From: "Rafał Miłecki" <zajec5@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, "Rob Herring" <robh@kernel.org>,
"Boris Brezillon" <bbrezillon@kernel.org>,
linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH V2 mtd/next 1/3] dt-bindings: mtd: move partition binding to its own file
Date: Thu, 11 Feb 2021 17:20:10 +0100 [thread overview]
Message-ID: <20210211162012.27417-1-zajec5@gmail.com> (raw)
From: Rafał Miłecki <rafal@milecki.pl>
Single partition binding is quite common and may be:
1. Used by multiple parsers
2. Extended for more specific cases
Move it to separated file to avoid code duplication.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../mtd/partitions/fixed-partitions.yaml | 33 +------------
.../bindings/mtd/partitions/partition.yaml | 47 +++++++++++++++++++
2 files changed, 48 insertions(+), 32 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/partitions/partition.yaml
diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
index 6d4a3450e064..ea4cace6a955 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
@@ -27,38 +27,7 @@ properties:
patternProperties:
"@[0-9a-f]+$":
- description: node describing a single flash partition
- type: object
-
- properties:
- reg:
- description: partition's offset and size within the flash
- maxItems: 1
-
- label:
- description: The label / name for this partition. If omitted, the label
- is taken from the node name (excluding the unit address).
-
- read-only:
- description: This parameter, if present, is a hint that this partition
- should only be mounted read-only. This is usually used for flash
- partitions containing early-boot firmware images or data which should
- not be clobbered.
- type: boolean
-
- lock:
- description: Do not unlock the partition at initialization time (not
- supported on all devices)
- type: boolean
-
- slc-mode:
- description: This parameter, if present, allows one to emulate SLC mode
- on a partition attached to an MLC NAND thus making this partition
- immune to paired-pages corruptions
- type: boolean
-
- required:
- - reg
+ $ref: "partition.yaml#"
required:
- "#address-cells"
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
new file mode 100644
index 000000000000..e1ac08064425
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/partition.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Partition
+
+description: |
+ This binding describes a single flash partition. Each partition must have its
+ relative offset and size specified. Depending on partition function extra
+ properties can be used.
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+ reg:
+ description: partition's offset and size within the flash
+ maxItems: 1
+
+ label:
+ description: The label / name for this partition. If omitted, the label
+ is taken from the node name (excluding the unit address).
+
+ read-only:
+ description: This parameter, if present, is a hint that this partition
+ should only be mounted read-only. This is usually used for flash
+ partitions containing early-boot firmware images or data which should
+ not be clobbered.
+ type: boolean
+
+ lock:
+ description: Do not unlock the partition at initialization time (not
+ supported on all devices)
+ type: boolean
+
+ slc-mode:
+ description: This parameter, if present, allows one to emulate SLC mode
+ on a partition attached to an MLC NAND thus making this partition
+ immune to paired-pages corruptions
+ type: boolean
+
+required:
+ - reg
+
+additionalProperties: true
--
2.26.2
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh+dt@kernel.org>
Cc: "Boris Brezillon" <bbrezillon@kernel.org>,
linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, "Rafał Miłecki" <rafal@milecki.pl>,
"Rob Herring" <robh@kernel.org>
Subject: [PATCH V2 mtd/next 1/3] dt-bindings: mtd: move partition binding to its own file
Date: Thu, 11 Feb 2021 17:20:10 +0100 [thread overview]
Message-ID: <20210211162012.27417-1-zajec5@gmail.com> (raw)
From: Rafał Miłecki <rafal@milecki.pl>
Single partition binding is quite common and may be:
1. Used by multiple parsers
2. Extended for more specific cases
Move it to separated file to avoid code duplication.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../mtd/partitions/fixed-partitions.yaml | 33 +------------
.../bindings/mtd/partitions/partition.yaml | 47 +++++++++++++++++++
2 files changed, 48 insertions(+), 32 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/partitions/partition.yaml
diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
index 6d4a3450e064..ea4cace6a955 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
@@ -27,38 +27,7 @@ properties:
patternProperties:
"@[0-9a-f]+$":
- description: node describing a single flash partition
- type: object
-
- properties:
- reg:
- description: partition's offset and size within the flash
- maxItems: 1
-
- label:
- description: The label / name for this partition. If omitted, the label
- is taken from the node name (excluding the unit address).
-
- read-only:
- description: This parameter, if present, is a hint that this partition
- should only be mounted read-only. This is usually used for flash
- partitions containing early-boot firmware images or data which should
- not be clobbered.
- type: boolean
-
- lock:
- description: Do not unlock the partition at initialization time (not
- supported on all devices)
- type: boolean
-
- slc-mode:
- description: This parameter, if present, allows one to emulate SLC mode
- on a partition attached to an MLC NAND thus making this partition
- immune to paired-pages corruptions
- type: boolean
-
- required:
- - reg
+ $ref: "partition.yaml#"
required:
- "#address-cells"
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
new file mode 100644
index 000000000000..e1ac08064425
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/partition.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Partition
+
+description: |
+ This binding describes a single flash partition. Each partition must have its
+ relative offset and size specified. Depending on partition function extra
+ properties can be used.
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+ reg:
+ description: partition's offset and size within the flash
+ maxItems: 1
+
+ label:
+ description: The label / name for this partition. If omitted, the label
+ is taken from the node name (excluding the unit address).
+
+ read-only:
+ description: This parameter, if present, is a hint that this partition
+ should only be mounted read-only. This is usually used for flash
+ partitions containing early-boot firmware images or data which should
+ not be clobbered.
+ type: boolean
+
+ lock:
+ description: Do not unlock the partition at initialization time (not
+ supported on all devices)
+ type: boolean
+
+ slc-mode:
+ description: This parameter, if present, allows one to emulate SLC mode
+ on a partition attached to an MLC NAND thus making this partition
+ immune to paired-pages corruptions
+ type: boolean
+
+required:
+ - reg
+
+additionalProperties: true
--
2.26.2
next reply other threads:[~2021-02-11 16:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-11 16:20 Rafał Miłecki [this message]
2021-02-11 16:20 ` [PATCH V2 mtd/next 1/3] dt-bindings: mtd: move partition binding to its own file Rafał Miłecki
2021-02-11 16:20 ` [PATCH V2 mtd/next 2/3] dt-bindings: mtd: add binding for BCM4908 partitions Rafał Miłecki
2021-02-11 16:20 ` Rafał Miłecki
2021-02-11 16:20 ` [PATCH V2 mtd/next 3/3] mtd: parsers: ofpart: support BCM4908 fixed partitions Rafał Miłecki
2021-02-11 16:20 ` Rafał Miłecki
2021-02-11 19:22 ` kernel test robot
2021-02-11 19:22 ` kernel test robot
2021-02-11 19:22 ` kernel test robot
2021-02-11 19:49 ` kernel test robot
2021-02-11 19:49 ` kernel test robot
2021-02-11 19:49 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210211162012.27417-1-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=bbrezillon@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=rafal@milecki.pl \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.