All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: richard@nod.at, vigneshr@ti.com, robh+dt@kernel.org,
	linux-arm-msm@vger.kernel.org, linux-mtd@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	boris.brezillon@collabora.com
Subject: Re: [PATCH 2/3] dt-bindings: mtd: Add a property to declare secure regions in Qcom NANDc
Date: Tue, 23 Feb 2021 18:56:10 +0100	[thread overview]
Message-ID: <20210223185610.7f495406@xps13> (raw)
In-Reply-To: <20210223174546.GA27945@work>

Hi Manivannan,

Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote on Tue,
23 Feb 2021 23:15:46 +0530:

> Hi Miquel,
> 
> On Tue, Feb 23, 2021 at 05:49:22PM +0100, Miquel Raynal wrote:
> > Hi Manivannan,
> > 
> > Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote on Mon,
> > 22 Feb 2021 17:32:58 +0530:
> >   
> > > On a typical end product, a vendor may choose to secure some regions in
> > > the NAND memory which are supposed to stay intact between FW upgrades.
> > > The access to those regions will be blocked by a secure element like
> > > Trustzone. So the normal world software like Linux kernel should not
> > > touch these regions (including reading).
> > > 
> > > So let's add a property for declaring such secure regions so that the
> > > driver can skip touching them.
> > > 
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > ---
> > >  Documentation/devicetree/bindings/mtd/qcom,nandc.yaml | 7 +++++++
> > >  1 file changed, 7 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > index 84ad7ff30121..7500e20da9c1 100644
> > > --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > @@ -48,6 +48,13 @@ patternProperties:
> > >          enum:
> > >            - 512
> > >  
> > > +      qcom,secure-regions:
> > > +        $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +        description:
> > > +          Regions in the NAND memory which are protected using a secure element
> > > +          like Trustzone. This property contains the start address and size of
> > > +          the secure regions present (optional).  
> > 
> > What does this "(optional)" means? If you mean the property is optional
> > then it should be described accordingly in the yaml file, or am I
> > missing something?
> >   
> 
> IIUC, if a property is not listed under "required" section then it is
> optional. But I've added the quote here to just make it explicit.

Absolutely, I was just wondering why you mentioned it here. I don't
think it's useful, you can drop it.

> 
> > I wonder if it wouldn't be better to make this a NAND chip node
> > property. I don't think a qcom prefix is needed as potentially many
> > other SoCs might have the same "feature".
> > 
> > I'm fine adding support for it in the qcom driver only though.
> >   
> 
> Hmm, sounds good to me.
> 
> Thanks,
> Mani
> 
> > > +
> > >  allOf:
> > >    - $ref: "nand-controller.yaml#"
> > >    
> > 
> > Thanks,
> > Miquèl  


Thanks,
Miquèl

WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: devicetree@vger.kernel.org, vigneshr@ti.com, richard@nod.at,
	linux-kernel@vger.kernel.org, boris.brezillon@collabora.com,
	robh+dt@kernel.org, linux-mtd@lists.infradead.org,
	linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 2/3] dt-bindings: mtd: Add a property to declare secure regions in Qcom NANDc
Date: Tue, 23 Feb 2021 18:56:10 +0100	[thread overview]
Message-ID: <20210223185610.7f495406@xps13> (raw)
In-Reply-To: <20210223174546.GA27945@work>

Hi Manivannan,

Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote on Tue,
23 Feb 2021 23:15:46 +0530:

> Hi Miquel,
> 
> On Tue, Feb 23, 2021 at 05:49:22PM +0100, Miquel Raynal wrote:
> > Hi Manivannan,
> > 
> > Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote on Mon,
> > 22 Feb 2021 17:32:58 +0530:
> >   
> > > On a typical end product, a vendor may choose to secure some regions in
> > > the NAND memory which are supposed to stay intact between FW upgrades.
> > > The access to those regions will be blocked by a secure element like
> > > Trustzone. So the normal world software like Linux kernel should not
> > > touch these regions (including reading).
> > > 
> > > So let's add a property for declaring such secure regions so that the
> > > driver can skip touching them.
> > > 
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > ---
> > >  Documentation/devicetree/bindings/mtd/qcom,nandc.yaml | 7 +++++++
> > >  1 file changed, 7 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > index 84ad7ff30121..7500e20da9c1 100644
> > > --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > @@ -48,6 +48,13 @@ patternProperties:
> > >          enum:
> > >            - 512
> > >  
> > > +      qcom,secure-regions:
> > > +        $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +        description:
> > > +          Regions in the NAND memory which are protected using a secure element
> > > +          like Trustzone. This property contains the start address and size of
> > > +          the secure regions present (optional).  
> > 
> > What does this "(optional)" means? If you mean the property is optional
> > then it should be described accordingly in the yaml file, or am I
> > missing something?
> >   
> 
> IIUC, if a property is not listed under "required" section then it is
> optional. But I've added the quote here to just make it explicit.

Absolutely, I was just wondering why you mentioned it here. I don't
think it's useful, you can drop it.

> 
> > I wonder if it wouldn't be better to make this a NAND chip node
> > property. I don't think a qcom prefix is needed as potentially many
> > other SoCs might have the same "feature".
> > 
> > I'm fine adding support for it in the qcom driver only though.
> >   
> 
> Hmm, sounds good to me.
> 
> Thanks,
> Mani
> 
> > > +
> > >  allOf:
> > >    - $ref: "nand-controller.yaml#"
> > >    
> > 
> > Thanks,
> > Miquèl  


Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2021-02-23 17:57 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-22 12:02 [PATCH 0/3] Add support for secure regions in Qcom NANDc driver Manivannan Sadhasivam
2021-02-22 12:02 ` Manivannan Sadhasivam
2021-02-22 12:02 ` [PATCH 1/3] dt-bindings: mtd: Convert Qcom NANDc binding to YAML Manivannan Sadhasivam
2021-02-22 12:02   ` Manivannan Sadhasivam
2021-02-22 12:02 ` [PATCH 2/3] dt-bindings: mtd: Add a property to declare secure regions in Qcom NANDc Manivannan Sadhasivam
2021-02-22 12:02   ` Manivannan Sadhasivam
2021-02-23 16:49   ` Miquel Raynal
2021-02-23 16:49     ` Miquel Raynal
2021-02-23 17:45     ` Manivannan Sadhasivam
2021-02-23 17:45       ` Manivannan Sadhasivam
2021-02-23 17:56       ` Miquel Raynal [this message]
2021-02-23 17:56         ` Miquel Raynal
2021-03-05 23:36   ` Rob Herring
2021-03-05 23:36     ` Rob Herring
2021-03-08  5:31     ` Manivannan Sadhasivam
2021-03-08  5:31       ` Manivannan Sadhasivam
2021-03-10  2:32       ` Rob Herring
2021-03-10  2:32         ` Rob Herring
2021-03-10  3:45         ` Manivannan Sadhasivam
2021-03-10  3:45           ` Manivannan Sadhasivam
2021-02-22 12:02 ` [PATCH 3/3] mtd: rawnand: qcom: Add support for secure regions in NAND memory Manivannan Sadhasivam
2021-02-22 12:02   ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210223185610.7f495406@xps13 \
    --to=miquel.raynal@bootlin.com \
    --cc=boris.brezillon@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.