From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Md Sadre Alam <mdalam@codeaurora.org>
Cc: vigneshr@ti.com, linux-kernel@vger.kernel.org,
boris.brezillon@collabora.com, linux-mtd@lists.infradead.org,
miquel.raynal@bootlin.com, sricharan@codeaurora.org
Subject: Re: [PATCH V4] mtd: rawnand: qcom: update last code word register
Date: Wed, 10 Feb 2021 14:31:44 +0530 [thread overview]
Message-ID: <20210210090144.GE19226@work> (raw)
In-Reply-To: <1611869959-5109-1-git-send-email-mdalam@codeaurora.org>
On Fri, Jan 29, 2021 at 03:09:19AM +0530, Md Sadre Alam wrote:
> From QPIC version 2.0 onwards new register got added to
> read last codeword. This change will add the READ_LOCATION_LAST_CW_n
> register.
>
> For first three code word READ_LOCATION_n register will be
> use.For last code word READ_LOCATION_LAST_CW_n register will be
> use.
>
> Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Thanks,
Mani
> ---
> [V4]
> * Modified condition for nandc_set_read_loc_last() in qcom_nandc_read_cw_raw().
> * Added one additional argument "last_cw" to the function config_nand_cw_read()
> to handle last code word condition.
> * Changed total number of last code word register "NAND_READ_LOCATION_LAST_CW_0" to 4
> while doing code word configuration.
> drivers/mtd/nand/raw/qcom_nandc.c | 110 +++++++++++++++++++++++++++++---------
> 1 file changed, 84 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index 667e4bf..9484be8 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -48,6 +48,10 @@
> #define NAND_READ_LOCATION_1 0xf24
> #define NAND_READ_LOCATION_2 0xf28
> #define NAND_READ_LOCATION_3 0xf2c
> +#define NAND_READ_LOCATION_LAST_CW_0 0xf40
> +#define NAND_READ_LOCATION_LAST_CW_1 0xf44
> +#define NAND_READ_LOCATION_LAST_CW_2 0xf48
> +#define NAND_READ_LOCATION_LAST_CW_3 0xf4c
>
> /* dummy register offsets, used by write_reg_dma */
> #define NAND_DEV_CMD1_RESTORE 0xdead
> @@ -187,6 +191,12 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \
> ((size) << READ_LOCATION_SIZE) | \
> ((is_last) << READ_LOCATION_LAST))
>
> +#define nandc_set_read_loc_last(nandc, reg, offset, size, is_last) \
> +nandc_set_reg(nandc, NAND_READ_LOCATION_LAST_CW_##reg, \
> + ((offset) << READ_LOCATION_OFFSET) | \
> + ((size) << READ_LOCATION_SIZE) | \
> + ((is_last) << READ_LOCATION_LAST))
> +
> /*
> * Returns the actual register address for all NAND_DEV_ registers
> * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD)
> @@ -316,6 +326,10 @@ struct nandc_regs {
> __le32 read_location1;
> __le32 read_location2;
> __le32 read_location3;
> + __le32 read_location_last0;
> + __le32 read_location_last1;
> + __le32 read_location_last2;
> + __le32 read_location_last3;
>
> __le32 erased_cw_detect_cfg_clr;
> __le32 erased_cw_detect_cfg_set;
> @@ -644,6 +658,14 @@ static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset)
> return ®s->read_location2;
> case NAND_READ_LOCATION_3:
> return ®s->read_location3;
> + case NAND_READ_LOCATION_LAST_CW_0:
> + return ®s->read_location_last0;
> + case NAND_READ_LOCATION_LAST_CW_1:
> + return ®s->read_location_last1;
> + case NAND_READ_LOCATION_LAST_CW_2:
> + return ®s->read_location_last2;
> + case NAND_READ_LOCATION_LAST_CW_3:
> + return ®s->read_location_last3;
> default:
> return NULL;
> }
> @@ -719,9 +741,14 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
> nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus);
> nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
>
> - if (read)
> - nandc_set_read_loc(nandc, 0, 0, host->use_ecc ?
> - host->cw_data : host->cw_size, 1);
> + if (read) {
> + if (nandc->props->qpic_v2)
> + nandc_set_read_loc_last(nandc, 0, 0, host->use_ecc ?
> + host->cw_data : host->cw_size, 1);
> + else
> + nandc_set_read_loc(nandc, 0, 0, host->use_ecc ?
> + host->cw_data : host->cw_size, 1);
> + }
> }
>
> /*
> @@ -1094,11 +1121,16 @@ static void config_nand_page_read(struct qcom_nand_controller *nandc)
> * before reading each codeword in NAND page.
> */
> static void
> -config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc)
> +config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc, bool last_cw)
> {
> - if (nandc->props->is_bam)
> - write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
> - NAND_BAM_NEXT_SGL);
> + if (nandc->props->is_bam) {
> + if (nandc->props->qpic_v2 && last_cw)
> + write_reg_dma(nandc, NAND_READ_LOCATION_LAST_CW_0, 4,
> + NAND_BAM_NEXT_SGL);
> + else
> + write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
> + NAND_BAM_NEXT_SGL);
> + }
>
> write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
> write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
> @@ -1118,10 +1150,10 @@ config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc)
> */
> static void
> config_nand_single_cw_page_read(struct qcom_nand_controller *nandc,
> - bool use_ecc)
> + bool use_ecc, bool last_cw)
> {
> config_nand_page_read(nandc);
> - config_nand_cw_read(nandc, use_ecc);
> + config_nand_cw_read(nandc, use_ecc, last_cw);
> }
>
> /*
> @@ -1215,7 +1247,7 @@ static int nandc_param(struct qcom_nand_host *host)
> nandc->buf_count = 512;
> memset(nandc->data_buffer, 0xff, nandc->buf_count);
>
> - config_nand_single_cw_page_read(nandc, false);
> + config_nand_single_cw_page_read(nandc, false, false);
>
> read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
> nandc->buf_count, 0);
> @@ -1633,19 +1665,32 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
> }
>
> if (nandc->props->is_bam) {
> - nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0);
> - read_loc += data_size1;
> + if (nandc->props->qpic_v2 && cw == (ecc->steps - 1)) {
> + nandc_set_read_loc_last(nandc, 0, read_loc, data_size1, 0);
> + read_loc += data_size1;
> +
> + nandc_set_read_loc_last(nandc, 1, read_loc, oob_size1, 0);
> + read_loc += oob_size1;
>
> - nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0);
> - read_loc += oob_size1;
> + nandc_set_read_loc_last(nandc, 2, read_loc, data_size2, 0);
> + read_loc += data_size2;
>
> - nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0);
> - read_loc += data_size2;
> + nandc_set_read_loc_last(nandc, 3, read_loc, oob_size2, 1);
> + } else {
> + nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0);
> + read_loc += data_size1;
> +
> + nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0);
> + read_loc += oob_size1;
>
> - nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
> + nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0);
> + read_loc += data_size2;
> +
> + nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
> + }
> }
>
> - config_nand_cw_read(nandc, false);
> + config_nand_cw_read(nandc, false, cw == ecc->steps - 1 ? true : false);
>
> read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
> reg_off += data_size1;
> @@ -1873,18 +1918,31 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
>
> if (nandc->props->is_bam) {
> if (data_buf && oob_buf) {
> - nandc_set_read_loc(nandc, 0, 0, data_size, 0);
> - nandc_set_read_loc(nandc, 1, data_size,
> - oob_size, 1);
> + if (nandc->props->qpic_v2 && i == (ecc->steps - 1)) {
> + nandc_set_read_loc_last(nandc, 0, 0, data_size, 0);
> + nandc_set_read_loc_last(nandc, 1, data_size,
> + oob_size, 1);
> + } else {
> + nandc_set_read_loc(nandc, 0, 0, data_size, 0);
> + nandc_set_read_loc(nandc, 1, data_size,
> + oob_size, 1);
> + }
> } else if (data_buf) {
> - nandc_set_read_loc(nandc, 0, 0, data_size, 1);
> + if (nandc->props->qpic_v2 && i == (ecc->steps - 1))
> + nandc_set_read_loc_last(nandc, 0, 0, data_size, 1);
> + else
> + nandc_set_read_loc(nandc, 0, 0, data_size, 1);
> } else {
> - nandc_set_read_loc(nandc, 0, data_size,
> - oob_size, 1);
> + if (nandc->props->qpic_v2 && i == (ecc->steps - 1))
> + nandc_set_read_loc_last(nandc, 0, data_size,
> + oob_size, 1);
> + else
> + nandc_set_read_loc(nandc, 0, data_size,
> + oob_size, 1);
> }
> }
>
> - config_nand_cw_read(nandc, true);
> + config_nand_cw_read(nandc, true, i == ecc->steps - 1 ? true : false);
>
> if (data_buf)
> read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
> @@ -1946,7 +2004,7 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
> set_address(host, host->cw_size * (ecc->steps - 1), page);
> update_rw_regs(host, 1, true);
>
> - config_nand_single_cw_page_read(nandc, host->use_ecc);
> + config_nand_single_cw_page_read(nandc, host->use_ecc, true);
>
> read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
>
> --
> 2.7.4
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Md Sadre Alam <mdalam@codeaurora.org>
Cc: miquel.raynal@bootlin.com, boris.brezillon@collabora.com,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
vigneshr@ti.com, sricharan@codeaurora.org
Subject: Re: [PATCH V4] mtd: rawnand: qcom: update last code word register
Date: Wed, 10 Feb 2021 14:31:44 +0530 [thread overview]
Message-ID: <20210210090144.GE19226@work> (raw)
In-Reply-To: <1611869959-5109-1-git-send-email-mdalam@codeaurora.org>
On Fri, Jan 29, 2021 at 03:09:19AM +0530, Md Sadre Alam wrote:
> From QPIC version 2.0 onwards new register got added to
> read last codeword. This change will add the READ_LOCATION_LAST_CW_n
> register.
>
> For first three code word READ_LOCATION_n register will be
> use.For last code word READ_LOCATION_LAST_CW_n register will be
> use.
>
> Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Thanks,
Mani
> ---
> [V4]
> * Modified condition for nandc_set_read_loc_last() in qcom_nandc_read_cw_raw().
> * Added one additional argument "last_cw" to the function config_nand_cw_read()
> to handle last code word condition.
> * Changed total number of last code word register "NAND_READ_LOCATION_LAST_CW_0" to 4
> while doing code word configuration.
> drivers/mtd/nand/raw/qcom_nandc.c | 110 +++++++++++++++++++++++++++++---------
> 1 file changed, 84 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index 667e4bf..9484be8 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -48,6 +48,10 @@
> #define NAND_READ_LOCATION_1 0xf24
> #define NAND_READ_LOCATION_2 0xf28
> #define NAND_READ_LOCATION_3 0xf2c
> +#define NAND_READ_LOCATION_LAST_CW_0 0xf40
> +#define NAND_READ_LOCATION_LAST_CW_1 0xf44
> +#define NAND_READ_LOCATION_LAST_CW_2 0xf48
> +#define NAND_READ_LOCATION_LAST_CW_3 0xf4c
>
> /* dummy register offsets, used by write_reg_dma */
> #define NAND_DEV_CMD1_RESTORE 0xdead
> @@ -187,6 +191,12 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \
> ((size) << READ_LOCATION_SIZE) | \
> ((is_last) << READ_LOCATION_LAST))
>
> +#define nandc_set_read_loc_last(nandc, reg, offset, size, is_last) \
> +nandc_set_reg(nandc, NAND_READ_LOCATION_LAST_CW_##reg, \
> + ((offset) << READ_LOCATION_OFFSET) | \
> + ((size) << READ_LOCATION_SIZE) | \
> + ((is_last) << READ_LOCATION_LAST))
> +
> /*
> * Returns the actual register address for all NAND_DEV_ registers
> * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD)
> @@ -316,6 +326,10 @@ struct nandc_regs {
> __le32 read_location1;
> __le32 read_location2;
> __le32 read_location3;
> + __le32 read_location_last0;
> + __le32 read_location_last1;
> + __le32 read_location_last2;
> + __le32 read_location_last3;
>
> __le32 erased_cw_detect_cfg_clr;
> __le32 erased_cw_detect_cfg_set;
> @@ -644,6 +658,14 @@ static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset)
> return ®s->read_location2;
> case NAND_READ_LOCATION_3:
> return ®s->read_location3;
> + case NAND_READ_LOCATION_LAST_CW_0:
> + return ®s->read_location_last0;
> + case NAND_READ_LOCATION_LAST_CW_1:
> + return ®s->read_location_last1;
> + case NAND_READ_LOCATION_LAST_CW_2:
> + return ®s->read_location_last2;
> + case NAND_READ_LOCATION_LAST_CW_3:
> + return ®s->read_location_last3;
> default:
> return NULL;
> }
> @@ -719,9 +741,14 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
> nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus);
> nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
>
> - if (read)
> - nandc_set_read_loc(nandc, 0, 0, host->use_ecc ?
> - host->cw_data : host->cw_size, 1);
> + if (read) {
> + if (nandc->props->qpic_v2)
> + nandc_set_read_loc_last(nandc, 0, 0, host->use_ecc ?
> + host->cw_data : host->cw_size, 1);
> + else
> + nandc_set_read_loc(nandc, 0, 0, host->use_ecc ?
> + host->cw_data : host->cw_size, 1);
> + }
> }
>
> /*
> @@ -1094,11 +1121,16 @@ static void config_nand_page_read(struct qcom_nand_controller *nandc)
> * before reading each codeword in NAND page.
> */
> static void
> -config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc)
> +config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc, bool last_cw)
> {
> - if (nandc->props->is_bam)
> - write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
> - NAND_BAM_NEXT_SGL);
> + if (nandc->props->is_bam) {
> + if (nandc->props->qpic_v2 && last_cw)
> + write_reg_dma(nandc, NAND_READ_LOCATION_LAST_CW_0, 4,
> + NAND_BAM_NEXT_SGL);
> + else
> + write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
> + NAND_BAM_NEXT_SGL);
> + }
>
> write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
> write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
> @@ -1118,10 +1150,10 @@ config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc)
> */
> static void
> config_nand_single_cw_page_read(struct qcom_nand_controller *nandc,
> - bool use_ecc)
> + bool use_ecc, bool last_cw)
> {
> config_nand_page_read(nandc);
> - config_nand_cw_read(nandc, use_ecc);
> + config_nand_cw_read(nandc, use_ecc, last_cw);
> }
>
> /*
> @@ -1215,7 +1247,7 @@ static int nandc_param(struct qcom_nand_host *host)
> nandc->buf_count = 512;
> memset(nandc->data_buffer, 0xff, nandc->buf_count);
>
> - config_nand_single_cw_page_read(nandc, false);
> + config_nand_single_cw_page_read(nandc, false, false);
>
> read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
> nandc->buf_count, 0);
> @@ -1633,19 +1665,32 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
> }
>
> if (nandc->props->is_bam) {
> - nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0);
> - read_loc += data_size1;
> + if (nandc->props->qpic_v2 && cw == (ecc->steps - 1)) {
> + nandc_set_read_loc_last(nandc, 0, read_loc, data_size1, 0);
> + read_loc += data_size1;
> +
> + nandc_set_read_loc_last(nandc, 1, read_loc, oob_size1, 0);
> + read_loc += oob_size1;
>
> - nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0);
> - read_loc += oob_size1;
> + nandc_set_read_loc_last(nandc, 2, read_loc, data_size2, 0);
> + read_loc += data_size2;
>
> - nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0);
> - read_loc += data_size2;
> + nandc_set_read_loc_last(nandc, 3, read_loc, oob_size2, 1);
> + } else {
> + nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0);
> + read_loc += data_size1;
> +
> + nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0);
> + read_loc += oob_size1;
>
> - nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
> + nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0);
> + read_loc += data_size2;
> +
> + nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
> + }
> }
>
> - config_nand_cw_read(nandc, false);
> + config_nand_cw_read(nandc, false, cw == ecc->steps - 1 ? true : false);
>
> read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
> reg_off += data_size1;
> @@ -1873,18 +1918,31 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
>
> if (nandc->props->is_bam) {
> if (data_buf && oob_buf) {
> - nandc_set_read_loc(nandc, 0, 0, data_size, 0);
> - nandc_set_read_loc(nandc, 1, data_size,
> - oob_size, 1);
> + if (nandc->props->qpic_v2 && i == (ecc->steps - 1)) {
> + nandc_set_read_loc_last(nandc, 0, 0, data_size, 0);
> + nandc_set_read_loc_last(nandc, 1, data_size,
> + oob_size, 1);
> + } else {
> + nandc_set_read_loc(nandc, 0, 0, data_size, 0);
> + nandc_set_read_loc(nandc, 1, data_size,
> + oob_size, 1);
> + }
> } else if (data_buf) {
> - nandc_set_read_loc(nandc, 0, 0, data_size, 1);
> + if (nandc->props->qpic_v2 && i == (ecc->steps - 1))
> + nandc_set_read_loc_last(nandc, 0, 0, data_size, 1);
> + else
> + nandc_set_read_loc(nandc, 0, 0, data_size, 1);
> } else {
> - nandc_set_read_loc(nandc, 0, data_size,
> - oob_size, 1);
> + if (nandc->props->qpic_v2 && i == (ecc->steps - 1))
> + nandc_set_read_loc_last(nandc, 0, data_size,
> + oob_size, 1);
> + else
> + nandc_set_read_loc(nandc, 0, data_size,
> + oob_size, 1);
> }
> }
>
> - config_nand_cw_read(nandc, true);
> + config_nand_cw_read(nandc, true, i == ecc->steps - 1 ? true : false);
>
> if (data_buf)
> read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
> @@ -1946,7 +2004,7 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
> set_address(host, host->cw_size * (ecc->steps - 1), page);
> update_rw_regs(host, 1, true);
>
> - config_nand_single_cw_page_read(nandc, host->use_ecc);
> + config_nand_single_cw_page_read(nandc, host->use_ecc, true);
>
> read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
>
> --
> 2.7.4
>
next prev parent reply other threads:[~2021-02-10 9:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-28 21:39 [PATCH V4] mtd: rawnand: qcom: update last code word register Md Sadre Alam
2021-01-28 21:39 ` Md Sadre Alam
2021-02-10 9:01 ` Manivannan Sadhasivam [this message]
2021-02-10 9:01 ` Manivannan Sadhasivam
2021-02-11 14:07 ` Miquel Raynal
2021-02-11 14:07 ` Miquel Raynal
2021-02-11 19:30 ` mdalam
2021-02-11 19:30 ` mdalam
2021-02-12 8:19 ` Miquel Raynal
2021-02-12 8:19 ` Miquel Raynal
2021-02-14 21:20 ` mdalam
2021-02-14 21:20 ` mdalam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210210090144.GE19226@work \
--to=manivannan.sadhasivam@linaro.org \
--cc=boris.brezillon@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=mdalam@codeaurora.org \
--cc=miquel.raynal@bootlin.com \
--cc=sricharan@codeaurora.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.