[PATCH 5.10 100/252] {net, vdpa}/mlx5: Configure interface MAC into mpfs L2 table

[PATCH 5.10 100/252] {net, vdpa}/mlx5: Configure interface MAC into mpfs L2 table

[Greg Kroah-Hartman]

From: Eli Cohen <elic@nvidia.com>

commit 7c9f131f366ab414691907fa0407124ea2b2f3bc upstream.

net/mlx5: Expose MPFS configuration API

MPFS is the multi physical function switch that bridges traffic between
the physical port and any physical functions associated with it. The
driver is required to add or remove MAC entries to properly forward
incoming traffic to the correct physical function.

We export the API to control MPFS so that other drivers, such as
mlx5_vdpa are able to add MAC addresses of their network interfaces.

The MAC address of the vdpa interface must be configured into the MPFS L2
address. Failing to do so could cause, in some NIC configurations, failure
to forward packets to the vdpa network device instance.

Fix this by adding calls to update the MPFS table.

CC: <mst@redhat.com>
CC: <jasowang@redhat.com>
CC: <virtualization@lists.linux-foundation.org>
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_fs.c    |    1 +
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c  |    1 +
 drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c |    3 +++
 drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.h |    5 +----
 drivers/vdpa/mlx5/net/mlx5_vnet.c                  |   19 ++++++++++++++++++-
 include/linux/mlx5/mpfs.h                          |   18 ++++++++++++++++++
 6 files changed, 42 insertions(+), 5 deletions(-)
 create mode 100644 include/linux/mlx5/mpfs.h

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
@@ -35,6 +35,7 @@
 #include <linux/ipv6.h>
 #include <linux/tcp.h>
 #include <linux/mlx5/fs.h>
+#include <linux/mlx5/mpfs.h>
 #include "en.h"
 #include "lib/mpfs.h"
 
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -35,6 +35,7 @@
 #include <linux/mlx5/mlx5_ifc.h>
 #include <linux/mlx5/vport.h>
 #include <linux/mlx5/fs.h>
+#include <linux/mlx5/mpfs.h>
 #include "esw/acl/lgcy.h"
 #include "mlx5_core.h"
 #include "lib/eq.h"
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
@@ -33,6 +33,7 @@
 #include <linux/etherdevice.h>
 #include <linux/mlx5/driver.h>
 #include <linux/mlx5/mlx5_ifc.h>
+#include <linux/mlx5/mpfs.h>
 #include <linux/mlx5/eswitch.h>
 #include "mlx5_core.h"
 #include "lib/mpfs.h"
@@ -175,6 +176,7 @@ out:
 	mutex_unlock(&mpfs->lock);
 	return err;
 }
+EXPORT_SYMBOL(mlx5_mpfs_add_mac);
 
 int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac)
 {
@@ -206,3 +208,4 @@ unlock:
 	mutex_unlock(&mpfs->lock);
 	return err;
 }
+EXPORT_SYMBOL(mlx5_mpfs_del_mac);
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.h
@@ -84,12 +84,9 @@ struct l2addr_node {
 #ifdef CONFIG_MLX5_MPFS
 int  mlx5_mpfs_init(struct mlx5_core_dev *dev);
 void mlx5_mpfs_cleanup(struct mlx5_core_dev *dev);
-int  mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac);
-int  mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac);
 #else /* #ifndef CONFIG_MLX5_MPFS */
 static inline int  mlx5_mpfs_init(struct mlx5_core_dev *dev) { return 0; }
 static inline void mlx5_mpfs_cleanup(struct mlx5_core_dev *dev) {}
-static inline int  mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac) { return 0; }
-static inline int  mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac) { return 0; }
 #endif
+
 #endif
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -9,6 +9,7 @@
 #include <linux/mlx5/vport.h>
 #include <linux/mlx5/fs.h>
 #include <linux/mlx5/device.h>
+#include <linux/mlx5/mpfs.h>
 #include "mlx5_vnet.h"
 #include "mlx5_vdpa_ifc.h"
 #include "mlx5_vdpa.h"
@@ -1839,11 +1840,16 @@ static int mlx5_vdpa_set_map(struct vdpa
 static void mlx5_vdpa_free(struct vdpa_device *vdev)
 {
 	struct mlx5_vdpa_dev *mvdev = to_mvdev(vdev);
+	struct mlx5_core_dev *pfmdev;
 	struct mlx5_vdpa_net *ndev;
 
 	ndev = to_mlx5_vdpa_ndev(mvdev);
 
 	free_resources(ndev);
+	if (!is_zero_ether_addr(ndev->config.mac)) {
+		pfmdev = pci_get_drvdata(pci_physfn(mvdev->mdev->pdev));
+		mlx5_mpfs_del_mac(pfmdev, ndev->config.mac);
+	}
 	mlx5_vdpa_free_resources(&ndev->mvdev);
 	mutex_destroy(&ndev->reslock);
 }
@@ -1962,6 +1968,7 @@ static void init_mvqs(struct mlx5_vdpa_n
 void *mlx5_vdpa_add_dev(struct mlx5_core_dev *mdev)
 {
 	struct virtio_net_config *config;
+	struct mlx5_core_dev *pfmdev;
 	struct mlx5_vdpa_dev *mvdev;
 	struct mlx5_vdpa_net *ndev;
 	u32 max_vqs;
@@ -1990,10 +1997,17 @@ void *mlx5_vdpa_add_dev(struct mlx5_core
 	if (err)
 		goto err_mtu;
 
+	if (!is_zero_ether_addr(config->mac)) {
+		pfmdev = pci_get_drvdata(pci_physfn(mdev->pdev));
+		err = mlx5_mpfs_add_mac(pfmdev, config->mac);
+		if (err)
+			goto err_mtu;
+	}
+
 	mvdev->vdev.dma_dev = mdev->device;
 	err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
 	if (err)
-		goto err_mtu;
+		goto err_mpfs;
 
 	err = alloc_resources(ndev);
 	if (err)
@@ -2009,6 +2023,9 @@ err_reg:
 	free_resources(ndev);
 err_res:
 	mlx5_vdpa_free_resources(&ndev->mvdev);
+err_mpfs:
+	if (!is_zero_ether_addr(config->mac))
+		mlx5_mpfs_del_mac(pfmdev, config->mac);
 err_mtu:
 	mutex_destroy(&ndev->reslock);
 	put_device(&mvdev->vdev.dev);
--- /dev/null
+++ b/include/linux/mlx5/mpfs.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+ * Copyright (c) 2021 Mellanox Technologies Ltd.
+ */
+
+#ifndef _MLX5_MPFS_
+#define _MLX5_MPFS_
+
+struct mlx5_core_dev;
+
+#ifdef CONFIG_MLX5_MPFS
+int  mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac);
+int  mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac);
+#else /* #ifndef CONFIG_MLX5_MPFS */
+static inline int  mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac) { return 0; }
+static inline int  mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac) { return 0; }
+#endif
+
+#endif


_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH 5.10 132/252] Revert "crypto: cavium/nitrox - add an error message to explain the failure of pci_request_mem_regions"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6a3239a738d86c5e9b5aad17fefe2c2bfd6ced83 ]

This reverts commit 9fcddaf2e28d779cb946d23838ba6d50f299aa80 as it was
submitted under a fake name and we can not knowingly accept anonymous
contributions to the repository.

This commit was part of a submission "test" to the Linux kernel
community by some "researchers" at umn.edu.  As outlined at:
	https://www-users.cs.umn.edu/%7Ekjlu/papers/full-disclosure.pdf
it was done so as an attempt to submit a known-buggy patch to see if it
could get by our review.  However, the submission turned out to actually
be correct, and not have a bug in it as the author did not understand
how the PCI driver model works at all, and so the submission was
accepted.

As this change is of useless consequence, there is no loss of
functionality in reverting it.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: linux-crypto@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Email: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/YIkTi9a3nnL50wMq@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/cavium/nitrox/nitrox_main.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/crypto/cavium/nitrox/nitrox_main.c b/drivers/crypto/cavium/nitrox/nitrox_main.c
index 9d14be97e381..cee2a2713038 100644
--- a/drivers/crypto/cavium/nitrox/nitrox_main.c
+++ b/drivers/crypto/cavium/nitrox/nitrox_main.c
@@ -451,7 +451,6 @@ static int nitrox_probe(struct pci_dev *pdev,
 	err = pci_request_mem_regions(pdev, nitrox_driver_name);
 	if (err) {
 		pci_disable_device(pdev);
-		dev_err(&pdev->dev, "Failed to request mem regions!\n");
 		return err;
 	}
 	pci_set_master(pdev);
-- 
2.30.2

[PATCH 5.10 239/252] MIPS: alchemy: xxs1500: add gpio-au1000.h header file

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit ff4cff962a7eedc73e54b5096693da7f86c61346 ]

board-xxs1500.c references 2 functions without declaring them, so add
the header file to placate the build.

../arch/mips/alchemy/board-xxs1500.c: In function 'board_setup':
../arch/mips/alchemy/board-xxs1500.c:56:2: error: implicit declaration of function 'alchemy_gpio1_input_enable' [-Werror=implicit-function-declaration]
   56 |  alchemy_gpio1_input_enable();
../arch/mips/alchemy/board-xxs1500.c:57:2: error: implicit declaration of function 'alchemy_gpio2_enable'; did you mean 'alchemy_uart_enable'? [-Werror=implicit-function-declaration]
   57 |  alchemy_gpio2_enable();

Fixes: 8e026910fcd4 ("MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/alchemy/board-xxs1500.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c
index b184baa4e56a..f175bce2987f 100644
--- a/arch/mips/alchemy/board-xxs1500.c
+++ b/arch/mips/alchemy/board-xxs1500.c
@@ -18,6 +18,7 @@
 #include <asm/reboot.h>
 #include <asm/setup.h>
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
 #include <prom.h>
 
 const char *get_system_type(void)
-- 
2.30.2

[PATCH 5.10 240/252] MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit fef532ea0cd871afab7d9a7b6e9da99ac2c24371 ]

rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However,
when this watchdog driver is built as a loadable module, there is a
build error since the rt_sysc_membase symbol is not exported.
Export it to quell the build error.

ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined!

Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/ralink/of.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index cbae9d23ab7f..a971f1aca096 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -8,6 +8,7 @@
 
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/sizes.h>
 #include <linux/of_fdt.h>
@@ -25,6 +26,7 @@
 
 __iomem void *rt_sysc_membase;
 __iomem void *rt_memc_membase;
+EXPORT_SYMBOL_GPL(rt_sysc_membase);
 
 __iomem void *plat_of_remap_node(const char *node)
 {
-- 
2.30.2