3_type[0x2];
+ u8 l4_type[0x2];
+ u8 first_vlan_qualifier[0x2];
+ u8 first_priority[0x3];
+ u8 first_cfi[0x1];
+ u8 first_vlan_id[0xc];
+
+ u8 smac_47_16[0x20];
+
+ u8 smac_15_0[0x10];
+ u8 l3_ethertype[0x10];
+
+ u8 reserved_at_60[0x6];
+ u8 tcp_syn[0x1];
+ u8 reserved_at_67[0x3];
+ u8 force_loopback[0x1];
+ u8 l2_ok[0x1];
+ u8 l3_ok[0x1];
+ u8 l4_ok[0x1];
+ u8 second_vlan_qualifier[0x2];
+
+ u8 second_priority[0x3];
+ u8 second_cfi[0x1];
+ u8 second_vlan_id[0xc];
+};
+
+struct mlx5_ifc_ste_eth_l2_dst_v1_bits {
+ u8 reserved_at_0[0x1];
+ u8 sx_sniffer[0x1];
+ u8 functional_lb[0x1];
+ u8 ip_fragmented[0x1];
+ u8 qp_type[0x2];
+ u8 encapsulation_type[0x2];
+ u8 port[0x2];
+ u8 l3_type[0x2];
+ u8 l4_type[0x2];
+ u8 first_vlan_qualifier[0x2];
+ u8 first_priority[0x3];
+ u8 first_cfi[0x1];
+ u8 first_vlan_id[0xc];
+
+ u8 dmac_47_16[0x20];
+
+ u8 dmac_15_0[0x10];
+ u8 l3_ethertype[0x10];
+
+ u8 reserved_at_60[0x6];
+ u8 tcp_syn[0x1];
+ u8 reserved_at_67[0x3];
+ u8 force_lb[0x1];
+ u8 l2_ok[0x1];
+ u8 l3_ok[0x1];
+ u8 l4_ok[0x1];
+ u8 second_vlan_qualifier[0x2];
+ u8 second_priority[0x3];
+ u8 second_cfi[0x1];
+ u8 second_vlan_id[0xc];
+};
+
+struct mlx5_ifc_ste_eth_l2_src_dst_v1_bits {
+ u8 dmac_47_16[0x20];
+
+ u8 smac_47_16[0x20];
+
+ u8 dmac_15_0[0x10];
+ u8 reserved_at_50[0x2];
+ u8 functional_lb[0x1];
+ u8 reserved_at_53[0x5];
+ u8 port[0x2];
+ u8 l3_type[0x2];
+ u8 reserved_at_5c[0x2];
+ u8 first_vlan_qualifier[0x2];
+
+ u8 first_priority[0x3];
+ u8 first_cfi[0x1];
+ u8 first_vlan_id[0xc];
+ u8 smac_15_0[0x10];
+};
+
+struct mlx5_ifc_ste_eth_l3_ipv4_5_tuple_v1_bits {
+ u8 source_address[0x20];
+
+ u8 destination_address[0x20];
+
+ u8 source_port[0x10];
+ u8 destination_port[0x10];
+
+ u8 reserved_at_60[0x4];
+ u8 l4_ok[0x1];
+ u8 l3_ok[0x1];
+ u8 fragmented[0x1];
+ u8 tcp_ns[0x1];
+ u8 tcp_cwr[0x1];
+ u8 tcp_ece[0x1];
+ u8 tcp_urg[0x1];
+ u8 tcp_ack[0x1];
+ u8 tcp_psh[0x1];
+ u8 tcp_rst[0x1];
+ u8 tcp_syn[0x1];
+ u8 tcp_fin[0x1];
+ u8 dscp[0x6];
+ u8 ecn[0x2];
+ u8 protocol[0x8];
+};
+
+struct mlx5_ifc_ste_eth_l2_tnl_v1_bits {
+ u8 l2_tunneling_network_id[0x20];
+
+ u8 dmac_47_16[0x20];
+
+ u8 dmac_15_0[0x10];
+ u8 l3_ethertype[0x10];
+
+ u8 reserved_at_60[0x3];
+ u8 ip_fragmented[0x1];
+ u8 reserved_at_64[0x2];
+ u8 encp_type[0x2];
+ u8 reserved_at_68[0x2];
+ u8 l3_type[0x2];
+ u8 l4_type[0x2];
+ u8 first_vlan_qualifier[0x2];
+ u8 first_priority[0x3];
+ u8 first_cfi[0x1];
+ u8 first_vlan_id[0xc];
+};
+
+struct mlx5_ifc_ste_eth_l3_ipv4_misc_v1_bits {
+ u8 identification[0x10];
+ u8 flags[0x3];
+ u8 fragment_offset[0xd];
+
+ u8 total_length[0x10];
+ u8 checksum[0x10];
+
+ u8 version[0x4];
+ u8 ihl[0x4];
+ u8 time_to_live[0x8];
+ u8 reserved_at_50[0x10];
+
+ u8 reserved_at_60[0x1c];
+ u8 voq_internal_prio[0x4];
+};
+
+struct mlx5_ifc_ste_eth_l4_v1_bits {
+ u8 ipv6_version[0x4];
+ u8 reserved_at_4[0x4];
+ u8 dscp[0x6];
+ u8 ecn[0x2];
+ u8 ipv6_hop_limit[0x8];
+ u8 protocol[0x8];
+
+ u8 src_port[0x10];
+ u8 dst_port[0x10];
+
+ u8 first_fragment[0x1];
+ u8 reserved_at_41[0xb];
+ u8 flow_label[0x14];
+
+ u8 tcp_data_offset[0x4];
+ u8 l4_ok[0x1];
+ u8 l3_ok[0x1];
+ u8 fragmented[0x1];
+ u8 tcp_ns[0x1];
+ u8 tcp_cwr[0x1];
+ u8 tcp_ece[0x1];
+ u8 tcp_urg[0x1];
+ u8 tcp_ack[0x1];
+ u8 tcp_psh[0x1];
+ u8 tcp_rst[0x1];
+ u8 tcp_syn[0x1];
+ u8 tcp_fin[0x1];
+ u8 ipv6_paylen[0x10];
+};
+
+struct mlx5_ifc_ste_eth_l4_misc_v1_bits {
+ u8 window_size[0x10];
+ u8 urgent_pointer[0x10];
+
+ u8 ack_num[0x20];
+
+ u8 seq_num[0x20];
+
+ u8 length[0x10];
+ u8 checksum[0x10];
+};
+
+struct mlx5_ifc_ste_mpls_v1_bits {
+ u8 reserved_at_0[0x15];
+ u8 mpls_ok[0x1];
+ u8 mpls4_s_bit[0x1];
+ u8 mpls4_qualifier[0x1];
+ u8 mpls3_s_bit[0x1];
+ u8 mpls3_qualifier[0x1];
+ u8 mpls2_s_bit[0x1];
+ u8 mpls2_qualifier[0x1];
+ u8 mpls1_s_bit[0x1];
+ u8 mpls1_qualifier[0x1];
+ u8 mpls0_s_bit[0x1];
+ u8 mpls0_qualifier[0x1];
+
+ u8 mpls0_label[0x14];
+ u8 mpls0_exp[0x3];
+ u8 mpls0_s_bos[0x1];
+ u8 mpls0_ttl[0x8];
+
+ u8 mpls1_label[0x20];
+
+ u8 mpls2_label[0x20];
+};
+
+struct mlx5_ifc_ste_gre_v1_bits {
+ u8 gre_c_present[0x1];
+ u8 reserved_at_1[0x1];
+ u8 gre_k_present[0x1];
+ u8 gre_s_present[0x1];
+ u8 strict_src_route[0x1];
+ u8 recur[0x3];
+ u8 flags[0x5];
+ u8 version[0x3];
+ u8 gre_protocol[0x10];
+
+ u8 reserved_at_20[0x20];
+
+ u8 gre_key_h[0x18];
+ u8 gre_key_l[0x8];
+
+ u8 reserved_at_60[0x20];
+};
+
+struct mlx5_ifc_ste_src_gvmi_qp_v1_bits {
+ u8 loopback_synd[0x8];
+ u8 reserved_at_8[0x7];
+ u8 functional_lb[0x1];
+ u8 source_gvmi[0x10];
+
+ u8 force_lb[0x1];
+ u8 reserved_at_21[0x1];
+ u8 source_is_requestor[0x1];
+ u8 reserved_at_23[0x5];
+ u8 source_qp[0x18];
+
+ u8 reserved_at_40[0x20];
+
+ u8 reserved_at_60[0x20];
+};
+
+struct mlx5_ifc_ste_icmp_v1_bits {
+ u8 icmp_payload_data[0x20];
+
+ u8 icmp_header_data[0x20];
+
+ u8 icmp_type[0x8];
+ u8 icmp_code[0x8];
+ u8 reserved_at_50[0x10];
+
+ u8 reserved_at_60[0x20];
+};
+
+#endif /* MLX5_IFC_DR_STE_V1_H */
--
2.29.2
next prev parent reply other threads:[~2021-01-30 4:14 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-30 2:26 [pull request][net-next 00/11] mlx5 SW steering for ConnectX-6DX Saeed Mahameed
2021-01-30 2:26 ` [net-next 01/11] net/mlx5: DR, Fix potential shift wrapping of 32-bit value Saeed Mahameed
2021-02-02 3:00 ` patchwork-bot+netdevbpf
2021-01-30 2:26 ` Saeed Mahameed [this message]
2021-01-30 2:26 ` [net-next 03/11] net/mlx5: DR, Add HW STEv1 match logic Saeed Mahameed
2021-01-30 2:26 ` [net-next 04/11] net/mlx5: DR, Allow native protocol support for HW STEv1 Saeed Mahameed
2021-01-30 2:26 ` [net-next 05/11] net/mlx5: DR, Add STEv1 setters and getters Saeed Mahameed
2021-01-30 2:26 ` [net-next 06/11] net/mlx5: DR, Add STEv1 action apply logic Saeed Mahameed
2021-01-30 2:26 ` [net-next 07/11] net/mlx5: DR, Add STEv1 modify header logic Saeed Mahameed
2021-01-30 2:26 ` [net-next 08/11] net/mlx5: DR, Use the right size when writing partial STE into HW Saeed Mahameed
2021-01-30 2:26 ` [net-next 09/11] net/mlx5: DR, Use HW specific logic API when writing STE Saeed Mahameed
2021-01-30 2:26 ` [net-next 10/11] net/mlx5: DR, Copy all 64B whenever replacing STE in the head of miss-list Saeed Mahameed
2021-01-30 2:26 ` [net-next 11/11] net/mlx5: DR, Allow SW steering for sw_owner_v2 devices Saeed Mahameed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210130022618.317351-3-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=kliteyn@nvidia.com \
--cc=kuba@kernel.org \
--cc=leonro@nvidia.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=saeedm@nvidia.com \
--cc=valex@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.