All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <rmk+kernel@armlinux.org.uk>,
	kuba@kernel.org
Cc: "Marek Behún" <kabel@kernel.org>
Subject: [PATCH net-next v2 11/12] net: phy: marvell10g: print exact model
Date: Thu, 25 Mar 2021 14:12:49 +0100	[thread overview]
Message-ID: <20210325131250.15901-12-kabel@kernel.org> (raw)
In-Reply-To: <20210325131250.15901-1-kabel@kernel.org>

Print exact mode, one of
  88E2110
  88E2111
  88E2180
  88E2181
  88X3310
  88X3310P
  88X3340
  88X3340P

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/net/phy/marvell10g.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 6df67c12f012..84f24fcb832c 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -33,6 +33,8 @@
 #define MV_PHY_ALASKA_NBT_QUIRK_REV	(MARVELL_PHY_ID_88X3310 | 0xa)
 
 enum {
+	MV_PMA_XGSTAT		= 0xc001,
+	MV_PMA_XGSTAT_NO_MACSEC	= BIT(12),
 	MV_PMA_FW_VER0		= 0xc011,
 	MV_PMA_FW_VER1		= 0xc012,
 	MV_PMA_21X0_PORT_CTRL	= 0xc04a,
@@ -397,6 +399,7 @@ static int mv3310_probe(struct phy_device *phydev)
 {
 	struct mv3310_priv *priv;
 	u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
+	bool has_5g, has_macsec;
 	int ret, nports;
 
 	if (!phydev->is_c45 ||
@@ -443,12 +446,24 @@ static int mv3310_probe(struct phy_device *phydev)
 
 	switch (phydev->drv->phy_id) {
 	case MARVELL_PHY_ID_88X3310:
+		ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_XGSTAT);
+		if (ret < 0)
+			return ret;
+
+		has_macsec = !(ret & MV_PMA_XGSTAT_NO_MACSEC);
+
 		if (nports == 4)
 			priv->model = MV_MODEL_88X3340;
 		else if (nports == 1)
 			priv->model = MV_MODEL_88X3310;
 		break;
 	case MARVELL_PHY_ID_88E2110:
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_SPEED);
+		if (ret < 0)
+			return ret;
+
+		has_5g = ret & MDIO_PCS_SPEED_5G;
+
 		if (nports == 8)
 			priv->model = MV_MODEL_88E218X;
 		else if (nports == 1)
@@ -458,7 +473,17 @@ static int mv3310_probe(struct phy_device *phydev)
 		unreachable();
 	}
 
-	if (!priv->model) {
+	switch (priv->model) {
+	case MV_MODEL_88E211X:
+	case MV_MODEL_88E218X:
+		phydev_info(phydev, "model 88E21%d%d\n", nports, !has_5g);
+		break;
+	case MV_MODEL_88X3310:
+	case MV_MODEL_88X3340:
+		phydev_info(phydev, "model 88X33%d0%s\n", nports,
+			    has_macsec ? "P" : "");
+		break;
+	default:
 		phydev_err(phydev, "unknown PHY model (nports = %i)\n", nports);
 		return -ENODEV;
 	}
-- 
2.26.2


  parent reply	other threads:[~2021-03-25 13:14 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-25 13:12 [PATCH net-next v2 00/12] net: phy: marvell10g updates Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 01/12] net: phy: marvell10g: rename register Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 02/12] net: phy: marvell10g: fix typo Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 03/12] net: phy: marvell10g: allow 5gbase-r and usxgmii Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 04/12] net: phy: marvell10g: indicate 88X33X0 only port control registers Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 05/12] net: phy: marvell10g: add MACTYPE definitions for 88X33X0/88X33X0P Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 06/12] net: phy: marvell10g: add MACTYPE definitions for 88E21XX Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 07/12] net: phy: marvell10g: add code to determine number of ports Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 08/12] net: phy: marvell10g: support all rate matching modes Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 09/12] net: phy: marvell10g: support other MACTYPEs Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 10/12] net: phy: add constants for 2.5G and 5G speed in PCS speed register Marek Behún
2021-03-25 13:12 ` Marek Behún [this message]
2021-03-25 15:36   ` [PATCH net-next v2 11/12] net: phy: marvell10g: print exact model Marek Behún
2021-03-25 15:54   ` Russell King - ARM Linux admin
2021-03-25 16:56     ` Marek Behún
2021-03-25 20:29     ` Marek Behún
2021-03-25 20:44       ` Heiner Kallweit
2021-03-25 20:54         ` Marek Behún
2021-03-26  9:07           ` Russell King - ARM Linux admin
2021-03-26 11:11             ` Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 12/12] net: phy: marvell10g: better check for compatible interface Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210325131250.15901-12-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rmk+kernel@armlinux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.