Re: [PATCH v2 0/4] enable flexspi support on imx8mp

[Shawn Guo <shawnguo@kernel.org>]

On Tue, Mar 09, 2021 at 06:31:12AM +0100, Heiko Schocher wrote:
> 
> This series enables support for the SPI NOR on the
> imx8mp based phyboard-pollux-rdk board.
> 
> Patches new in v2:
> "spi: fspi: enable fspi driver for on imx8mp"
> which adds own compatible entry for imx8mp
> 
> and seperate in own patch the documentation entry in
> patch "dt-bindings: spi: add compatible entry for imx8mp in FlexSPI controller"
> as checkpatch says:
> 
> warning: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> 
> 
> Changes in v2:
> - work in comments from Marco
>   add own compatible entry for imx8mp
> - work in comments from Marco
>   - add own compatible entry "nxp,imx8mp-fspi"
>   - reworked order of properties as Marco mentioned
> - work in comments from Marco and Teresa
>   - rename node into "'som_flash: flash@0 { }"
>   - compatible is now first entry
>   - removed #size-cells and #address-cells
>     as no child node. If bootloader adds them bootloader
>     can add them too.
> 
> Heiko Schocher (4):
>   spi: fspi: enable fspi driver for on imx8mp
>   dt-bindings: spi: add compatible entry for imx8mp in FlexSPI
>     controller
>   arm64: dts: imx8mp: add flexspi node
>   arm64: imx8mp: imx8mp-phycore-som enable spi nor

Two DTS patch look good.  Ping me when driver and bindings changes are
accepted.

Shawn