From: Rob Herring <robh@kernel.org>
To: Liu Ying <victor.liu@nxp.com>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
airlied@linux.ie, daniel@ffwll.ch, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com, mchehab@kernel.org,
a.hajda@samsung.com, narmstrong@baylibre.com,
Laurent.pinchart@ideasonboard.com, jonas@kwiboo.se,
jernej.skrabec@siol.net, kishon@ti.com, vkoul@kernel.org,
robert.foss@linaro.org, lee.jones@linaro.org
Subject: Re: [PATCH v5 07/14] dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding
Date: Tue, 16 Mar 2021 16:38:50 -0600 [thread overview]
Message-ID: <20210316223850.GA3806545@robh.at.kernel.org> (raw)
In-Reply-To: <1615370138-5673-8-git-send-email-victor.liu@nxp.com>
On Wed, Mar 10, 2021 at 05:55:31PM +0800, Liu Ying wrote:
> This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.
>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> v4->v5:
> * Newly introduced in v5. (Rob)
>
> .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml | 202 +++++++++++++++++++++
> 1 file changed, 202 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> new file mode 100644
> index 00000000..0e724d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> @@ -0,0 +1,202 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings
> +
> +maintainers:
> + - Liu Ying <victor.liu@nxp.com>
> +
> +description: |
> + As a system controller, the Freescale i.MX8qm/qxp Control and Status
> + Registers(CSR) module represents a set of miscellaneous registers of a
> + specific subsystem. It may provide control and/or status report interfaces
> + to a mix of standalone hardware devices within that subsystem. One typical
> + use-case is for some other nodes to acquire a reference to the syscon node
> + by phandle, and the other typical use-case is that the operating system
> + should consider all subnodes of the CSR module as separate child devices.
> +
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx8qxp-mipi-lvds-csr
> + - fsl,imx8qm-lvds-csr
You shouldn't need this, we filter out 'syscon' and 'simple-mfd'.
> + required:
> + - compatible
> +
> +properties:
> + $nodename:
> + pattern: "^syscon@[0-9a-f]+$"
> +
> + compatible:
> + items:
> + - enum:
> + - fsl,imx8qxp-mipi-lvds-csr
> + - fsl,imx8qm-lvds-csr
> + - const: syscon
> + - const: simple-mfd
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + const: ipg
> +
> +patternProperties:
> + "^(ldb|phy|pxl2dpi)$":
> + type: object
> + description: The possible child devices of the CSR module.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: fsl,imx8qxp-mipi-lvds-csr
> + then:
> + required:
> + - pxl2dpi
> + - ldb
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: fsl,imx8qm-lvds-csr
> + then:
> + required:
> + - phy
> + - ldb
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx8-lpcg.h>
> + #include <dt-bindings/firmware/imx/rsrc.h>
> + mipi_lvds_0_csr: syscon@56221000 {
> + compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
> + reg = <0x56221000 0x1000>;
> + clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "ipg";
> +
> + mipi_lvds_0_pxl2dpi: pxl2dpi {
> + compatible = "fsl,imx8qxp-pxl2dpi";
> + fsl,sc-resource = <IMX_SC_R_MIPI_0>;
> + power-domains = <&pd IMX_SC_R_MIPI_0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
> + };
> +
> + mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
> + };
> + };
> +
> + port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
> + };
> +
> + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
> + };
> + };
> + };
> + };
> +
> + mipi_lvds_0_ldb: ldb {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8qxp-ldb";
> + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
> + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
> + clock-names = "pixel", "bypass";
> + power-domains = <&pd IMX_SC_R_LVDS_0>;
> +
> + channel@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + phys = <&mipi_lvds_0_phy>;
> + phy-names = "lvds_phy";
> +
> + port@0 {
> + reg = <0>;
> +
> + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
> + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + /* ... */
> + };
> + };
> +
> + channel@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + phys = <&mipi_lvds_0_phy>;
> + phy-names = "lvds_phy";
> +
> + port@0 {
> + reg = <0>;
> +
> + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
> + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + /* ... */
> + };
> + };
> + };
> + };
> +
> + mipi_lvds_0_phy: phy@56228300 {
> + compatible = "fsl,imx8qxp-mipi-dphy";
> + reg = <0x56228300 0x100>;
> + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
> + clock-names = "phy_ref";
> + #phy-cells = <0>;
> + fsl,syscon = <&mipi_lvds_0_csr>;
> + power-domains = <&pd IMX_SC_R_MIPI_0>;
> + };
> --
> 2.7.4
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Liu Ying <victor.liu@nxp.com>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
airlied@linux.ie, daniel@ffwll.ch, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com, mchehab@kernel.org,
a.hajda@samsung.com, narmstrong@baylibre.com,
Laurent.pinchart@ideasonboard.com, jonas@kwiboo.se,
jernej.skrabec@siol.net, kishon@ti.com, vkoul@kernel.org,
robert.foss@linaro.org, lee.jones@linaro.org
Subject: Re: [PATCH v5 07/14] dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding
Date: Tue, 16 Mar 2021 16:38:50 -0600 [thread overview]
Message-ID: <20210316223850.GA3806545@robh.at.kernel.org> (raw)
In-Reply-To: <1615370138-5673-8-git-send-email-victor.liu@nxp.com>
On Wed, Mar 10, 2021 at 05:55:31PM +0800, Liu Ying wrote:
> This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.
>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> v4->v5:
> * Newly introduced in v5. (Rob)
>
> .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml | 202 +++++++++++++++++++++
> 1 file changed, 202 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> new file mode 100644
> index 00000000..0e724d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> @@ -0,0 +1,202 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings
> +
> +maintainers:
> + - Liu Ying <victor.liu@nxp.com>
> +
> +description: |
> + As a system controller, the Freescale i.MX8qm/qxp Control and Status
> + Registers(CSR) module represents a set of miscellaneous registers of a
> + specific subsystem. It may provide control and/or status report interfaces
> + to a mix of standalone hardware devices within that subsystem. One typical
> + use-case is for some other nodes to acquire a reference to the syscon node
> + by phandle, and the other typical use-case is that the operating system
> + should consider all subnodes of the CSR module as separate child devices.
> +
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx8qxp-mipi-lvds-csr
> + - fsl,imx8qm-lvds-csr
You shouldn't need this, we filter out 'syscon' and 'simple-mfd'.
> + required:
> + - compatible
> +
> +properties:
> + $nodename:
> + pattern: "^syscon@[0-9a-f]+$"
> +
> + compatible:
> + items:
> + - enum:
> + - fsl,imx8qxp-mipi-lvds-csr
> + - fsl,imx8qm-lvds-csr
> + - const: syscon
> + - const: simple-mfd
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + const: ipg
> +
> +patternProperties:
> + "^(ldb|phy|pxl2dpi)$":
> + type: object
> + description: The possible child devices of the CSR module.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: fsl,imx8qxp-mipi-lvds-csr
> + then:
> + required:
> + - pxl2dpi
> + - ldb
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: fsl,imx8qm-lvds-csr
> + then:
> + required:
> + - phy
> + - ldb
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx8-lpcg.h>
> + #include <dt-bindings/firmware/imx/rsrc.h>
> + mipi_lvds_0_csr: syscon@56221000 {
> + compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
> + reg = <0x56221000 0x1000>;
> + clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "ipg";
> +
> + mipi_lvds_0_pxl2dpi: pxl2dpi {
> + compatible = "fsl,imx8qxp-pxl2dpi";
> + fsl,sc-resource = <IMX_SC_R_MIPI_0>;
> + power-domains = <&pd IMX_SC_R_MIPI_0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
> + };
> +
> + mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
> + };
> + };
> +
> + port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
> + };
> +
> + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
> + };
> + };
> + };
> + };
> +
> + mipi_lvds_0_ldb: ldb {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8qxp-ldb";
> + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
> + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
> + clock-names = "pixel", "bypass";
> + power-domains = <&pd IMX_SC_R_LVDS_0>;
> +
> + channel@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + phys = <&mipi_lvds_0_phy>;
> + phy-names = "lvds_phy";
> +
> + port@0 {
> + reg = <0>;
> +
> + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
> + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + /* ... */
> + };
> + };
> +
> + channel@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + phys = <&mipi_lvds_0_phy>;
> + phy-names = "lvds_phy";
> +
> + port@0 {
> + reg = <0>;
> +
> + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
> + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + /* ... */
> + };
> + };
> + };
> + };
> +
> + mipi_lvds_0_phy: phy@56228300 {
> + compatible = "fsl,imx8qxp-mipi-dphy";
> + reg = <0x56228300 0x100>;
> + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
> + clock-names = "phy_ref";
> + #phy-cells = <0>;
> + fsl,syscon = <&mipi_lvds_0_csr>;
> + power-domains = <&pd IMX_SC_R_MIPI_0>;
> + };
> --
> 2.7.4
>
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Liu Ying <victor.liu@nxp.com>
Cc: narmstrong@baylibre.com, airlied@linux.ie,
dri-devel@lists.freedesktop.org, a.hajda@samsung.com,
Laurent.pinchart@ideasonboard.com, lee.jones@linaro.org,
kishon@ti.com, linux-imx@nxp.com, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, jonas@kwiboo.se,
s.hauer@pengutronix.de, mchehab@kernel.org,
linux-arm-kernel@lists.infradead.org, jernej.skrabec@siol.net,
linux-kernel@vger.kernel.org, robert.foss@linaro.org,
vkoul@kernel.org, kernel@pengutronix.de, shawnguo@kernel.org
Subject: Re: [PATCH v5 07/14] dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding
Date: Tue, 16 Mar 2021 16:38:50 -0600 [thread overview]
Message-ID: <20210316223850.GA3806545@robh.at.kernel.org> (raw)
In-Reply-To: <1615370138-5673-8-git-send-email-victor.liu@nxp.com>
On Wed, Mar 10, 2021 at 05:55:31PM +0800, Liu Ying wrote:
> This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.
>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> v4->v5:
> * Newly introduced in v5. (Rob)
>
> .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml | 202 +++++++++++++++++++++
> 1 file changed, 202 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> new file mode 100644
> index 00000000..0e724d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> @@ -0,0 +1,202 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings
> +
> +maintainers:
> + - Liu Ying <victor.liu@nxp.com>
> +
> +description: |
> + As a system controller, the Freescale i.MX8qm/qxp Control and Status
> + Registers(CSR) module represents a set of miscellaneous registers of a
> + specific subsystem. It may provide control and/or status report interfaces
> + to a mix of standalone hardware devices within that subsystem. One typical
> + use-case is for some other nodes to acquire a reference to the syscon node
> + by phandle, and the other typical use-case is that the operating system
> + should consider all subnodes of the CSR module as separate child devices.
> +
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx8qxp-mipi-lvds-csr
> + - fsl,imx8qm-lvds-csr
You shouldn't need this, we filter out 'syscon' and 'simple-mfd'.
> + required:
> + - compatible
> +
> +properties:
> + $nodename:
> + pattern: "^syscon@[0-9a-f]+$"
> +
> + compatible:
> + items:
> + - enum:
> + - fsl,imx8qxp-mipi-lvds-csr
> + - fsl,imx8qm-lvds-csr
> + - const: syscon
> + - const: simple-mfd
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + const: ipg
> +
> +patternProperties:
> + "^(ldb|phy|pxl2dpi)$":
> + type: object
> + description: The possible child devices of the CSR module.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: fsl,imx8qxp-mipi-lvds-csr
> + then:
> + required:
> + - pxl2dpi
> + - ldb
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: fsl,imx8qm-lvds-csr
> + then:
> + required:
> + - phy
> + - ldb
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx8-lpcg.h>
> + #include <dt-bindings/firmware/imx/rsrc.h>
> + mipi_lvds_0_csr: syscon@56221000 {
> + compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
> + reg = <0x56221000 0x1000>;
> + clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "ipg";
> +
> + mipi_lvds_0_pxl2dpi: pxl2dpi {
> + compatible = "fsl,imx8qxp-pxl2dpi";
> + fsl,sc-resource = <IMX_SC_R_MIPI_0>;
> + power-domains = <&pd IMX_SC_R_MIPI_0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
> + };
> +
> + mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
> + };
> + };
> +
> + port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
> + };
> +
> + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
> + };
> + };
> + };
> + };
> +
> + mipi_lvds_0_ldb: ldb {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8qxp-ldb";
> + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
> + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
> + clock-names = "pixel", "bypass";
> + power-domains = <&pd IMX_SC_R_LVDS_0>;
> +
> + channel@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + phys = <&mipi_lvds_0_phy>;
> + phy-names = "lvds_phy";
> +
> + port@0 {
> + reg = <0>;
> +
> + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
> + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + /* ... */
> + };
> + };
> +
> + channel@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + phys = <&mipi_lvds_0_phy>;
> + phy-names = "lvds_phy";
> +
> + port@0 {
> + reg = <0>;
> +
> + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
> + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + /* ... */
> + };
> + };
> + };
> + };
> +
> + mipi_lvds_0_phy: phy@56228300 {
> + compatible = "fsl,imx8qxp-mipi-dphy";
> + reg = <0x56228300 0x100>;
> + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
> + clock-names = "phy_ref";
> + #phy-cells = <0>;
> + fsl,syscon = <&mipi_lvds_0_csr>;
> + power-domains = <&pd IMX_SC_R_MIPI_0>;
> + };
> --
> 2.7.4
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2021-03-16 22:40 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-10 9:55 [PATCH v5 00/14] Add some DRM bridge drivers support for i.MX8qm/qxp SoCs Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` [PATCH v5 01/14] media: uapi: Add some RGB bus formats for i.MX8qm/qxp pixel combiner Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 13:45 ` Laurent Pinchart
2021-03-10 13:45 ` Laurent Pinchart
2021-03-10 13:45 ` Laurent Pinchart
2021-03-10 9:55 ` [PATCH v5 02/14] media: docs: " Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 13:24 ` Laurent Pinchart
2021-03-10 13:24 ` Laurent Pinchart
2021-03-10 13:24 ` Laurent Pinchart
2021-03-11 5:26 ` Liu Ying
2021-03-11 5:26 ` Liu Ying
2021-03-11 5:26 ` Liu Ying
2021-03-10 9:55 ` [PATCH v5 03/14] dt-bindings: display: bridge: Add i.MX8qm/qxp pixel combiner binding Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` [PATCH v5 04/14] drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` [PATCH v5 05/14] dt-bindings: display: bridge: Add i.MX8qm/qxp display pixel link binding Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` [PATCH v5 06/14] drm/bridge: imx: Add i.MX8qm/qxp display pixel link support Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` [PATCH v5 07/14] dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-16 22:38 ` Rob Herring [this message]
2021-03-16 22:38 ` Rob Herring
2021-03-16 22:38 ` Rob Herring
2021-03-17 2:04 ` Liu Ying
2021-03-17 2:04 ` Liu Ying
2021-03-17 2:04 ` Liu Ying
2021-03-10 9:55 ` [PATCH v5 08/14] dt-bindings: display: bridge: Add i.MX8qxp pixel link to DPI binding Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-16 22:40 ` Rob Herring
2021-03-16 22:40 ` Rob Herring
2021-03-16 22:40 ` Rob Herring
2021-03-10 9:55 ` [PATCH v5 09/14] drm/bridge: imx: Add i.MX8qxp pixel link to DPI support Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` [PATCH v5 10/14] drm/bridge: imx: Add LDB driver helper support Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` [PATCH v5 11/14] dt-bindings: display: bridge: Add i.MX8qm/qxp LVDS display bridge binding Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` [PATCH v5 12/14] drm/bridge: imx: Add LDB support for i.MX8qxp Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 12:16 ` kernel test robot
2021-03-10 12:16 ` kernel test robot
2021-03-10 12:16 ` kernel test robot
2021-03-10 12:16 ` kernel test robot
2021-03-10 19:38 ` kernel test robot
2021-03-10 19:38 ` kernel test robot
2021-03-10 19:38 ` kernel test robot
2021-03-10 19:38 ` kernel test robot
2021-03-10 9:55 ` [PATCH v5 13/14] drm/bridge: imx: Add LDB support for i.MX8qm Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 13:25 ` kernel test robot
2021-03-10 13:25 ` kernel test robot
2021-03-10 13:25 ` kernel test robot
2021-03-10 13:25 ` kernel test robot
2021-03-10 9:55 ` [PATCH v5 14/14] MAINTAINERS: add maintainer for DRM bridge drivers for i.MX SoCs Liu Ying
2021-03-10 9:55 ` Liu Ying
2021-03-10 9:55 ` Liu Ying
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210316223850.GA3806545@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=festevam@gmail.com \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=kernel@pengutronix.de \
--cc=kishon@ti.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=narmstrong@baylibre.com \
--cc=robert.foss@linaro.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=victor.liu@nxp.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.