From: "Christopher M. Riedl" <cmr@codefail.de>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v5 06/10] powerpc/signal64: Replace setup_sigcontext() w/ unsafe_setup_sigcontext()
Date: Wed, 3 Feb 2021 12:43:19 -0600 [thread overview]
Message-ID: <20210203184323.20792-7-cmr@codefail.de> (raw)
In-Reply-To: <20210203184323.20792-1-cmr@codefail.de>
Previously setup_sigcontext() performed a costly KUAP switch on every
uaccess operation. These repeated uaccess switches cause a significant
drop in signal handling performance.
Rewrite setup_sigcontext() to assume that a userspace write access window
is open. Replace all uaccess functions with their 'unsafe' versions
which avoid the repeated uaccess switches.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
---
arch/powerpc/kernel/signal_64.c | 70 ++++++++++++++++++++-------------
1 file changed, 43 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 8e1d804ce552..4248e4489ff1 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -101,9 +101,13 @@ static void prepare_setup_sigcontext(struct task_struct *tsk, int ctx_has_vsx_re
* Set up the sigcontext for the signal frame.
*/
-static long setup_sigcontext(struct sigcontext __user *sc,
- struct task_struct *tsk, int signr, sigset_t *set,
- unsigned long handler, int ctx_has_vsx_region)
+#define unsafe_setup_sigcontext(sc, tsk, signr, set, handler, \
+ ctx_has_vsx_region, e) \
+ unsafe_op_wrap(__unsafe_setup_sigcontext(sc, tsk, signr, set, \
+ handler, ctx_has_vsx_region), e)
+static long notrace __unsafe_setup_sigcontext(struct sigcontext __user *sc,
+ struct task_struct *tsk, int signr, sigset_t *set,
+ unsigned long handler, int ctx_has_vsx_region)
{
/* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the
* process never used altivec yet (MSR_VEC is zero in pt_regs of
@@ -118,20 +122,19 @@ static long setup_sigcontext(struct sigcontext __user *sc,
#endif
struct pt_regs *regs = tsk->thread.regs;
unsigned long msr = regs->msr;
- long err = 0;
/* Force usr to alway see softe as 1 (interrupts enabled) */
unsigned long softe = 0x1;
BUG_ON(tsk != current);
#ifdef CONFIG_ALTIVEC
- err |= __put_user(v_regs, &sc->v_regs);
+ unsafe_put_user(v_regs, &sc->v_regs, efault_out);
/* save altivec registers */
if (tsk->thread.used_vr) {
/* Copy 33 vec registers (vr0..31 and vscr) to the stack */
- err |= __copy_to_user(v_regs, &tsk->thread.vr_state,
- 33 * sizeof(vector128));
+ unsafe_copy_to_user(v_regs, &tsk->thread.vr_state,
+ 33 * sizeof(vector128), efault_out);
/* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg)
* contains valid data.
*/
@@ -140,12 +143,12 @@ static long setup_sigcontext(struct sigcontext __user *sc,
/* We always copy to/from vrsave, it's 0 if we don't have or don't
* use altivec.
*/
- err |= __put_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33]);
+ unsafe_put_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33], efault_out);
#else /* CONFIG_ALTIVEC */
- err |= __put_user(0, &sc->v_regs);
+ unsafe_put_user(0, &sc->v_regs, efault_out);
#endif /* CONFIG_ALTIVEC */
/* copy fpr regs and fpscr */
- err |= copy_fpr_to_user(&sc->fp_regs, tsk);
+ unsafe_copy_fpr_to_user(&sc->fp_regs, tsk, efault_out);
/*
* Clear the MSR VSX bit to indicate there is no valid state attached
@@ -160,24 +163,27 @@ static long setup_sigcontext(struct sigcontext __user *sc,
*/
if (tsk->thread.used_vsr && ctx_has_vsx_region) {
v_regs += ELF_NVRREG;
- err |= copy_vsx_to_user(v_regs, tsk);
+ unsafe_copy_vsx_to_user(v_regs, tsk, efault_out);
/* set MSR_VSX in the MSR value in the frame to
* indicate that sc->vs_reg) contains valid data.
*/
msr |= MSR_VSX;
}
#endif /* CONFIG_VSX */
- err |= __put_user(&sc->gp_regs, &sc->regs);
+ unsafe_put_user(&sc->gp_regs, &sc->regs, efault_out);
WARN_ON(!FULL_REGS(regs));
- err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
- err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
- err |= __put_user(softe, &sc->gp_regs[PT_SOFTE]);
- err |= __put_user(signr, &sc->signal);
- err |= __put_user(handler, &sc->handler);
+ unsafe_copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE, efault_out);
+ unsafe_put_user(msr, &sc->gp_regs[PT_MSR], efault_out);
+ unsafe_put_user(softe, &sc->gp_regs[PT_SOFTE], efault_out);
+ unsafe_put_user(signr, &sc->signal, efault_out);
+ unsafe_put_user(handler, &sc->handler, efault_out);
if (set != NULL)
- err |= __put_user(set->sig[0], &sc->oldmask);
+ unsafe_put_user(set->sig[0], &sc->oldmask, efault_out);
- return err;
+ return 0;
+
+efault_out:
+ return -EFAULT;
}
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -664,12 +670,15 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx,
if (old_ctx != NULL) {
prepare_setup_sigcontext(current, ctx_has_vsx_region);
- if (!access_ok(old_ctx, ctx_size)
- || setup_sigcontext(&old_ctx->uc_mcontext, current, 0, NULL, 0,
- ctx_has_vsx_region)
- || __copy_to_user(&old_ctx->uc_sigmask,
- ¤t->blocked, sizeof(sigset_t)))
+ if (!user_write_access_begin(old_ctx, ctx_size))
return -EFAULT;
+
+ unsafe_setup_sigcontext(&old_ctx->uc_mcontext, current, 0, NULL,
+ 0, ctx_has_vsx_region, efault_out);
+ unsafe_copy_to_user(&old_ctx->uc_sigmask, ¤t->blocked,
+ sizeof(sigset_t), efault_out);
+
+ user_write_access_end();
}
if (new_ctx == NULL)
return 0;
@@ -698,6 +707,10 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx,
/* This returns like rt_sigreturn */
set_thread_flag(TIF_RESTOREALL);
return 0;
+
+efault_out:
+ user_write_access_end();
+ return -EFAULT;
}
@@ -850,9 +863,12 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
} else {
err |= __put_user(0, &frame->uc.uc_link);
prepare_setup_sigcontext(tsk, 1);
- err |= setup_sigcontext(&frame->uc.uc_mcontext, tsk, ksig->sig,
- NULL, (unsigned long)ksig->ka.sa.sa_handler,
- 1);
+ if (!user_write_access_begin(frame, sizeof(struct rt_sigframe)))
+ return -EFAULT;
+ err |= __unsafe_setup_sigcontext(&frame->uc.uc_mcontext, tsk,
+ ksig->sig, NULL,
+ (unsigned long)ksig->ka.sa.sa_handler, 1);
+ user_write_access_end();
}
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
--
2.26.1
next prev parent reply other threads:[~2021-02-03 18:49 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-03 18:43 [PATCH v5 00/10] Improve signal performance on PPC64 with KUAP Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 01/10] powerpc/uaccess: Add unsafe_copy_from_user Christopher M. Riedl
2021-02-05 4:47 ` Daniel Axtens
2021-02-03 18:43 ` [PATCH v5 02/10] powerpc/signal: Add unsafe_copy_{vsx, fpr}_from_user() Christopher M. Riedl
2021-02-05 5:17 ` Daniel Axtens
2021-02-03 18:43 ` [PATCH v5 03/10] powerpc/signal64: Move non-inline functions out of setup_sigcontext() Christopher M. Riedl
2021-02-08 4:44 ` Daniel Axtens
2021-02-10 4:37 ` Christopher M. Riedl
2021-02-10 21:06 ` Daniel Axtens
2021-02-10 23:51 ` Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 04/10] powerpc: Reference param in MSR_TM_ACTIVE() macro Christopher M. Riedl
2021-02-12 4:52 ` Daniel Axtens
2021-02-03 18:43 ` [PATCH v5 05/10] powerpc/signal64: Remove TM ifdefery in middle of if/else block Christopher M. Riedl
2021-02-12 5:21 ` Daniel Axtens
2021-02-17 19:27 ` Christopher M. Riedl
2021-02-18 10:47 ` Michael Ellerman
2021-02-03 18:43 ` Christopher M. Riedl [this message]
2021-02-12 5:41 ` [PATCH v5 06/10] powerpc/signal64: Replace setup_sigcontext() w/ unsafe_setup_sigcontext() Daniel Axtens
2021-02-17 19:31 ` Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 07/10] powerpc/signal64: Replace restore_sigcontext() w/ unsafe_restore_sigcontext() Christopher M. Riedl
2021-02-12 21:17 ` Daniel Axtens
2021-02-17 19:32 ` Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 08/10] powerpc/signal64: Rewrite handle_rt_signal64() to minimise uaccess switches Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 09/10] powerpc/signal64: Rewrite rt_sigreturn() " Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 10/10] powerpc/signal64: Use __get_user() to copy sigset_t Christopher M. Riedl
2021-02-05 4:40 ` Christopher M. Riedl
2021-02-09 21:45 ` Christophe Leroy
2021-02-10 4:16 ` Christopher M. Riedl
2021-02-12 21:21 ` Daniel Axtens
2021-02-17 19:53 ` Christopher M. Riedl
2021-02-15 22:02 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210203184323.20792-7-cmr@codefail.de \
--to=cmr@codefail.de \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.