* [PATCH v2 1/2] dt-bindings: arm: imx: add imx8mm gw7901 support @ 2021-03-19 20:50 Tim Harvey 2021-03-19 20:50 ` [PATCH v2 2/2] arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support Tim Harvey 2021-03-21 13:23 ` [PATCH v2 1/2] dt-bindings: arm: imx: add imx8mm gw7901 support Fabio Estevam 0 siblings, 2 replies; 5+ messages in thread From: Tim Harvey @ 2021-03-19 20:50 UTC (permalink / raw) To: devicetree, NXP Linux Team, Fabio Estevam, Pengutronix Kernel Team, Sascha Hauer, Rob Herring, Shawn Guo Cc: linux-kernel, Tim Harvey The Gateworks GW7901 is an ARM based single board computer (SBC) featuring: - i.MX8M Mini SoC - LPDDR4 DRAM - eMMC FLASH - SPI FRAM - Gateworks System Controller (GSC) - Atmel ATECC Crypto Authentication - USB 2.0 - Microchip GbE Switch - Multiple multi-protocol RS232/RS485/RS422 Serial ports - onboard 802.11ac WiFi / BT - microSD socket - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets - Wide range DC power input - 802.3at PoE Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- v2: - add Rob's Acked-by --- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 297c87f45db8..9af86ce3142d 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -684,6 +684,7 @@ properties: - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit + - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module - const: fsl,imx8mm -- 2.17.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support 2021-03-19 20:50 [PATCH v2 1/2] dt-bindings: arm: imx: add imx8mm gw7901 support Tim Harvey @ 2021-03-19 20:50 ` Tim Harvey 2021-03-21 13:22 ` Fabio Estevam 2021-03-29 1:22 ` Shawn Guo 2021-03-21 13:23 ` [PATCH v2 1/2] dt-bindings: arm: imx: add imx8mm gw7901 support Fabio Estevam 1 sibling, 2 replies; 5+ messages in thread From: Tim Harvey @ 2021-03-19 20:50 UTC (permalink / raw) To: devicetree, NXP Linux Team, Fabio Estevam, Pengutronix Kernel Team, Sascha Hauer, Rob Herring, Shawn Guo Cc: linux-kernel, Tim Harvey The Gateworks GW7901 is an ARM based single board computer (SBC) featuring: - i.MX8M Mini SoC - LPDDR4 DRAM - eMMC FLASH - SPI FRAM - Gateworks System Controller (GSC) - Atmel ATECC Crypto Authentication - USB 2.0 - Microchip GbE Switch - Multiple multi-protocol RS232/RS485/RS422 Serial ports - onboard 802.11ac WiFi / BT - microSD socket - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets - Wide range DC power input - 802.3at PoE Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- v2: - fixed issues reported by check_dtbs: - add missing GSC #address-cells and #size-cells - use common node name for SPI FLASH and drop mb85rs4mt compatible - add missing pinctrl-names to PMIC - add rohm,reset-snvs-powered to PMIC - add 32.768 kHz clock to PMIC Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mm-venice-gw7901.dts | 1016 +++++++++++++++++ 2 files changed, 1017 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 6438db3822f8..2a93323a7d3e 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts new file mode 100644 index 000000000000..d6431b01babc --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -0,0 +1,1016 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> + +#include "imx8mm.dtsi" + +/ { + model = "Gateworks Venice GW7901 i.MX8MM board"; + compatible = "gw,imx8mm-gw7901", "fsl,imx8mm"; + + aliases { + ethernet0 = &fec1; + ethernet1 = &lan1; + ethernet2 = &lan2; + ethernet3 = &lan3; + ethernet4 = &lan4; + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led01_red"; + gpios = <&leds_gpio 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led01_grn"; + gpios = <&leds_gpio 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led02_red"; + gpios = <&leds_gpio 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led02_grn"; + gpios = <&leds_gpio 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led03_red"; + gpios = <&leds_gpio 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-5 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led03_grn"; + gpios = <&leds_gpio 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-6 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led04_red"; + gpios = <&leds_gpio 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-7 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led04_grn"; + gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-8 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led05_red"; + gpios = <&leds_gpio 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-9 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led05_grn"; + gpios = <&leds_gpio 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-a { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led06_red"; + gpios = <&leds_gpio 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-b { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led06_grn"; + gpios = <&leds_gpio 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator-ioexp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_ioexp>; + compatible = "regulator-fixed"; + regulator-name = "ioexp"; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator-isouart { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_isouart>; + compatible = "regulator-fixed"; + regulator-name = "iso_uart"; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + startup-delay-us = <100>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb2_vbus: regulator-usb2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2>; + compatible = "regulator-fixed"; + regulator-name = "usb_usb2_vbus"; + gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_wifi: regulator-wifi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wl>; + compatible = "regulator-fixed"; + regulator-name = "wifi"; + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + status = "okay"; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vin_aux1"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vin_aux2"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_0p95"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_soc"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_arm"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p8"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_1p2"; + }; + + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_dram"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + /* vdd_soc: 0.805-0.900V (typ=0.8V) */ + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* vdd_arm: 0.805-1.0V (typ=0.9V) */ + BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_3p3 */ + BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_1p8 */ + BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_dram */ + BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + /* nvcc_snvs_1p8 */ + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_snvs_0p8 */ + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdda_1p8 */ + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + leds_gpio: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + switch: switch@5f { + compatible = "microchip,ksz9897"; + reg = <0x5f>; + pinctrl-0 = <&pinctrl_ksz>; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + phy-mode = "rgmii-id"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + lan1: port@0 { + reg = <0>; + label = "lan1"; + local-mac-address = [00 00 00 00 00 00]; + }; + lan2: port@1 { + reg = <1>; + label = "lan2"; + local-mac-address = [00 00 00 00 00 00]; + }; + lan3: port@2 { + reg = <2>; + label = "lan3"; + local-mac-address = [00 00 00 00 00 00]; + }; + lan4: port@3 { + reg = <3>; + label = "lan4"; + local-mac-address = [00 00 00 00 00 00]; + }; + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&fec1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + crypto@60 { + compatible = "atmel,atecc508a"; + reg = <0x60>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; + rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; + cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; + cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wifi>; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* DIG2_OUT */ + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* DIG2_IN */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* DIG1_IN */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIG1_OUT */ + MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x40000041 /* SIM2DET# */ + MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x40000041 /* SIM1DET# */ + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* SIM2SEL */ + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* IRQ# */ + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* RST# */ + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x159 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_ksz: kszgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x41 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x41 /* RST# */ + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 + >; + }; + + pinctrl_reg_isouart: regisouartgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 + >; + }; + + pinctrl_reg_ioexp: regioexpgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 + >; + }; + + pinctrl_reg_wl: regwlgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x40000041 + >; + }; + + pinctrl_reg_usb2: regusb1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x41 + MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x41 + >; + }; + + pinctrl_spi1: spi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x140 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x140 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x140 + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x140 + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x140 + >; + }; + + pinctrl_uart1_gpio: uart1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000041 /* RS422# */ + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000041 /* RS485# */ + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x40000041 /* RS232# */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x140 + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140 + >; + }; + + pinctrl_uart3_gpio: uart3gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000041 /* RS232# */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* RS422# */ + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000041 /* RS485# */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x140 + MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x140 + >; + }; + + pinctrl_uart4_gpio: uart4gpiogrp { + fsl,pins = < + + MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x40000041 /* RS232# */ + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40000041 /* RS422# */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* RS485# */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; + +&cpu_alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; +}; + +&cpu_crit0 { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support 2021-03-19 20:50 ` [PATCH v2 2/2] arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support Tim Harvey @ 2021-03-21 13:22 ` Fabio Estevam 2021-03-29 1:22 ` Shawn Guo 1 sibling, 0 replies; 5+ messages in thread From: Fabio Estevam @ 2021-03-21 13:22 UTC (permalink / raw) To: Tim Harvey Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, NXP Linux Team, Pengutronix Kernel Team, Sascha Hauer, Rob Herring, Shawn Guo, linux-kernel Hi Tim, On Fri, Mar 19, 2021 at 5:50 PM Tim Harvey <tharvey@gateworks.com> wrote: > > The Gateworks GW7901 is an ARM based single board computer (SBC) > featuring: > - i.MX8M Mini SoC > - LPDDR4 DRAM > - eMMC FLASH > - SPI FRAM > - Gateworks System Controller (GSC) > - Atmel ATECC Crypto Authentication > - USB 2.0 > - Microchip GbE Switch > - Multiple multi-protocol RS232/RS485/RS422 Serial ports > - onboard 802.11ac WiFi / BT > - microSD socket > - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets > - Wide range DC power input > - 802.3at PoE > > Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support 2021-03-19 20:50 ` [PATCH v2 2/2] arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support Tim Harvey 2021-03-21 13:22 ` Fabio Estevam @ 2021-03-29 1:22 ` Shawn Guo 1 sibling, 0 replies; 5+ messages in thread From: Shawn Guo @ 2021-03-29 1:22 UTC (permalink / raw) To: Tim Harvey Cc: devicetree, NXP Linux Team, Fabio Estevam, Pengutronix Kernel Team, Sascha Hauer, Rob Herring, linux-kernel On Fri, Mar 19, 2021 at 01:50:41PM -0700, Tim Harvey wrote: > The Gateworks GW7901 is an ARM based single board computer (SBC) > featuring: > - i.MX8M Mini SoC > - LPDDR4 DRAM > - eMMC FLASH > - SPI FRAM > - Gateworks System Controller (GSC) > - Atmel ATECC Crypto Authentication > - USB 2.0 > - Microchip GbE Switch > - Multiple multi-protocol RS232/RS485/RS422 Serial ports > - onboard 802.11ac WiFi / BT > - microSD socket > - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets > - Wide range DC power input > - 802.3at PoE > > Signed-off-by: Tim Harvey <tharvey@gateworks.com> > --- > v2: > - fixed issues reported by check_dtbs: > - add missing GSC #address-cells and #size-cells > - use common node name for SPI FLASH and drop mb85rs4mt compatible > - add missing pinctrl-names to PMIC > - add rohm,reset-snvs-powered to PMIC > - add 32.768 kHz clock to PMIC > > Signed-off-by: Tim Harvey <tharvey@gateworks.com> > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../dts/freescale/imx8mm-venice-gw7901.dts | 1016 +++++++++++++++++ > 2 files changed, 1017 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 6438db3822f8..2a93323a7d3e 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts > new file mode 100644 > index 000000000000..d6431b01babc > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts > @@ -0,0 +1,1016 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2020 Gateworks Corporation > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/linux-event-codes.h> > +#include <dt-bindings/leds/common.h> > + > +#include "imx8mm.dtsi" > + > +/ { > + model = "Gateworks Venice GW7901 i.MX8MM board"; > + compatible = "gw,imx8mm-gw7901", "fsl,imx8mm"; > + > + aliases { > + ethernet0 = &fec1; > + ethernet1 = &lan1; > + ethernet2 = &lan2; > + ethernet3 = &lan3; > + ethernet4 = &lan4; > + usb0 = &usbotg1; > + usb1 = &usbotg2; > + }; > + > + chosen { > + stdout-path = &uart2; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x0 0x40000000 0 0x80000000>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + user-pb { > + label = "user_pb"; > + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; > + linux,code = <BTN_0>; > + }; > + > + user-pb1x { > + label = "user_pb1x"; > + linux,code = <BTN_1>; > + interrupt-parent = <&gsc>; > + interrupts = <0>; > + }; > + > + key-erased { > + label = "key_erased"; > + linux,code = <BTN_2>; > + interrupt-parent = <&gsc>; > + interrupts = <1>; > + }; > + > + eeprom-wp { > + label = "eeprom_wp"; > + linux,code = <BTN_3>; > + interrupt-parent = <&gsc>; > + interrupts = <2>; > + }; > + > + tamper { > + label = "tamper"; > + linux,code = <BTN_4>; > + interrupt-parent = <&gsc>; > + interrupts = <5>; > + }; > + > + switch-hold { > + label = "switch_hold"; > + linux,code = <BTN_5>; > + interrupt-parent = <&gsc>; > + interrupts = <7>; > + }; > + }; > + > + led-controller { > + compatible = "gpio-leds"; > + > + led-0 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_RED>; > + label = "led01_red"; > + gpios = <&leds_gpio 0 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-1 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_GREEN>; > + label = "led01_grn"; > + gpios = <&leds_gpio 1 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-2 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_RED>; > + label = "led02_red"; > + gpios = <&leds_gpio 2 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-3 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_GREEN>; > + label = "led02_grn"; > + gpios = <&leds_gpio 3 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-4 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_RED>; > + label = "led03_red"; > + gpios = <&leds_gpio 4 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-5 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_GREEN>; > + label = "led03_grn"; > + gpios = <&leds_gpio 5 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-6 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_RED>; > + label = "led04_red"; > + gpios = <&leds_gpio 8 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-7 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_GREEN>; > + label = "led04_grn"; > + gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-8 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_RED>; > + label = "led05_red"; > + gpios = <&leds_gpio 10 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-9 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_GREEN>; > + label = "led05_grn"; > + gpios = <&leds_gpio 11 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-a { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_RED>; > + label = "led06_red"; > + gpios = <&leds_gpio 12 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-b { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_GREEN>; > + label = "led06_grn"; > + gpios = <&leds_gpio 13 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + }; > + > + reg_3p3v: regulator-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; always-on is meaningless to a regulator that doesn't have a on/off control. > + }; > + > + regulator-ioexp { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_ioexp>; > + compatible = "regulator-fixed"; > + regulator-name = "ioexp"; > + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; > + startup-delay-us = <100>; > + enable-active-high; Put it right after GPIO_ACTIVE_HIGH line. > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + regulator-isouart { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_isouart>; > + compatible = "regulator-fixed"; > + regulator-name = "iso_uart"; > + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; > + startup-delay-us = <100>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_usb2_vbus: regulator-usb2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_usb2>; > + compatible = "regulator-fixed"; > + regulator-name = "usb_usb2_vbus"; > + gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + reg_wifi: regulator-wifi { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_wl>; > + compatible = "regulator-fixed"; > + regulator-name = "wifi"; > + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; > + startup-delay-us = <100>; > + enable-active-high; Ditto > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > +}; > + > +&ddrc { > + operating-points-v2 = <&ddrc_opp_table>; > + > + ddrc_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-25M { > + opp-hz = /bits/ 64 <25000000>; > + }; > + > + opp-100M { > + opp-hz = /bits/ 64 <100000000>; > + }; > + > + opp-750M { > + opp-hz = /bits/ 64 <750000000>; > + }; > + }; > +}; > + > +&ecspi1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi1>; > + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; > + status = "okay"; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <40000000>; > + status = "okay"; > + }; > +}; > + > +&fec1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_fec1>; > + phy-mode = "rgmii-id"; > + local-mac-address = [00 00 00 00 00 00]; > + status = "okay"; > + > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + gsc: gsc@20 { > + compatible = "gw,gsc"; > + reg = <0x20>; > + pinctrl-0 = <&pinctrl_gsc>; > + interrupt-parent = <&gpio4>; > + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; > + interrupt-controller; > + #interrupt-cells = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + adc { > + compatible = "gw,gsc-adc"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + channel@6 { > + gw,mode = <0>; > + reg = <0x06>; > + label = "temp"; > + }; > + > + channel@8 { > + gw,mode = <1>; > + reg = <0x08>; > + label = "vdd_bat"; > + }; > + > + channel@82 { > + gw,mode = <2>; > + reg = <0x82>; > + label = "vin_aux1"; > + gw,voltage-divider-ohms = <22100 1000>; > + }; > + > + channel@84 { > + gw,mode = <2>; > + reg = <0x84>; > + label = "vin_aux2"; > + gw,voltage-divider-ohms = <22100 1000>; > + }; > + > + channel@86 { > + gw,mode = <2>; > + reg = <0x86>; > + label = "vdd_vin"; > + gw,voltage-divider-ohms = <22100 1000>; > + }; > + > + channel@88 { > + gw,mode = <2>; > + reg = <0x88>; > + label = "vdd_3p3"; > + gw,voltage-divider-ohms = <10000 10000>; > + }; > + > + channel@8c { > + gw,mode = <2>; > + reg = <0x8c>; > + label = "vdd_2p5"; > + gw,voltage-divider-ohms = <10000 10000>; > + }; > + > + channel@8e { > + gw,mode = <2>; > + reg = <0x8e>; > + label = "vdd_0p95"; > + }; > + > + channel@90 { > + gw,mode = <2>; > + reg = <0x90>; > + label = "vdd_soc"; > + }; > + > + channel@92 { > + gw,mode = <2>; > + reg = <0x92>; > + label = "vdd_arm"; > + }; > + > + channel@98 { > + gw,mode = <2>; > + reg = <0x98>; > + label = "vdd_1p8"; > + }; > + > + channel@9a { > + gw,mode = <2>; > + reg = <0x9a>; > + label = "vdd_1p2"; > + }; > + > + channel@9c { > + gw,mode = <2>; > + reg = <0x9c>; > + label = "vdd_dram"; > + }; > + > + channel@a2 { > + gw,mode = <2>; > + reg = <0xa2>; > + label = "vdd_gsc"; > + gw,voltage-divider-ohms = <10000 10000>; > + }; > + }; > + }; > + > + gpio: gpio@23 { > + compatible = "nxp,pca9555"; > + reg = <0x23>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-parent = <&gsc>; > + interrupts = <4>; > + }; > + > + eeprom@50 { > + compatible = "atmel,24c02"; > + reg = <0x50>; > + pagesize = <16>; > + }; > + > + eeprom@51 { > + compatible = "atmel,24c02"; > + reg = <0x51>; > + pagesize = <16>; > + }; > + > + eeprom@52 { > + compatible = "atmel,24c02"; > + reg = <0x52>; > + pagesize = <16>; > + }; > + > + eeprom@53 { > + compatible = "atmel,24c02"; > + reg = <0x53>; > + pagesize = <16>; > + }; > + > + rtc@68 { > + compatible = "dallas,ds1672"; > + reg = <0x68>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + pmic@4b { > + compatible = "rohm,bd71847"; > + reg = <0x4b>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pmic>; > + interrupt-parent = <&gpio3>; > + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; > + rohm,reset-snvs-powered; > + Unnecessary newline. > + #clock-cells = <0>; > + clocks = <&osc_32k 0>; > + clock-output-names = "clk-32k-out"; > + > + regulators { > + /* vdd_soc: 0.805-0.900V (typ=0.8V) */ > + BUCK1 { > + regulator-name = "buck1"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1300000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <1250>; > + }; > + > + /* vdd_arm: 0.805-1.0V (typ=0.9V) */ > + BUCK2 { > + regulator-name = "buck2"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1300000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <1250>; > + rohm,dvs-run-voltage = <1000000>; > + rohm,dvs-idle-voltage = <900000>; > + }; > + > + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ > + BUCK3 { > + regulator-name = "buck3"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1350000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vdd_3p3 */ > + BUCK4 { > + regulator-name = "buck4"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vdd_1p8 */ > + BUCK5 { > + regulator-name = "buck5"; > + regulator-min-microvolt = <1605000>; > + regulator-max-microvolt = <1995000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vdd_dram */ > + BUCK6 { > + regulator-name = "buck6"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* nvcc_snvs_1p8 */ > + LDO1 { > + regulator-name = "ldo1"; > + regulator-min-microvolt = <1600000>; > + regulator-max-microvolt = <1900000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vdd_snvs_0p8 */ > + LDO2 { > + regulator-name = "ldo2"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <900000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vdda_1p8 */ > + LDO3 { > + regulator-name = "ldo3"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + LDO4 { > + regulator-name = "ldo4"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + LDO6 { > + regulator-name = "ldo6"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + leds_gpio: gpio@20 { > + compatible = "nxp,pca9555"; > + reg = <0x20>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + switch: switch@5f { > + compatible = "microchip,ksz9897"; > + reg = <0x5f>; > + pinctrl-0 = <&pinctrl_ksz>; > + interrupt-parent = <&gpio4>; > + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; > + phy-mode = "rgmii-id"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; Have a newline between properties and child node. > + lan1: port@0 { > + reg = <0>; > + label = "lan1"; > + local-mac-address = [00 00 00 00 00 00]; > + }; Have a newline between nodes. Shawn > + lan2: port@1 { > + reg = <1>; > + label = "lan2"; > + local-mac-address = [00 00 00 00 00 00]; > + }; > + lan3: port@2 { > + reg = <2>; > + label = "lan3"; > + local-mac-address = [00 00 00 00 00 00]; > + }; > + lan4: port@3 { > + reg = <3>; > + label = "lan4"; > + local-mac-address = [00 00 00 00 00 00]; > + }; > + port@5 { > + reg = <5>; > + label = "cpu"; > + ethernet = <&fec1>; > + phy-mode = "rgmii-id"; > + > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + }; > + }; > + > + crypto@60 { > + compatible = "atmel,atecc508a"; > + reg = <0x60>; > + }; > +}; > + > +&i2c4 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c4>; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; > + rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; > + cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; > + dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; > + dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; > + dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +/* console */ > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > +}; > + > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; > + cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; > + rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; > + cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; > + rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&usbotg1 { > + dr_mode = "host"; > + disable-over-current; > + status = "okay"; > +}; > + > +&usbotg2 { > + dr_mode = "host"; > + vbus-supply = <®_usb2_vbus>; > + status = "okay"; > +}; > + > +/* SDIO WiFi */ > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + bus-width = <4>; > + non-removable; > + vmmc-supply = <®_wifi>; > + status = "okay"; > +}; > + > +/* microSD */ > +&usdhc2 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; > + bus-width = <4>; > + vmmc-supply = <®_3p3v>; > + status = "okay"; > +}; > + > +/* eMMC */ > +&usdhc3 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + bus-width = <8>; > + non-removable; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + pinctrl_hog: hoggrp { > + fsl,pins = < > + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* DIG2_OUT */ > + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* DIG2_IN */ > + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* DIG1_IN */ > + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIG1_OUT */ > + MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x40000041 /* SIM2DET# */ > + MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x40000041 /* SIM1DET# */ > + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* SIM2SEL */ > + >; > + }; > + > + pinctrl_fec1: fec1grp { > + fsl,pins = < > + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 > + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 > + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f > + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f > + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f > + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f > + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 > + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 > + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 > + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 > + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f > + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 > + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 > + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f > + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* IRQ# */ > + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* RST# */ > + >; > + }; > + > + pinctrl_gsc: gscgrp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x159 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 > + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 > + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 > + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_i2c4: i2c4grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 > + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_ksz: kszgrp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x41 > + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x41 /* RST# */ > + >; > + }; > + > + pinctrl_pmic: pmicgrp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 > + >; > + }; > + > + pinctrl_reg_isouart: regisouartgrp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 > + >; > + }; > + > + pinctrl_reg_ioexp: regioexpgrp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 > + >; > + }; > + > + pinctrl_reg_wl: regwlgrp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x40000041 > + >; > + }; > + > + pinctrl_reg_usb2: regusb1grp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x41 > + MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x41 > + >; > + }; > + > + pinctrl_spi1: spi1grp { > + fsl,pins = < > + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 > + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 > + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 > + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 > + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 > + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x140 > + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x140 > + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x140 > + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x140 > + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x140 > + >; > + }; > + > + pinctrl_uart1_gpio: uart1gpiogrp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000041 /* RS422# */ > + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000041 /* RS485# */ > + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x40000041 /* RS232# */ > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 > + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 > + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 > + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x140 > + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140 > + >; > + }; > + > + pinctrl_uart3_gpio: uart3gpiogrp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000041 /* RS232# */ > + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* RS422# */ > + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000041 /* RS485# */ > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 > + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 > + MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x140 > + MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x140 > + >; > + }; > + > + pinctrl_uart4_gpio: uart4gpiogrp { > + fsl,pins = < > + > + MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x40000041 /* RS232# */ > + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40000041 /* RS422# */ > + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* RS485# */ > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 > + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 > + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 > + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 > + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 > + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 > + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 > + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 > + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 > + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 > + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 > + >; > + }; > + > + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 > + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 > + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 > + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 > + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 > + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 > + >; > + }; > + > + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 > + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 > + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 > + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 > + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 > + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 > + >; > + }; > + > + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 > + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 > + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 > + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 > + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 > + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 > + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 > + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 > + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 > + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 > + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 > + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 > + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 > + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 > + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 > + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 > + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 > + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 > + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 > + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 > + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 > + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 > + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 > + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 > + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 > + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 > + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 > + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 > + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 > + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 > + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 > + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 > + >; > + }; > +}; > + > +&cpu_alert0 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > +}; > + > +&cpu_crit0 { > + temperature = <105000>; > + hysteresis = <2000>; > + type = "critical"; > +}; > -- > 2.17.1 > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm: imx: add imx8mm gw7901 support 2021-03-19 20:50 [PATCH v2 1/2] dt-bindings: arm: imx: add imx8mm gw7901 support Tim Harvey 2021-03-19 20:50 ` [PATCH v2 2/2] arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support Tim Harvey @ 2021-03-21 13:23 ` Fabio Estevam 1 sibling, 0 replies; 5+ messages in thread From: Fabio Estevam @ 2021-03-21 13:23 UTC (permalink / raw) To: Tim Harvey Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, NXP Linux Team, Pengutronix Kernel Team, Sascha Hauer, Rob Herring, Shawn Guo, linux-kernel On Fri, Mar 19, 2021 at 5:50 PM Tim Harvey <tharvey@gateworks.com> wrote: > > The Gateworks GW7901 is an ARM based single board computer (SBC) > featuring: > - i.MX8M Mini SoC > - LPDDR4 DRAM > - eMMC FLASH > - SPI FRAM > - Gateworks System Controller (GSC) > - Atmel ATECC Crypto Authentication > - USB 2.0 > - Microchip GbE Switch > - Multiple multi-protocol RS232/RS485/RS422 Serial ports > - onboard 802.11ac WiFi / BT > - microSD socket > - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets > - Wide range DC power input > - 802.3at PoE > > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-03-29 1:23 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-03-19 20:50 [PATCH v2 1/2] dt-bindings: arm: imx: add imx8mm gw7901 support Tim Harvey 2021-03-19 20:50 ` [PATCH v2 2/2] arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support Tim Harvey 2021-03-21 13:22 ` Fabio Estevam 2021-03-29 1:22 ` Shawn Guo 2021-03-21 13:23 ` [PATCH v2 1/2] dt-bindings: arm: imx: add imx8mm gw7901 support Fabio Estevam
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.