From: Rob Herring <robh@kernel.org>
To: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Cc: sean@mess.org, mchehab@kernel.org, khilman@baylibre.com,
narmstrong@baylibre.com, jbrunet@baylibre.com,
martin.blumenstingl@googlemail.com, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, rockosov@gmail.com
Subject: Re: [PATCH v3 1/2] media: rc: meson-irblaster: document device tree bindings
Date: Wed, 14 Jul 2021 17:23:03 -0600 [thread overview]
Message-ID: <20210714232303.GA3730974@robh.at.kernel.org> (raw)
In-Reply-To: <20210709165753.29353-2-viktor.prutyanov@phystech.edu>
On Fri, Jul 09, 2021 at 07:57:52PM +0300, Viktor Prutyanov wrote:
> This patch adds binding documentation for the IR transmitter
> available in Amlogic Meson SoCs.
>
> Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
> ---
> changes in v2:
> - compatible = "amlogic,meson-g12a-irblaster" added
> - clocks, clock-names and mod-clock updated
> changes in v3:
> - mod-clock removed
> - max-fifo-level added
>
> .../media/amlogic,meson-irblaster.yaml | 65 +++++++++++++++++++
> 1 file changed, 65 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml
> new file mode 100644
> index 000000000000..1e10aa0d3a94
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/amlogic,meson-irblaster.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Amlogic Meson IR blaster
> +
> +maintainers:
> + - Viktor Prutyanov <viktor.prutyanov@phystech.edu>
> +
> +description: |
> + Some Amlogic SoCs such as A311D and T950D4 have IR transmitter
> + (blaster) controller onboard. It is capable of sending IR signals
> + with arbitrary carrier frequency and duty cycle.
> +
> +properties:
> + compatible:
> + oneOf:
> + - const: amlogic,meson-irblaster
> + - items:
> + - const: amlogic,meson-g12a-irblaster
> + - const: amlogic,meson-irblaster
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 2
> +
> + clock-names:
> + items:
> + - const: sysclk
> + - const: xtal
> +
> + max-fifo-level:
> + maxItems: 1
An array?
Needs a vendor prefix, type reference and constraints on allowed values.
> + description:
> + Maximum IR blaster FIFO fill level
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/clock/g12a-clkc.h>
> +
> + irblaster@ff80014c {
> + compatible = "amlogic,meson-g12a-irblaster", "amlogic,meson-irblaster";
> + reg = <0xff80014c 0x10>;
> + interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&clkc CLKID_CLK81>, <&xtal>;
> + clock-names = "sysclk", "xtal";
> + };
> --
> 2.21.0
>
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Cc: sean@mess.org, mchehab@kernel.org, khilman@baylibre.com,
narmstrong@baylibre.com, jbrunet@baylibre.com,
martin.blumenstingl@googlemail.com, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, rockosov@gmail.com
Subject: Re: [PATCH v3 1/2] media: rc: meson-irblaster: document device tree bindings
Date: Wed, 14 Jul 2021 17:23:03 -0600 [thread overview]
Message-ID: <20210714232303.GA3730974@robh.at.kernel.org> (raw)
In-Reply-To: <20210709165753.29353-2-viktor.prutyanov@phystech.edu>
On Fri, Jul 09, 2021 at 07:57:52PM +0300, Viktor Prutyanov wrote:
> This patch adds binding documentation for the IR transmitter
> available in Amlogic Meson SoCs.
>
> Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
> ---
> changes in v2:
> - compatible = "amlogic,meson-g12a-irblaster" added
> - clocks, clock-names and mod-clock updated
> changes in v3:
> - mod-clock removed
> - max-fifo-level added
>
> .../media/amlogic,meson-irblaster.yaml | 65 +++++++++++++++++++
> 1 file changed, 65 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml
> new file mode 100644
> index 000000000000..1e10aa0d3a94
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/amlogic,meson-irblaster.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Amlogic Meson IR blaster
> +
> +maintainers:
> + - Viktor Prutyanov <viktor.prutyanov@phystech.edu>
> +
> +description: |
> + Some Amlogic SoCs such as A311D and T950D4 have IR transmitter
> + (blaster) controller onboard. It is capable of sending IR signals
> + with arbitrary carrier frequency and duty cycle.
> +
> +properties:
> + compatible:
> + oneOf:
> + - const: amlogic,meson-irblaster
> + - items:
> + - const: amlogic,meson-g12a-irblaster
> + - const: amlogic,meson-irblaster
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 2
> +
> + clock-names:
> + items:
> + - const: sysclk
> + - const: xtal
> +
> + max-fifo-level:
> + maxItems: 1
An array?
Needs a vendor prefix, type reference and constraints on allowed values.
> + description:
> + Maximum IR blaster FIFO fill level
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/clock/g12a-clkc.h>
> +
> + irblaster@ff80014c {
> + compatible = "amlogic,meson-g12a-irblaster", "amlogic,meson-irblaster";
> + reg = <0xff80014c 0x10>;
> + interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&clkc CLKID_CLK81>, <&xtal>;
> + clock-names = "sysclk", "xtal";
> + };
> --
> 2.21.0
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Cc: sean@mess.org, mchehab@kernel.org, khilman@baylibre.com,
narmstrong@baylibre.com, jbrunet@baylibre.com,
martin.blumenstingl@googlemail.com, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, rockosov@gmail.com
Subject: Re: [PATCH v3 1/2] media: rc: meson-irblaster: document device tree bindings
Date: Wed, 14 Jul 2021 17:23:03 -0600 [thread overview]
Message-ID: <20210714232303.GA3730974@robh.at.kernel.org> (raw)
In-Reply-To: <20210709165753.29353-2-viktor.prutyanov@phystech.edu>
On Fri, Jul 09, 2021 at 07:57:52PM +0300, Viktor Prutyanov wrote:
> This patch adds binding documentation for the IR transmitter
> available in Amlogic Meson SoCs.
>
> Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
> ---
> changes in v2:
> - compatible = "amlogic,meson-g12a-irblaster" added
> - clocks, clock-names and mod-clock updated
> changes in v3:
> - mod-clock removed
> - max-fifo-level added
>
> .../media/amlogic,meson-irblaster.yaml | 65 +++++++++++++++++++
> 1 file changed, 65 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml
> new file mode 100644
> index 000000000000..1e10aa0d3a94
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/amlogic,meson-irblaster.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/amlogic,meson-irblaster.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Amlogic Meson IR blaster
> +
> +maintainers:
> + - Viktor Prutyanov <viktor.prutyanov@phystech.edu>
> +
> +description: |
> + Some Amlogic SoCs such as A311D and T950D4 have IR transmitter
> + (blaster) controller onboard. It is capable of sending IR signals
> + with arbitrary carrier frequency and duty cycle.
> +
> +properties:
> + compatible:
> + oneOf:
> + - const: amlogic,meson-irblaster
> + - items:
> + - const: amlogic,meson-g12a-irblaster
> + - const: amlogic,meson-irblaster
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 2
> +
> + clock-names:
> + items:
> + - const: sysclk
> + - const: xtal
> +
> + max-fifo-level:
> + maxItems: 1
An array?
Needs a vendor prefix, type reference and constraints on allowed values.
> + description:
> + Maximum IR blaster FIFO fill level
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/clock/g12a-clkc.h>
> +
> + irblaster@ff80014c {
> + compatible = "amlogic,meson-g12a-irblaster", "amlogic,meson-irblaster";
> + reg = <0xff80014c 0x10>;
> + interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&clkc CLKID_CLK81>, <&xtal>;
> + clock-names = "sysclk", "xtal";
> + };
> --
> 2.21.0
>
>
next prev parent reply other threads:[~2021-07-15 0:23 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-09 16:57 [PATCH v3 0/2] media: rc: add support for Amlogic Meson IR blaster Viktor Prutyanov
2021-07-09 16:57 ` Viktor Prutyanov
2021-07-09 16:57 ` Viktor Prutyanov
2021-07-09 16:57 ` [PATCH v3 1/2] media: rc: meson-irblaster: document device tree bindings Viktor Prutyanov
2021-07-09 16:57 ` Viktor Prutyanov
2021-07-09 16:57 ` Viktor Prutyanov
2021-07-14 23:23 ` Rob Herring [this message]
2021-07-14 23:23 ` Rob Herring
2021-07-14 23:23 ` Rob Herring
2021-07-09 16:57 ` [PATCH v3 2/2] media: rc: introduce Meson IR blaster driver Viktor Prutyanov
2021-07-09 16:57 ` Viktor Prutyanov
2021-07-09 16:57 ` Viktor Prutyanov
2021-07-09 21:32 ` kernel test robot
2021-07-09 21:32 ` kernel test robot
2021-07-09 22:11 ` Sean Young
2021-07-09 22:11 ` Sean Young
2021-07-09 22:11 ` Sean Young
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210714232303.GA3730974@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mchehab@kernel.org \
--cc=narmstrong@baylibre.com \
--cc=rockosov@gmail.com \
--cc=sean@mess.org \
--cc=viktor.prutyanov@phystech.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.