From: Rob Herring <robh@kernel.org>
To: Marek Vasut <marex@denx.de>
Cc: dri-devel@lists.freedesktop.org, ch@denx.de,
Alexandre Torgue <alexandre.torgue@st.com>,
Andrzej Hajda <a.hajda@samsung.com>,
Antonio Borneo <antonio.borneo@st.com>,
Benjamin Gaignard <benjamin.gaignard@st.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Philippe Cornu <philippe.cornu@st.com>,
Sam Ravnborg <sam@ravnborg.org>,
Vincent Abriou <vincent.abriou@st.com>,
Yannick Fertre <yannick.fertre@st.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [PATCH V4 1/2] dt-bindings: display: bridge: lvds-codec: Document pixel data sampling edge select
Date: Tue, 18 May 2021 08:21:19 -0500 [thread overview]
Message-ID: <20210518132119.GA492897@robh.at.kernel.org> (raw)
In-Reply-To: <20210515204317.366967-1-marex@denx.de>
On Sat, May 15, 2021 at 10:43:15PM +0200, Marek Vasut wrote:
> The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to
> select input pixel data sampling edge. Add DT property "pclk-sample", not
> the same as the one used by display timings but rather the same as used by
> media, to define the pixel data sampling edge.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Alexandre Torgue <alexandre.torgue@st.com>
> Cc: Andrzej Hajda <a.hajda@samsung.com>
> Cc: Antonio Borneo <antonio.borneo@st.com>
> Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
> Cc: Biju Das <biju.das.jz@bp.renesas.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: Philippe Cornu <philippe.cornu@st.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Vincent Abriou <vincent.abriou@st.com>
> Cc: Yannick Fertre <yannick.fertre@st.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> To: dri-devel@lists.freedesktop.org
> ---
> V4: New patch split from combined V3
> ---
> .../bindings/display/bridge/lvds-codec.yaml | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> index 304a1367faaa..f4dd16bd69d2 100644
> --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> @@ -64,6 +64,14 @@ properties:
> - port@0
> - port@1
>
> + pclk-sample:
> + description:
> + Data sampling on rising or falling edge.
> + enum:
> + - 0 # Falling edge
> + - 1 # Rising edge
> + default: 0
This is already defined in video-interfaces.yaml, why are you redefining
it here?
It's also defined to be an endpoint property, so move it there and
reference video-interfaces.yaml.
> +
> powerdown-gpios:
> description:
> The GPIO used to control the power down line of this device.
> @@ -71,6 +79,16 @@ properties:
>
> power-supply: true
>
> +if:
> + not:
> + properties:
> + compatible:
> + contains:
> + const: lvds-encoder
> +then:
> + properties:
> + pclk-sample: false
This constraint would be difficult to express with the property in an
endpoint. I'd just drop it.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Marek Vasut <marex@denx.de>
Cc: dri-devel@lists.freedesktop.org, ch@denx.de,
Alexandre Torgue <alexandre.torgue@st.com>,
Andrzej Hajda <a.hajda@samsung.com>,
Antonio Borneo <antonio.borneo@st.com>,
Benjamin Gaignard <benjamin.gaignard@st.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Philippe Cornu <philippe.cornu@st.com>,
Sam Ravnborg <sam@ravnborg.org>,
Vincent Abriou <vincent.abriou@st.com>,
Yannick Fertre <yannick.fertre@st.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [PATCH V4 1/2] dt-bindings: display: bridge: lvds-codec: Document pixel data sampling edge select
Date: Tue, 18 May 2021 08:21:19 -0500 [thread overview]
Message-ID: <20210518132119.GA492897@robh.at.kernel.org> (raw)
In-Reply-To: <20210515204317.366967-1-marex@denx.de>
On Sat, May 15, 2021 at 10:43:15PM +0200, Marek Vasut wrote:
> The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to
> select input pixel data sampling edge. Add DT property "pclk-sample", not
> the same as the one used by display timings but rather the same as used by
> media, to define the pixel data sampling edge.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Alexandre Torgue <alexandre.torgue@st.com>
> Cc: Andrzej Hajda <a.hajda@samsung.com>
> Cc: Antonio Borneo <antonio.borneo@st.com>
> Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
> Cc: Biju Das <biju.das.jz@bp.renesas.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: Philippe Cornu <philippe.cornu@st.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Vincent Abriou <vincent.abriou@st.com>
> Cc: Yannick Fertre <yannick.fertre@st.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> To: dri-devel@lists.freedesktop.org
> ---
> V4: New patch split from combined V3
> ---
> .../bindings/display/bridge/lvds-codec.yaml | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> index 304a1367faaa..f4dd16bd69d2 100644
> --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> @@ -64,6 +64,14 @@ properties:
> - port@0
> - port@1
>
> + pclk-sample:
> + description:
> + Data sampling on rising or falling edge.
> + enum:
> + - 0 # Falling edge
> + - 1 # Rising edge
> + default: 0
This is already defined in video-interfaces.yaml, why are you redefining
it here?
It's also defined to be an endpoint property, so move it there and
reference video-interfaces.yaml.
> +
> powerdown-gpios:
> description:
> The GPIO used to control the power down line of this device.
> @@ -71,6 +79,16 @@ properties:
>
> power-supply: true
>
> +if:
> + not:
> + properties:
> + compatible:
> + contains:
> + const: lvds-encoder
> +then:
> + properties:
> + pclk-sample: false
This constraint would be difficult to express with the property in an
endpoint. I'd just drop it.
Rob
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Marek Vasut <marex@denx.de>
Cc: devicetree@vger.kernel.org,
Benjamin Gaignard <benjamin.gaignard@st.com>,
Antonio Borneo <antonio.borneo@st.com>,
Vincent Abriou <vincent.abriou@st.com>,
Philippe Cornu <philippe.cornu@st.com>,
dri-devel@lists.freedesktop.org,
Yannick Fertre <yannick.fertre@st.com>,
Andrzej Hajda <a.hajda@samsung.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Sam Ravnborg <sam@ravnborg.org>,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, ch@denx.de
Subject: Re: [PATCH V4 1/2] dt-bindings: display: bridge: lvds-codec: Document pixel data sampling edge select
Date: Tue, 18 May 2021 08:21:19 -0500 [thread overview]
Message-ID: <20210518132119.GA492897@robh.at.kernel.org> (raw)
In-Reply-To: <20210515204317.366967-1-marex@denx.de>
On Sat, May 15, 2021 at 10:43:15PM +0200, Marek Vasut wrote:
> The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to
> select input pixel data sampling edge. Add DT property "pclk-sample", not
> the same as the one used by display timings but rather the same as used by
> media, to define the pixel data sampling edge.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Alexandre Torgue <alexandre.torgue@st.com>
> Cc: Andrzej Hajda <a.hajda@samsung.com>
> Cc: Antonio Borneo <antonio.borneo@st.com>
> Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
> Cc: Biju Das <biju.das.jz@bp.renesas.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: Philippe Cornu <philippe.cornu@st.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Vincent Abriou <vincent.abriou@st.com>
> Cc: Yannick Fertre <yannick.fertre@st.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> To: dri-devel@lists.freedesktop.org
> ---
> V4: New patch split from combined V3
> ---
> .../bindings/display/bridge/lvds-codec.yaml | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> index 304a1367faaa..f4dd16bd69d2 100644
> --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> @@ -64,6 +64,14 @@ properties:
> - port@0
> - port@1
>
> + pclk-sample:
> + description:
> + Data sampling on rising or falling edge.
> + enum:
> + - 0 # Falling edge
> + - 1 # Rising edge
> + default: 0
This is already defined in video-interfaces.yaml, why are you redefining
it here?
It's also defined to be an endpoint property, so move it there and
reference video-interfaces.yaml.
> +
> powerdown-gpios:
> description:
> The GPIO used to control the power down line of this device.
> @@ -71,6 +79,16 @@ properties:
>
> power-supply: true
>
> +if:
> + not:
> + properties:
> + compatible:
> + contains:
> + const: lvds-encoder
> +then:
> + properties:
> + pclk-sample: false
This constraint would be difficult to express with the property in an
endpoint. I'd just drop it.
Rob
next prev parent reply other threads:[~2021-05-18 13:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-15 20:43 [PATCH V4 1/2] dt-bindings: display: bridge: lvds-codec: Document pixel data sampling edge select Marek Vasut
2021-05-15 20:43 ` Marek Vasut
2021-05-15 20:43 ` Marek Vasut
2021-05-15 20:43 ` [PATCH V4 2/2] drm/bridge: lvds-codec: Add support for " Marek Vasut
2021-05-15 20:43 ` Marek Vasut
2021-05-18 13:21 ` Rob Herring [this message]
2021-05-18 13:21 ` [PATCH V4 1/2] dt-bindings: display: bridge: lvds-codec: Document " Rob Herring
2021-05-18 13:21 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210518132119.GA492897@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=a.hajda@samsung.com \
--cc=alexandre.torgue@st.com \
--cc=antonio.borneo@st.com \
--cc=benjamin.gaignard@st.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=ch@denx.de \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=marex@denx.de \
--cc=mcoquelin.stm32@gmail.com \
--cc=philippe.cornu@st.com \
--cc=sam@ravnborg.org \
--cc=vincent.abriou@st.com \
--cc=yannick.fertre@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.