Re: [PATCH v7 1/4] mfd: rt4831: Adds support for Richtek RT4831

[Lee Jones <lee.jones@linaro.org>]

On Mon, 17 May 2021, cy_huang wrote:

> From: ChiYuan Huang <cy_huang@richtek.com>
> 
> This adds support Richtek RT4831 core. It includes four channel WLED driver
> and Display Bias Voltage outputs.
> 
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> ---
> - Send the patch series for the wrong mail subject.
> 
> The RT4831 regulator patches are already on main stream, and can be referred to
> 9351ab8b0cb6 regulator: rt4831: Adds support for Richtek RT4831 DSV regulator
> 934b05e81862 regulator: rt4831: Adds DT binding document for Richtek RT4831 DSV regulator
> 
> since v6
> - Respin the date from 2020 to 2021.
> - Rmove the shutdown routine.
> - Change the macro OF_MFD_CELL to MFD_CELL_OF.
> 
> since v5
> - Rename file name from rt4831-core.c to rt4831.c
> - Change RICHTEK_VID to RICHTEK_VENDOR_ID.
> - Change gpio_desc nameing from 'enable' to 'enable_gpio' in probe.
> - Change variable 'val' to the meaningful name 'chip_id'.
> - Refine the error log when vendor id is not matched.
> - Remove of_match_ptr.
> 
> since v2
> - Refine Kconfig descriptions.
> - Add copyright.
> - Refine error logs in probe.
> - Refine comment lines in remove and shutdown.
> ---
>  drivers/mfd/Kconfig  |  10 +++++
>  drivers/mfd/Makefile |   1 +
>  drivers/mfd/rt4831.c | 115 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 126 insertions(+)
>  create mode 100644 drivers/mfd/rt4831.c

Applied, thanks.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog