Re: [PATCH] dt-bindings: riscv: add starfive jh7100 compatibles

[Drew Fustini <drew@beagleboard.org>]

On Thu, Jun 24, 2021 at 03:20:18PM -0600, Rob Herring wrote:
> On Wed, Jun 16, 2021 at 01:27:00PM -0700, Drew Fustini wrote:
> > Add DT binding documentation for the StarFive JH7100 Soc [1] and the
> > BeagleV Starlight JH7100 board [2].
> > 
> > [1] https://github.com/starfive-tech/beaglev_doc
> > [2] https://github.com/beagleboard/beaglev-starlight
> > 
> > Signed-off-by: Drew Fustini <drew@beagleboard.org>
> > ---
> > Note: my patch to add 'starfive' to vendor-prefixes.yaml was applied by
> > Rob back on June 2:
> > https://lore.kernel.org/linux-devicetree/20210602163200.GA3513985@robh.at.kernel.org/
> > 
> > I ran dt_binding_check and dtbs_check: 
> > 
> >   $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \
> >   DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml 
> >   CHKDT   Documentation/devicetree/bindings/processed-schema-examples.json
> >   SCHEMA  Documentation/devicetree/bindings/processed-schema-examples.json
> >   DTC     Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml
> >   CHECK   Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml
> > 
> >   $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \
> >   DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml
> >   SCHEMA  Documentation/devicetree/bindings/processed-schema.json
> >   DTC     arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml
> >   CHECK   arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml
> > 
> > The files jh7100.dtsi and jh7100-beaglev-starlight.dts are in the
> > process of being cleaned up for submission. The current downstream is:
> > https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive
> > 
> >  .../devicetree/bindings/riscv/starfive.yaml   | 30 +++++++++++++++++++
> >  1 file changed, 30 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml
> > new file mode 100644
> > index 000000000000..4deae9f5c60d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/riscv/starfive.yaml
> > @@ -0,0 +1,30 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/riscv/starfive.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: StarFive SoC-based boards
> > +
> > +maintainers:
> > +  - Michael Zhu <michael.zhu@starfivetech.com>
> > +  - Drew Fustini <drew@beagleboard.org>
> > +
> > +description:
> > +  SiFive SoC-based boards
> > +
> > +properties:
> > +  $nodename:
> > +    const: '/'
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +          - const: beagle,beaglev-starlight-jh7100
> > +          - const: starfive,jh7100
> > +
> > +      - items:
> > +          - const: starfive,jh7100
> 
> This alone shouldn't be valid.

Thank you for pointing this out.  I have removed that const item and the
dtbs_check still completes ok.  I will send a v2.

Drew

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv