[PATCH 1/3] dt-bindings: mmc: iproc-sdhci: Convert to json-schema

[Nicolas Saenz Julienne <nsaenz@kernel.org>]

Convert the brcm,iproc-sdhci binding to DT schema format using json-schema

Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

---

 .../bindings/mmc/brcm,iproc-sdhci.yaml        | 63 +++++++++++++++++++
 .../bindings/mmc/brcm,sdhci-iproc.txt         | 37 -----------
 2 files changed, 63 insertions(+), 37 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
 delete mode 100644 Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt

diff --git a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
new file mode 100644
index 000000000000..6f569fbfa134
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,iproc-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom IPROC SDHCI controller
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-sdhci
+      - brcm,bcm2711-emmc2
+      - brcm,sdhci-iproc-cygnus
+      - brcm,sdhci-iproc
+
+  reg:
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Handle to core clock for the sdhci controller.
+
+  sdhci,auto-cmd12:
+    type: boolean
+    description: Specifies that controller should use auto CMD12
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/bcm-cygnus.h>
+
+    mmc@18041000 {
+      compatible = "brcm,sdhci-iproc-cygnus";
+      reg = <0x18041000 0x100>;
+      interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+      bus-width = <4>;
+      sdhci,auto-cmd12;
+      no-1-8-v;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
deleted file mode 100644
index 09d87cc1182a..000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Broadcom IPROC SDHCI controller
-
-This file documents differences between the core properties described
-by mmc.txt and the properties that represent the IPROC SDHCI controller.
-
-Required properties:
-- compatible : Should be one of the following
-	       "brcm,bcm2835-sdhci"
-	       "brcm,bcm2711-emmc2"
-	       "brcm,sdhci-iproc-cygnus"
-	       "brcm,sdhci-iproc"
-
-Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and
-bcm2711-emmc2 for the additional eMMC2 controller on BCM2711.
-
-Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
-restricted to 32bit host accesses to SDHCI registers.
-
-Use sdhci-iproc for Broadcom SDHCI Controllers that allow standard
-8, 16, 32-bit host access to SDHCI register.
-
-- clocks : The clock feeding the SDHCI controller.
-
-Optional properties:
-  - sdhci,auto-cmd12: specifies that controller should use auto CMD12.
-
-Example:
-
-sdhci0: sdhci@18041000 {
-	compatible = "brcm,sdhci-iproc-cygnus";
-	reg = <0x18041000 0x100>;
-	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
-	bus-width = <4>;
-	sdhci,auto-cmd12;
-	no-1-8-v;
-};
-- 
2.30.2