From: Jamin Lin <jamin_lin@aspeedtech.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH 2/3] ARM: dts: aspeed: Add node for AST2600 I2C
Date: Wed, 19 May 2021 16:04:28 +0800 [thread overview]
Message-ID: <20210519080436.18975-3-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20210519080436.18975-1-jamin_lin@aspeedtech.com>
Add node to get the global register of i2c for AST2600.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index f96607b7b4e2..998d55a16c5c 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -674,6 +674,14 @@
#include "aspeed-g6-pinctrl.dtsi"
&i2c {
+
+ i2c_gr: i2c-global-regs at 0 {
+ compatible = "aspeed,ast2600-i2c-global", "syscon";
+ reg = <0x0 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ };
+
i2c0: i2c-bus at 80 {
#address-cells = <1>;
#size-cells = <0>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jamin Lin <jamin_lin@aspeedtech.com>
To: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
"Andrew Jeffery" <andrew@aj.id.au>,
Brendan Higgins <brendanhiggins@google.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Rayn Chen <rayn_chen@aspeedtech.com>,
"open list:I2C SUBSYSTEM HOST DRIVERS"
<linux-i2c@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-arm-kernel@lists.infradead.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-aspeed@lists.ozlabs.org>,
open list <linux-kernel@vger.kernel.org>,
"moderated list:ARM/ASPEED I2C DRIVER" <openbmc@lists.ozlabs.org>
Cc: <ryan_chen@aspeedtech.com>, <chiawei_wang@aspeedtech.com>,
<troy_lee@aspeedtech.com>, <steven_lee@aspeedtech.com>,
<jamin_lin@aspeedtech.com>
Subject: [PATCH 2/3] ARM: dts: aspeed: Add node for AST2600 I2C
Date: Wed, 19 May 2021 16:04:28 +0800 [thread overview]
Message-ID: <20210519080436.18975-3-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20210519080436.18975-1-jamin_lin@aspeedtech.com>
Add node to get the global register of i2c for AST2600.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index f96607b7b4e2..998d55a16c5c 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -674,6 +674,14 @@
#include "aspeed-g6-pinctrl.dtsi"
&i2c {
+
+ i2c_gr: i2c-global-regs@0 {
+ compatible = "aspeed,ast2600-i2c-global", "syscon";
+ reg = <0x0 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ };
+
i2c0: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jamin Lin <jamin_lin@aspeedtech.com>
To: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
"Andrew Jeffery" <andrew@aj.id.au>,
Brendan Higgins <brendanhiggins@google.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Rayn Chen <rayn_chen@aspeedtech.com>,
"open list:I2C SUBSYSTEM HOST DRIVERS"
<linux-i2c@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-arm-kernel@lists.infradead.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-aspeed@lists.ozlabs.org>,
open list <linux-kernel@vger.kernel.org>,
"moderated list:ARM/ASPEED I2C DRIVER" <openbmc@lists.ozlabs.org>
Cc: steven_lee@aspeedtech.com, chiawei_wang@aspeedtech.com,
troy_lee@aspeedtech.com, ryan_chen@aspeedtech.com,
jamin_lin@aspeedtech.com
Subject: [PATCH 2/3] ARM: dts: aspeed: Add node for AST2600 I2C
Date: Wed, 19 May 2021 16:04:28 +0800 [thread overview]
Message-ID: <20210519080436.18975-3-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20210519080436.18975-1-jamin_lin@aspeedtech.com>
Add node to get the global register of i2c for AST2600.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index f96607b7b4e2..998d55a16c5c 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -674,6 +674,14 @@
#include "aspeed-g6-pinctrl.dtsi"
&i2c {
+
+ i2c_gr: i2c-global-regs@0 {
+ compatible = "aspeed,ast2600-i2c-global", "syscon";
+ reg = <0x0 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ };
+
i2c0: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jamin Lin <jamin_lin@aspeedtech.com>
To: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
"Andrew Jeffery" <andrew@aj.id.au>,
Brendan Higgins <brendanhiggins@google.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Rayn Chen <rayn_chen@aspeedtech.com>,
"open list:I2C SUBSYSTEM HOST DRIVERS"
<linux-i2c@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-arm-kernel@lists.infradead.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-aspeed@lists.ozlabs.org>,
open list <linux-kernel@vger.kernel.org>,
"moderated list:ARM/ASPEED I2C DRIVER" <openbmc@lists.ozlabs.org>
Cc: <ryan_chen@aspeedtech.com>, <chiawei_wang@aspeedtech.com>,
<troy_lee@aspeedtech.com>, <steven_lee@aspeedtech.com>,
<jamin_lin@aspeedtech.com>
Subject: [PATCH 2/3] ARM: dts: aspeed: Add node for AST2600 I2C
Date: Wed, 19 May 2021 16:04:28 +0800 [thread overview]
Message-ID: <20210519080436.18975-3-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20210519080436.18975-1-jamin_lin@aspeedtech.com>
Add node to get the global register of i2c for AST2600.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index f96607b7b4e2..998d55a16c5c 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -674,6 +674,14 @@
#include "aspeed-g6-pinctrl.dtsi"
&i2c {
+
+ i2c_gr: i2c-global-regs@0 {
+ compatible = "aspeed,ast2600-i2c-global", "syscon";
+ reg = <0x0 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ };
+
i2c0: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-05-19 8:04 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 8:04 [PATCH 0/3] i2c: aspeed: avoid new registers definition of AST2600 Jamin Lin
2021-05-19 8:04 ` Jamin Lin
2021-05-19 8:04 ` Jamin Lin
2021-05-19 8:04 ` Jamin Lin
2021-05-19 8:04 ` [PATCH 1/3] " Jamin Lin
2021-05-19 8:04 ` Jamin Lin
2021-05-19 8:04 ` Jamin Lin
2021-05-19 8:04 ` Jamin Lin
2021-05-19 19:02 ` Zev Weiss
2021-05-19 19:02 ` Zev Weiss
2021-05-19 19:02 ` Zev Weiss
2021-05-19 19:02 ` Zev Weiss
2021-05-24 2:08 ` Jamin Lin
2021-05-24 2:08 ` Jamin Lin
2021-05-24 2:08 ` Jamin Lin
2021-05-24 2:08 ` Jamin Lin
2021-05-24 21:16 ` Zev Weiss
2021-05-24 21:16 ` Zev Weiss
2021-05-24 21:16 ` Zev Weiss
2021-05-24 21:16 ` Zev Weiss
2021-05-25 2:08 ` Jamin Lin
2021-05-25 2:08 ` Jamin Lin
2021-05-25 2:08 ` Jamin Lin
2021-05-25 2:08 ` Jamin Lin
2021-05-19 22:59 ` Joel Stanley
2021-05-19 22:59 ` Joel Stanley
2021-05-19 22:59 ` Joel Stanley
2021-05-19 22:59 ` Joel Stanley
2021-05-20 3:31 ` Jamin Lin
2021-05-20 3:31 ` Jamin Lin
2021-05-20 3:31 ` Jamin Lin
2021-05-20 3:31 ` Jamin Lin
2021-05-21 2:00 ` Tao Ren
2021-05-21 2:00 ` Tao Ren
2021-05-21 2:00 ` Tao Ren
2021-05-21 2:00 ` Tao Ren
2021-05-24 1:53 ` Jamin Lin
2021-05-24 1:53 ` Jamin Lin
2021-05-24 1:53 ` Jamin Lin
2021-05-24 1:53 ` Jamin Lin
2021-05-24 2:34 ` Joel Stanley
2021-05-24 2:34 ` Joel Stanley
2021-05-24 2:34 ` Joel Stanley
2021-05-24 2:34 ` Joel Stanley
2021-05-25 2:04 ` Jamin Lin
2021-05-25 2:04 ` Jamin Lin
2021-05-25 2:04 ` Jamin Lin
2021-05-25 2:04 ` Jamin Lin
2021-05-19 8:04 ` Jamin Lin [this message]
2021-05-19 8:04 ` [PATCH 2/3] ARM: dts: aspeed: Add node for AST2600 I2C Jamin Lin
2021-05-19 8:04 ` Jamin Lin
2021-05-19 8:04 ` Jamin Lin
2021-05-19 8:04 ` [PATCH 3/3] dt-bindings: aspeed-i2c: Convert txt to yaml format Jamin Lin
2021-05-19 8:04 ` Jamin Lin
2021-05-19 8:04 ` Jamin Lin
2021-05-19 8:04 ` Jamin Lin
2021-05-19 15:29 ` Rob Herring
2021-05-19 15:29 ` Rob Herring
2021-05-19 15:29 ` Rob Herring
2021-05-19 15:29 ` Rob Herring
2021-05-20 3:16 ` Jamin Lin
2021-05-20 3:16 ` Jamin Lin
2021-05-20 3:16 ` Jamin Lin
2021-05-20 3:16 ` Jamin Lin
2021-05-19 18:28 ` Rob Herring
2021-05-19 18:28 ` Rob Herring
2021-05-19 18:28 ` Rob Herring
2021-05-19 18:28 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210519080436.18975-3-jamin_lin@aspeedtech.com \
--to=jamin_lin@aspeedtech.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.