From: Shawn Guo <shawnguo@kernel.org>
To: soc@kernel.org, arm@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>,
kernel@pengutronix.de, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 5/6] i.MX arm64 device tree changes for 5.14
Date: Sun, 13 Jun 2021 16:25:43 +0800 [thread overview]
Message-ID: <20210613082544.16067-5-shawnguo@kernel.org> (raw)
In-Reply-To: <20210613082544.16067-1-shawnguo@kernel.org>
The following changes since commit 6efb943b8616ec53a5e444193dccf1af9ad627b5:
Linux 5.13-rc1 (2021-05-09 14:17:44 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.14
for you to fetch changes up to 21cc1f222e890fa989d1395e47b16777fea46e5f:
arm64: dts: imx8mn-evk: disable over current for usb (2021-06-12 17:59:43 +0800)
----------------------------------------------------------------
i.MX arm64 device tree chagnes for 5.14:
- New board support: i.MX8MM Gateworks GW7901 board.
- Add SPBA bus description for i.MX8MN and i.MX8MM.
- A series of update on imx8mq-nitrogen board to add USB OTG/Host and
LT8912 MIPI-DSI to HDMI support.
- Correct enet clock description for i.MX8 Connection Subsystem.
- A couple of patches from Heiko Schocher to add FlexSPI device for
i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som.
- Remove the reference to audio IPG clock on i.MX8MP.
- Enable EQOS Ethernet and PMIC device support for imx8mp-evk.
- Disable USB over-current on imx8mm-evk and imx8mn-evk.
- Add dma-ranges description for i.MX8MM and i.MX8MN SoC.
- Add PCIe clock description for i.MX8MQ SoC.
- Enable PCIe support on freeway board.
- Enable OPTEE support on ls1028a-rdb board.
----------------------------------------------------------------
Adam Ford (3):
arm64: dts: imx8mn: Add spba1 bus
arm64: dts: imx8mm: Add spba1 and spba2 buses
arm64: dts: imx8mn-beacon-som: Assign PMIC clock
Adrien Grassein (3):
arm64: dts: imx8mq-nitrogen: add USB OTG support
arm64: dts: imx8mq-nitrogen: add USB HOST support
arm64: dts: imx8mq-nitrogen: add lt8912 MIPI-DSI to HDMI
Dong Aisheng (1):
arm64: dts: imx8: conn: fix enet clock setting
Heiko Schocher (2):
arm64: dts: imx8mp: add flexspi node
arm64: dts: imx8mp-phycore-som: enable spi nor
Jacky Bai (1):
arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp
Joakim Zhang (1):
arm64: dts: imx8mp-evk: enable EQOS ethernet
Kornel Duleba (1):
arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges
Li Jun (2):
arm64: dts: imx8mm-evk: disable over current for usb1
arm64: dts: imx8mn-evk: disable over current for usb
Lucas Stach (3):
arm64: dts: imx8mm: specify dma-ranges
arm64: dts: imx8mn: specify dma-ranges
arm64: dts: imx8mq: assign PCIe clocks
Mian Yousaf Kaukab (2):
arm64: dts: ls1012a: enable PCIe on freeway board
arm64: dts: ls208xa: remove bus-num from dspi node
Richard Zhu (1):
arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy
Sahil Malhotra (1):
arm64: dts: ls1028a-rdb: enable optee node
Tim Harvey (1):
arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support
Uwe Kleine-König (1):
arm64: dts: imx8mp-evk: Add PMIC device
Zhen Lei (1):
arm64: dts: freescale: Separate each group of data in the property 'reg'
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts | 4 +
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 14 +-
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 +
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 24 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 12 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 24 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 24 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 16 +-
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 16 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 1 -
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 24 +-
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 50 +-
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 1 +
.../boot/dts/freescale/imx8mm-venice-gw7901.dts | 1019 ++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 363 +++----
.../boot/dts/freescale/imx8mn-beacon-som.dtsi | 3 +
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 1 +
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 147 +--
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 139 +++
.../boot/dts/freescale/imx8mp-phycore-som.dtsi | 25 +
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 18 +-
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 1 +
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 182 ++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 +
25 files changed, 1789 insertions(+), 340 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: soc@kernel.org, arm@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>,
kernel@pengutronix.de, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 5/6] i.MX arm64 device tree changes for 5.14
Date: Sun, 13 Jun 2021 16:25:43 +0800 [thread overview]
Message-ID: <20210613082544.16067-5-shawnguo@kernel.org> (raw)
Message-ID: <20210613082543.i7M1yCNzK11LdAlFvpxqWkahRX4rsd-2junhRfKPrQI@z> (raw)
In-Reply-To: <20210613082544.16067-1-shawnguo@kernel.org>
The following changes since commit 6efb943b8616ec53a5e444193dccf1af9ad627b5:
Linux 5.13-rc1 (2021-05-09 14:17:44 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.14
for you to fetch changes up to 21cc1f222e890fa989d1395e47b16777fea46e5f:
arm64: dts: imx8mn-evk: disable over current for usb (2021-06-12 17:59:43 +0800)
----------------------------------------------------------------
i.MX arm64 device tree chagnes for 5.14:
- New board support: i.MX8MM Gateworks GW7901 board.
- Add SPBA bus description for i.MX8MN and i.MX8MM.
- A series of update on imx8mq-nitrogen board to add USB OTG/Host and
LT8912 MIPI-DSI to HDMI support.
- Correct enet clock description for i.MX8 Connection Subsystem.
- A couple of patches from Heiko Schocher to add FlexSPI device for
i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som.
- Remove the reference to audio IPG clock on i.MX8MP.
- Enable EQOS Ethernet and PMIC device support for imx8mp-evk.
- Disable USB over-current on imx8mm-evk and imx8mn-evk.
- Add dma-ranges description for i.MX8MM and i.MX8MN SoC.
- Add PCIe clock description for i.MX8MQ SoC.
- Enable PCIe support on freeway board.
- Enable OPTEE support on ls1028a-rdb board.
----------------------------------------------------------------
Adam Ford (3):
arm64: dts: imx8mn: Add spba1 bus
arm64: dts: imx8mm: Add spba1 and spba2 buses
arm64: dts: imx8mn-beacon-som: Assign PMIC clock
Adrien Grassein (3):
arm64: dts: imx8mq-nitrogen: add USB OTG support
arm64: dts: imx8mq-nitrogen: add USB HOST support
arm64: dts: imx8mq-nitrogen: add lt8912 MIPI-DSI to HDMI
Dong Aisheng (1):
arm64: dts: imx8: conn: fix enet clock setting
Heiko Schocher (2):
arm64: dts: imx8mp: add flexspi node
arm64: dts: imx8mp-phycore-som: enable spi nor
Jacky Bai (1):
arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp
Joakim Zhang (1):
arm64: dts: imx8mp-evk: enable EQOS ethernet
Kornel Duleba (1):
arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges
Li Jun (2):
arm64: dts: imx8mm-evk: disable over current for usb1
arm64: dts: imx8mn-evk: disable over current for usb
Lucas Stach (3):
arm64: dts: imx8mm: specify dma-ranges
arm64: dts: imx8mn: specify dma-ranges
arm64: dts: imx8mq: assign PCIe clocks
Mian Yousaf Kaukab (2):
arm64: dts: ls1012a: enable PCIe on freeway board
arm64: dts: ls208xa: remove bus-num from dspi node
Richard Zhu (1):
arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy
Sahil Malhotra (1):
arm64: dts: ls1028a-rdb: enable optee node
Tim Harvey (1):
arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support
Uwe Kleine-König (1):
arm64: dts: imx8mp-evk: Add PMIC device
Zhen Lei (1):
arm64: dts: freescale: Separate each group of data in the property 'reg'
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts | 4 +
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 14 +-
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 +
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 24 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 12 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 24 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 24 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 16 +-
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 16 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 1 -
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 24 +-
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 50 +-
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 1 +
.../boot/dts/freescale/imx8mm-venice-gw7901.dts | 1019 ++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 363 +++----
.../boot/dts/freescale/imx8mn-beacon-som.dtsi | 3 +
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 1 +
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 147 +--
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 139 +++
.../boot/dts/freescale/imx8mp-phycore-som.dtsi | 25 +
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 18 +-
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 1 +
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 182 ++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 +
25 files changed, 1789 insertions(+), 340 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-13 8:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-13 8:25 [GIT PULL 1/6] i.MX drivers update for 5.14 Shawn Guo
2021-06-13 8:25 ` Shawn Guo
2021-06-13 8:25 ` [GIT PULL 2/6] i.MX SoC changes " Shawn Guo
2021-06-13 8:25 ` Shawn Guo
2021-06-13 8:25 ` [GIT PULL 3/6] i.MX dt-bindings update " Shawn Guo
2021-06-13 8:25 ` Shawn Guo
2021-06-13 8:25 ` [GIT PULL 4/6] i.MX device tree changes " Shawn Guo
2021-06-13 8:25 ` Shawn Guo
2021-06-13 8:25 ` Shawn Guo [this message]
2021-06-13 8:25 ` [GIT PULL 5/6] i.MX arm64 " Shawn Guo
2021-06-13 8:25 ` [GIT PULL 6/6] i.MX defconfig update " Shawn Guo
2021-06-13 8:25 ` Shawn Guo
2021-06-15 16:00 ` [GIT PULL 1/6] i.MX drivers " patchwork-bot+linux-soc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210613082544.16067-5-shawnguo@kernel.org \
--to=shawnguo@kernel.org \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.