From: Rob Herring <robh@kernel.org>
To: Corentin Labbe <clabbe@baylibre.com>
Cc: arnd@arndb.de, linus.walleij@linaro.org, olof@lixom.net,
soc@kernel.org, ulli.kroll@googlemail.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 5/5] ARM: gemini: add device tree for ssi1328
Date: Mon, 12 Jul 2021 14:11:25 -0600 [thread overview]
Message-ID: <20210712201125.GA2401230@robh.at.kernel.org> (raw)
In-Reply-To: <20210618205533.1527384-6-clabbe@baylibre.com>
On Fri, Jun 18, 2021 at 08:55:33PM +0000, Corentin Labbe wrote:
> The SSI 1328 is a NAS box running a SL3516 SoC.
>
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/gemini-ssi1328.dts | 138 +++++++++++++++++++++++++++
> 2 files changed, 139 insertions(+)
> create mode 100644 arch/arm/boot/dts/gemini-ssi1328.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 806715f3266d..49bf7af72111 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -221,6 +221,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
> gemini-rut1xx.dtb \
> gemini-sl93512r.dtb \
> gemini-sq201.dtb \
> + gemini-ssi1328.dtb \
> gemini-wbd111.dtb \
> gemini-wbd222.dtb
> dtb-$(CONFIG_ARCH_HI3xxx) += \
> diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
> new file mode 100644
> index 000000000000..2b3e7db84fed
> --- /dev/null
> +++ b/arch/arm/boot/dts/gemini-ssi1328.dts
> @@ -0,0 +1,138 @@
> +// SPDX-License-Identifier: GPL-2.0
Dual license? No one runs BSD or other OS on these devices?
> +/*
> + * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
> + * Device Tree file for SSI 1328
> + */
> +
> +/dts-v1/;
> +
> +#include "gemini.dtsi"
Though the license should match this file.
> +
> +/ {
> + model = "SSI 1328";
> + compatible = "ssi,1328", "cortina,gemini";
Where's ssi,1328 documented?
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + memory@0 {
> + /* 128 MB */
> + device_type = "memory";
> + reg = <0x00000000 0x8000000>;
> + };
> +
> + aliases {
> + mdio-gpio0 = &mdio0;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
> + stdout-path = &uart0;
Don't need both 'console' and stdout-path. (console should be removed)
> + };
> +
> + mdio0: mdio {
> + compatible = "virtual,mdio-gpio";
> + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
> + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* LAN Marvell 88E1118 */
> + phy0: ethernet-phy@1 {
> + reg = <1>;
> + device_type = "ethernet-phy";
> + /* We lack the knowledge of necessary GPIO to achieve
> + * Gigabit
> + */
> + max-speed = <100>;
> + };
> + /* WAN ICPlus IP101A */
> + phy1: ethernet-phy@2 {
> + reg = <2>;
> + device_type = "ethernet-phy";
> + };
> + };
> +};
> +
> +ðernet {
> + status = "okay";
> + ethernet-port@0 {
> + phy-mode = "rgmii";
> + phy-handle = <&phy0>;
> + };
> + ethernet-port@1 {
> + phy-mode = "rgmii";
> + phy-handle = <&phy1>;
> + };
> +};
> +
> +&flash {
> + status = "okay";
> + /* 32MB of flash */
> + reg = <0x30000000 0x03200000>;
> +
> + pinctrl-names = "enabled", "disabled";
> + pinctrl-0 = <&pflash_default_pins>;
> + pinctrl-1 = <&pflash_disabled_pins>;
> +
> + partitions {
> + compatible = "redboot-fis";
> + /* Eraseblock at 0xfe0000 */
> + fis-index-block = <0x7F>;
> + };
> +};
> +
> +&gpio0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio0_default_pins>;
> +};
> +
> +&ide0 {
> + status = "okay";
> +};
> +
> +&ide1 {
> + status = "okay";
> +};
> +
> +&sata {
> + cortina,gemini-ata-muxmode = <0>;
> + cortina,gemini-enable-sata-bridge;
> + status = "okay";
> +};
> +
> +&syscon {
> + pinctrl {
> + /*
> + * gpio0agrp cover line 0-4
> + * gpio0bgrp cover line 5
> + */
> + gpio0_default_pins: pinctrl-gpio0 {
> + mux {
> + function = "gpio0";
> + groups = "gpio0agrp", "gpio0bgrp";
> + };
> + };
> + pflash_disabled_pins: pinctrl-pflash-disabled {
> + mux {
> + function = "gpio0";
> + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
> + "gpio0kgrp";
> + };
> + };
> + pinctrl-gmii {
> + /* This platform use both the ethernet ports */
> + mux {
> + function = "gmii";
> + groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
> + };
> + };
> + };
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> --
> 2.31.1
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Corentin Labbe <clabbe@baylibre.com>
Cc: arnd@arndb.de, linus.walleij@linaro.org, olof@lixom.net,
soc@kernel.org, ulli.kroll@googlemail.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 5/5] ARM: gemini: add device tree for ssi1328
Date: Mon, 12 Jul 2021 14:11:25 -0600 [thread overview]
Message-ID: <20210712201125.GA2401230@robh.at.kernel.org> (raw)
Message-ID: <20210712201125.QliN-e4ezYcaHHdPivfEk1HkBxv1ilDsusJz4oAkC8k@z> (raw)
In-Reply-To: <20210618205533.1527384-6-clabbe@baylibre.com>
On Fri, Jun 18, 2021 at 08:55:33PM +0000, Corentin Labbe wrote:
> The SSI 1328 is a NAS box running a SL3516 SoC.
>
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/gemini-ssi1328.dts | 138 +++++++++++++++++++++++++++
> 2 files changed, 139 insertions(+)
> create mode 100644 arch/arm/boot/dts/gemini-ssi1328.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 806715f3266d..49bf7af72111 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -221,6 +221,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
> gemini-rut1xx.dtb \
> gemini-sl93512r.dtb \
> gemini-sq201.dtb \
> + gemini-ssi1328.dtb \
> gemini-wbd111.dtb \
> gemini-wbd222.dtb
> dtb-$(CONFIG_ARCH_HI3xxx) += \
> diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
> new file mode 100644
> index 000000000000..2b3e7db84fed
> --- /dev/null
> +++ b/arch/arm/boot/dts/gemini-ssi1328.dts
> @@ -0,0 +1,138 @@
> +// SPDX-License-Identifier: GPL-2.0
Dual license? No one runs BSD or other OS on these devices?
> +/*
> + * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
> + * Device Tree file for SSI 1328
> + */
> +
> +/dts-v1/;
> +
> +#include "gemini.dtsi"
Though the license should match this file.
> +
> +/ {
> + model = "SSI 1328";
> + compatible = "ssi,1328", "cortina,gemini";
Where's ssi,1328 documented?
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + memory@0 {
> + /* 128 MB */
> + device_type = "memory";
> + reg = <0x00000000 0x8000000>;
> + };
> +
> + aliases {
> + mdio-gpio0 = &mdio0;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
> + stdout-path = &uart0;
Don't need both 'console' and stdout-path. (console should be removed)
> + };
> +
> + mdio0: mdio {
> + compatible = "virtual,mdio-gpio";
> + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
> + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* LAN Marvell 88E1118 */
> + phy0: ethernet-phy@1 {
> + reg = <1>;
> + device_type = "ethernet-phy";
> + /* We lack the knowledge of necessary GPIO to achieve
> + * Gigabit
> + */
> + max-speed = <100>;
> + };
> + /* WAN ICPlus IP101A */
> + phy1: ethernet-phy@2 {
> + reg = <2>;
> + device_type = "ethernet-phy";
> + };
> + };
> +};
> +
> +ðernet {
> + status = "okay";
> + ethernet-port@0 {
> + phy-mode = "rgmii";
> + phy-handle = <&phy0>;
> + };
> + ethernet-port@1 {
> + phy-mode = "rgmii";
> + phy-handle = <&phy1>;
> + };
> +};
> +
> +&flash {
> + status = "okay";
> + /* 32MB of flash */
> + reg = <0x30000000 0x03200000>;
> +
> + pinctrl-names = "enabled", "disabled";
> + pinctrl-0 = <&pflash_default_pins>;
> + pinctrl-1 = <&pflash_disabled_pins>;
> +
> + partitions {
> + compatible = "redboot-fis";
> + /* Eraseblock at 0xfe0000 */
> + fis-index-block = <0x7F>;
> + };
> +};
> +
> +&gpio0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio0_default_pins>;
> +};
> +
> +&ide0 {
> + status = "okay";
> +};
> +
> +&ide1 {
> + status = "okay";
> +};
> +
> +&sata {
> + cortina,gemini-ata-muxmode = <0>;
> + cortina,gemini-enable-sata-bridge;
> + status = "okay";
> +};
> +
> +&syscon {
> + pinctrl {
> + /*
> + * gpio0agrp cover line 0-4
> + * gpio0bgrp cover line 5
> + */
> + gpio0_default_pins: pinctrl-gpio0 {
> + mux {
> + function = "gpio0";
> + groups = "gpio0agrp", "gpio0bgrp";
> + };
> + };
> + pflash_disabled_pins: pinctrl-pflash-disabled {
> + mux {
> + function = "gpio0";
> + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
> + "gpio0kgrp";
> + };
> + };
> + pinctrl-gmii {
> + /* This platform use both the ethernet ports */
> + mux {
> + function = "gmii";
> + groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
> + };
> + };
> + };
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> --
> 2.31.1
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-12 20:11 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-18 20:55 [PATCH v2 0/5] ARM: gemini: add two more board Corentin Labbe
2021-06-18 20:55 ` Corentin Labbe
2021-06-18 20:55 ` [PATCH v2 1/5] ARM: dts: gemini: add labels for USB, IDE, flash and ethernet Corentin Labbe
2021-06-18 20:55 ` Corentin Labbe
2021-06-18 20:55 ` [PATCH v2 2/5] dt-bindings: add vendor prefix for edimax Corentin Labbe
2021-06-18 20:55 ` Corentin Labbe
2021-07-12 20:11 ` Rob Herring
2021-07-12 20:11 ` Rob Herring
2021-06-18 20:55 ` [PATCH v2 3/5] dt-bindings: add vendor prefix for ssi Corentin Labbe
2021-06-18 20:55 ` Corentin Labbe
2021-07-12 20:11 ` Rob Herring
2021-07-12 20:11 ` Rob Herring
2021-06-18 20:55 ` [PATCH v2 4/5] ARM: gemini: add device tree for edimax NS2502 Corentin Labbe
2021-06-18 20:55 ` Corentin Labbe
2021-06-18 20:55 ` [PATCH v2 5/5] ARM: gemini: add device tree for ssi1328 Corentin Labbe
2021-06-18 20:55 ` Corentin Labbe
2021-07-12 20:11 ` Rob Herring [this message]
2021-07-12 20:11 ` Rob Herring
2021-07-23 10:38 ` Linus Walleij
2021-07-23 10:38 ` Linus Walleij
2021-07-23 10:34 ` [PATCH v2 0/5] ARM: gemini: add two more board Linus Walleij
2021-07-23 10:34 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210712201125.GA2401230@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=arnd@arndb.de \
--cc=clabbe@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=soc@kernel.org \
--cc=ulli.kroll@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.