Re: [PATCH v2 1/2] dt-bindings: display: add bindings for newhaven,1.8-128160EF

[Rob Herring <robh@kernel.org>]

On Fri, Feb 12, 2021 at 10:53:35AM +0100, Daniel Mack wrote:
> This adds documentation for a new ILI9163 based, SPI connected display.
> 
> Signed-off-by: Daniel Mack <daniel@zonque.org>
> ---
>  .../bindings/display/ilitek,ili9163.txt       | 27 +++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9163.txt

Bindings are in schema format now.

> 
> diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9163.txt b/Documentation/devicetree/bindings/display/ilitek,ili9163.txt
> new file mode 100644
> index 0000000000000..fee119991c14e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/ilitek,ili9163.txt
> @@ -0,0 +1,27 @@
> +Ilitek ILI9163 display panels
> +
> +This binding is for display panels using an Ilitek ILI9163 controller in SPI
> +mode.
> +
> +Required properties:
> +- compatible:	"newhaven,1.8-128160EF", "ilitek,ili9163"
> +- dc-gpios:	D/C pin
> +- reset-gpios:	Reset pin
> +
> +The node for this driver must be a child node of a SPI controller, hence
> +all mandatory properties described in ../spi/spi-bus.txt must be specified.
> +
> +Optional properties:
> +- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
> +- backlight:	phandle of the backlight device attached to the panel
> +
> +Example:
> +	display@0{
> +		compatible = "newhaven,1.8-128160EF", "ilitek,ili9163"
> +		reg = <0>;
> +		spi-max-frequency = <32000000>;
> +		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> +		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
> +		rotation = <270>;
> +		backlight = <&backlight>;
> +	};
> -- 
> 2.29.2
>