From: Shawn Guo <shawnguo@kernel.org>
To: Marek Vasut <marex@denx.de>
Cc: linux-arm-kernel@lists.infradead.org, arnd@arndb.de,
Fabio Estevam <festevam@gmail.com>,
Christoph Niedermaier <cniedermaier@dh-electronics.com>,
Ludwig Zenz <lzenz@dh-electronics.com>,
NXP Linux Team <linux-imx@nxp.com>,
stable@vger.kernel.org
Subject: Re: [PATCH V3] ARM: dts: imx6q-dhcom: Add PU, VDD1P1, VDD2P5 regulators
Date: Thu, 13 May 2021 15:54:41 +0800 [thread overview]
Message-ID: <20210513075440.GW3425@dragon> (raw)
In-Reply-To: <20210426102321.5039-1-marex@denx.de>
On Mon, Apr 26, 2021 at 12:23:21PM +0200, Marek Vasut wrote:
> Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
> via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
> from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.
>
> While no instability or problems are currently observed, the regulators
> should be fully described in DT and that description should fully match
> the hardware, else this might lead to unforseen issues later. Fix this.
>
> Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Ludwig Zenz <lzenz@dh-electronics.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: stable@vger.kernel.org
Applied, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Marek Vasut <marex@denx.de>
Cc: linux-arm-kernel@lists.infradead.org, arnd@arndb.de,
Fabio Estevam <festevam@gmail.com>,
Christoph Niedermaier <cniedermaier@dh-electronics.com>,
Ludwig Zenz <lzenz@dh-electronics.com>,
NXP Linux Team <linux-imx@nxp.com>,
stable@vger.kernel.org
Subject: Re: [PATCH V3] ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
Date: Thu, 13 May 2021 15:54:41 +0800 [thread overview]
Message-ID: <20210513075440.GW3425@dragon> (raw)
In-Reply-To: <20210426102321.5039-1-marex@denx.de>
On Mon, Apr 26, 2021 at 12:23:21PM +0200, Marek Vasut wrote:
> Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
> via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
> from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.
>
> While no instability or problems are currently observed, the regulators
> should be fully described in DT and that description should fully match
> the hardware, else this might lead to unforseen issues later. Fix this.
>
> Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Ludwig Zenz <lzenz@dh-electronics.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: stable@vger.kernel.org
Applied, thanks.
next prev parent reply other threads:[~2021-05-13 7:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-26 10:23 [PATCH V3] ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators Marek Vasut
2021-04-26 10:23 ` Marek Vasut
2021-04-27 14:46 ` [PATCH V3] ARM: dts: imx6q-dhcom: Add PU, VDD1P1, VDD2P5 regulators Christoph Niedermaier
2021-04-27 14:46 ` [PATCH V3] ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators Christoph Niedermaier
2021-05-13 7:54 ` Shawn Guo [this message]
2021-05-13 7:54 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210513075440.GW3425@dragon \
--to=shawnguo@kernel.org \
--cc=arnd@arndb.de \
--cc=cniedermaier@dh-electronics.com \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=lzenz@dh-electronics.com \
--cc=marex@denx.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.