From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
To: Cye Borg <cyborgyn@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
linux-doc@vger.kernel.org, linux-alpha@vger.kernel.org,
linux-kernel@vger.kernel.org, Christoph Hellwig <hch@lst.de>,
linux-ide@vger.kernel.org, linux-m68k@lists.linux-m68k.org,
Geert Uytterhoeven <geert@linux-m68k.org>,
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>,
Ivan Kokshaysky <ink@jurassic.park.msu.ru>,
Matt Turner <mattst88@gmail.com>,
linux-mips@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
"David S. Miller" <davem@davemloft.net>,
linux-arm-kernel@lists.infradead.org,
Richard Henderson <rth@twiddle.net>
Subject: Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
Date: Tue, 23 Mar 2021 18:43:21 +0000 [thread overview]
Message-ID: <20210323184321.GE1463@shell.armlinux.org.uk> (raw)
In-Reply-To: <CAD4NMuZWoV0m85OyBDHLt+J8NYCV5wYx7fFZaivBNEgDnrN5xw@mail.gmail.com>
On Mon, Mar 22, 2021 at 06:10:01PM +0100, Cye Borg wrote:
> PWS 500au:
>
> snow / # lspci -vvx -s 7.1
> 00:07.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [ISA
> Compatibility mode-only controller, supports bus mastering])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 0
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4
> Region 4: I/O ports at 9080 [size=16]
> Kernel driver in use: pata_cypress
> Kernel modules: pata_cypress
> 00: 80 10 93 c6 45 00 80 02 00 80 01 01 00 00 80 00
> 10: f1 01 00 00 f5 03 00 00 00 00 00 00 00 00 00 00
> 20: 81 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
>
> snow / # lspci -vvx -s 7.2
> 00:07.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 [ISA
> Compatibility mode-only controller])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 0
> Region 0: I/O ports at 0170 [size=8]
> Region 1: I/O ports at 0374
> Region 4: Memory at 0c240000 (32-bit, non-prefetchable)
> [disabled] [size=64K]
> Kernel modules: pata_cypress
> 00: 80 10 93 c6 45 00 80 02 00 00 01 01 00 00 80 00
> 10: 71 01 00 00 75 03 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 24 0c 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
Thanks very much.
Could I also ask for the output of:
# lspci -vxxx -s 7.0
as well please - this will dump all 256 bytes for the ISA bridge, which
contains a bunch of configuration registers. Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
WARNING: multiple messages have this Message-ID (diff)
From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
To: Cye Borg <cyborgyn@gmail.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>,
Christoph Hellwig <hch@lst.de>,
"David S. Miller" <davem@davemloft.net>,
Jens Axboe <axboe@kernel.dk>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Richard Henderson <rth@twiddle.net>,
Ivan Kokshaysky <ink@jurassic.park.msu.ru>,
Matt Turner <mattst88@gmail.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Michael Ellerman <mpe@ellerman.id.au>,
linux-ide@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-alpha@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-m68k@lists.linux-m68k.org, linux-mips@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
Date: Tue, 23 Mar 2021 18:43:21 +0000 [thread overview]
Message-ID: <20210323184321.GE1463@shell.armlinux.org.uk> (raw)
In-Reply-To: <CAD4NMuZWoV0m85OyBDHLt+J8NYCV5wYx7fFZaivBNEgDnrN5xw@mail.gmail.com>
On Mon, Mar 22, 2021 at 06:10:01PM +0100, Cye Borg wrote:
> PWS 500au:
>
> snow / # lspci -vvx -s 7.1
> 00:07.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [ISA
> Compatibility mode-only controller, supports bus mastering])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 0
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4
> Region 4: I/O ports at 9080 [size=16]
> Kernel driver in use: pata_cypress
> Kernel modules: pata_cypress
> 00: 80 10 93 c6 45 00 80 02 00 80 01 01 00 00 80 00
> 10: f1 01 00 00 f5 03 00 00 00 00 00 00 00 00 00 00
> 20: 81 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
>
> snow / # lspci -vvx -s 7.2
> 00:07.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 [ISA
> Compatibility mode-only controller])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 0
> Region 0: I/O ports at 0170 [size=8]
> Region 1: I/O ports at 0374
> Region 4: Memory at 0c240000 (32-bit, non-prefetchable)
> [disabled] [size=64K]
> Kernel modules: pata_cypress
> 00: 80 10 93 c6 45 00 80 02 00 00 01 01 00 00 80 00
> 10: 71 01 00 00 75 03 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 24 0c 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
Thanks very much.
Could I also ask for the output of:
# lspci -vxxx -s 7.0
as well please - this will dump all 256 bytes for the ISA bridge, which
contains a bunch of configuration registers. Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
WARNING: multiple messages have this Message-ID (diff)
From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
To: Cye Borg <cyborgyn@gmail.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>,
Christoph Hellwig <hch@lst.de>,
"David S. Miller" <davem@davemloft.net>,
Jens Axboe <axboe@kernel.dk>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Richard Henderson <rth@twiddle.net>,
Ivan Kokshaysky <ink@jurassic.park.msu.ru>,
Matt Turner <mattst88@gmail.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Michael Ellerman <mpe@ellerman.id.au>,
linux-ide@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-alpha@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-m68k@lists.linux-m68k.org, linux-mips@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
Date: Tue, 23 Mar 2021 18:43:21 +0000 [thread overview]
Message-ID: <20210323184321.GE1463@shell.armlinux.org.uk> (raw)
In-Reply-To: <CAD4NMuZWoV0m85OyBDHLt+J8NYCV5wYx7fFZaivBNEgDnrN5xw@mail.gmail.com>
On Mon, Mar 22, 2021 at 06:10:01PM +0100, Cye Borg wrote:
> PWS 500au:
>
> snow / # lspci -vvx -s 7.1
> 00:07.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [ISA
> Compatibility mode-only controller, supports bus mastering])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 0
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4
> Region 4: I/O ports at 9080 [size=16]
> Kernel driver in use: pata_cypress
> Kernel modules: pata_cypress
> 00: 80 10 93 c6 45 00 80 02 00 80 01 01 00 00 80 00
> 10: f1 01 00 00 f5 03 00 00 00 00 00 00 00 00 00 00
> 20: 81 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
>
> snow / # lspci -vvx -s 7.2
> 00:07.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 [ISA
> Compatibility mode-only controller])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 0
> Region 0: I/O ports at 0170 [size=8]
> Region 1: I/O ports at 0374
> Region 4: Memory at 0c240000 (32-bit, non-prefetchable)
> [disabled] [size=64K]
> Kernel modules: pata_cypress
> 00: 80 10 93 c6 45 00 80 02 00 00 01 01 00 00 80 00
> 10: 71 01 00 00 75 03 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 24 0c 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
Thanks very much.
Could I also ask for the output of:
# lspci -vxxx -s 7.0
as well please - this will dump all 256 bytes for the ISA bridge, which
contains a bunch of configuration registers. Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-23 18:43 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-18 4:56 remove the legacy ide driver Christoph Hellwig
2021-03-18 4:56 ` Christoph Hellwig
2021-03-18 4:56 ` Christoph Hellwig
2021-03-18 4:56 ` [PATCH 01/10] alpha: use libata instead of " Christoph Hellwig
2021-03-18 4:56 ` Christoph Hellwig
2021-03-18 4:56 ` Christoph Hellwig
2021-03-18 5:54 ` Al Viro
2021-03-18 5:54 ` Al Viro
2021-03-18 5:54 ` Al Viro
2021-03-18 6:07 ` Christoph Hellwig
2021-03-18 6:07 ` Christoph Hellwig
2021-03-18 6:07 ` Christoph Hellwig
2021-03-18 17:09 ` Måns Rullgård
2021-03-18 17:09 ` Måns Rullgård
2021-03-18 17:09 ` Måns Rullgård
2021-03-18 18:03 ` Måns Rullgård
2021-03-18 18:03 ` Måns Rullgård
2021-03-18 18:03 ` Måns Rullgård
2021-03-18 7:54 ` John Paul Adrian Glaubitz
2021-03-18 7:54 ` John Paul Adrian Glaubitz
2021-03-18 7:54 ` John Paul Adrian Glaubitz
2021-03-19 16:23 ` Serge Belyshev
2021-03-19 16:23 ` Serge Belyshev
2021-03-19 16:23 ` Serge Belyshev
2021-03-18 4:56 ` [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig Christoph Hellwig
2021-03-18 4:56 ` Christoph Hellwig
2021-03-18 4:56 ` Christoph Hellwig
2021-03-19 17:07 ` Russell King - ARM Linux admin
2021-03-19 17:07 ` Russell King - ARM Linux admin
2021-03-19 17:07 ` Russell King - ARM Linux admin
2021-03-19 17:53 ` Russell King - ARM Linux admin
2021-03-19 17:53 ` Russell King - ARM Linux admin
2021-03-19 17:53 ` Russell King - ARM Linux admin
2021-03-22 14:54 ` Christoph Hellwig
2021-03-22 14:54 ` Christoph Hellwig
2021-03-22 14:54 ` Christoph Hellwig
2021-03-22 15:15 ` Russell King - ARM Linux admin
2021-03-22 15:15 ` Russell King - ARM Linux admin
2021-03-22 15:15 ` Russell King - ARM Linux admin
2021-03-22 15:18 ` Christoph Hellwig
2021-03-22 15:18 ` Christoph Hellwig
2021-03-22 15:18 ` Christoph Hellwig
2021-03-22 15:33 ` Christoph Hellwig
2021-03-22 15:33 ` Christoph Hellwig
2021-03-22 15:33 ` Christoph Hellwig
2021-03-23 14:03 ` Russell King - ARM Linux admin
2021-03-23 14:03 ` Russell King - ARM Linux admin
2021-03-23 14:03 ` Russell King - ARM Linux admin
2021-03-22 15:44 ` Cye Borg
2021-03-22 16:59 ` Russell King - ARM Linux admin
2021-03-22 16:59 ` Russell King - ARM Linux admin
2021-03-22 16:59 ` Russell King - ARM Linux admin
2021-03-22 16:09 ` John Paul Adrian Glaubitz
2021-03-22 16:09 ` John Paul Adrian Glaubitz
2021-03-22 16:09 ` John Paul Adrian Glaubitz
2021-03-22 16:43 ` Cye Borg
2021-03-22 16:47 ` Cye Borg
2021-03-22 16:47 ` Cye Borg
2021-03-22 16:47 ` Cye Borg
2021-03-22 17:03 ` Russell King - ARM Linux admin
2021-03-22 17:03 ` Russell King - ARM Linux admin
2021-03-22 17:03 ` Russell King - ARM Linux admin
2021-03-22 17:10 ` Cye Borg
2021-03-22 17:10 ` Cye Borg
2021-03-22 17:10 ` Cye Borg
2021-03-23 18:43 ` Russell King - ARM Linux admin [this message]
2021-03-23 18:43 ` Russell King - ARM Linux admin
2021-03-23 18:43 ` Russell King - ARM Linux admin
2021-03-24 5:47 ` Cye Borg
2021-03-24 5:47 ` Cye Borg
2021-03-24 5:47 ` Cye Borg
2021-03-18 4:56 ` [PATCH 03/10] ARM: disable CONFIG_IDE in pxa_defconfig Christoph Hellwig
2021-03-18 4:56 ` Christoph Hellwig
2021-03-18 4:56 ` Christoph Hellwig
2021-03-18 4:57 ` [PATCH 04/10] MIPS: disable CONFIG_IDE in sb1250_swarm_defconfig Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-19 0:12 ` Maciej W. Rozycki
2021-03-19 0:12 ` Maciej W. Rozycki
2021-03-19 0:12 ` Maciej W. Rozycki
2021-03-24 9:59 ` Thomas Bogendoerfer
2021-03-24 9:59 ` Thomas Bogendoerfer
2021-03-24 9:59 ` Thomas Bogendoerfer
2021-03-18 4:57 ` [PATCH 05/10] MIPS: switch workpad_defconfig from legacy IDE to libata Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-24 10:00 ` Thomas Bogendoerfer
2021-03-24 10:00 ` Thomas Bogendoerfer
2021-03-24 10:00 ` Thomas Bogendoerfer
2021-03-18 4:57 ` [PATCH 06/10] MIPS: disable CONFIG_IDE in rbtx49xx_defconfig Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-24 10:00 ` Thomas Bogendoerfer
2021-03-24 10:00 ` Thomas Bogendoerfer
2021-03-24 10:00 ` Thomas Bogendoerfer
2021-03-18 4:57 ` [PATCH 07/10] MIPS: disable CONFIG_IDE in bigsur_defconfig Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-18 10:08 ` Sergei Shtylyov
2021-03-18 10:08 ` Sergei Shtylyov
2021-03-18 10:08 ` Sergei Shtylyov
2021-03-24 10:00 ` Thomas Bogendoerfer
2021-03-24 10:00 ` Thomas Bogendoerfer
2021-03-24 10:00 ` Thomas Bogendoerfer
2021-03-18 4:57 ` [PATCH 08/10] MIPS: disable CONFIG_IDE in malta*_defconfig Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-18 10:12 ` Sergei Shtylyov
2021-03-18 10:12 ` Sergei Shtylyov
2021-03-18 10:12 ` Sergei Shtylyov
2021-03-18 14:19 ` Thomas Bogendoerfer
2021-03-18 14:19 ` Thomas Bogendoerfer
2021-03-18 14:19 ` Thomas Bogendoerfer
2021-03-19 13:03 ` Christoph Hellwig
2021-03-19 13:03 ` Christoph Hellwig
2021-03-19 13:03 ` Christoph Hellwig
2021-03-24 10:01 ` Thomas Bogendoerfer
2021-03-24 10:01 ` Thomas Bogendoerfer
2021-03-24 10:01 ` Thomas Bogendoerfer
2021-03-18 4:57 ` [PATCH 09/10] m68k: use libata instead of the legacy ide driver Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-18 4:57 ` [PATCH 10/10] ide: remove " Christoph Hellwig
2021-03-18 4:57 ` Christoph Hellwig
2021-03-20 3:44 ` Maciej W. Rozycki
2021-03-20 3:44 ` Maciej W. Rozycki
2021-03-20 3:44 ` Maciej W. Rozycki
2021-03-20 4:04 ` Maciej W. Rozycki
2021-03-20 4:04 ` Maciej W. Rozycki
2021-03-20 4:04 ` Maciej W. Rozycki
2021-03-19 1:43 ` Finn Thain
2021-03-19 1:43 ` Finn Thain
2021-03-19 1:43 ` Finn Thain
2021-03-19 5:43 ` Christoph Hellwig
2021-03-19 5:43 ` Christoph Hellwig
2021-03-19 5:43 ` Christoph Hellwig
2021-03-19 16:48 ` Maciej W. Rozycki
2021-03-19 16:48 ` Maciej W. Rozycki
2021-03-19 16:48 ` Maciej W. Rozycki
2021-03-21 9:20 ` John Paul Adrian Glaubitz
2021-03-21 9:20 ` John Paul Adrian Glaubitz
2021-03-21 9:20 ` John Paul Adrian Glaubitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210323184321.GE1463@shell.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=axboe@kernel.dk \
--cc=cyborgyn@gmail.com \
--cc=davem@davemloft.net \
--cc=geert@linux-m68k.org \
--cc=glaubitz@physik.fu-berlin.de \
--cc=hch@lst.de \
--cc=ink@jurassic.park.msu.ru \
--cc=linux-alpha@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linux-mips@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mattst88@gmail.com \
--cc=rth@twiddle.net \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.