Re: [PATCH net-next] net: phy: marvell10g: enable WoL for mv2110

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Wed, Jun 23, 2021 at 09:09:29PM +0800, Ling Pei Lee wrote:
> @@ -106,6 +107,17 @@ enum {
>  	MV_V2_TEMP_CTRL_DISABLE	= 0xc000,
>  	MV_V2_TEMP		= 0xf08c,
>  	MV_V2_TEMP_UNKNOWN	= 0x9600, /* unknown function */
> +	MV_V2_MAGIC_PKT_WORD0	= 0xf06b,
> +	MV_V2_MAGIC_PKT_WORD1	= 0xf06c,
> +	MV_V2_MAGIC_PKT_WORD2	= 0xf06d,
> +	/* Wake on LAN registers */
> +	MV_V2_WOL_CTRL		= 0xf06e,
> +	MV_V2_WOL_STS		= 0xf06f,
> +	MV_V2_WOL_CLEAR_STS	= BIT(15),
> +	MV_V2_WOL_MAGIC_PKT_EN	= BIT(0),
> +	MV_V2_PORT_INTR_STS	= 0xf040,
> +	MV_V2_PORT_INTR_MASK	= 0xf043,
> +	MV_V2_WOL_INTR_EN	= BIT(8),

Please put these new register definitions in address order. This list is
first sorted by MMD and then by address. So these should be before the
definition of MV_V2_TEMP_CTRL.

As I suspected, the 88x3310 shares this same register layout for the WOL
and at least bit 8 of the interrupt status and enable registers.

Thanks, and thanks for reminding me to look at this today!

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!