[PATCH v1 55/55] KVM: PPC: Book3S HV P9: Remove subcore HMI handling

[Nicholas Piggin <npiggin@gmail.com>]

On POWER9 and newer, rather than the complex HMI synchronisation and
subcore state, have each thread un-apply the guest TB offset before
calling into the early HMI handler.

This allows the subcore state to be avoided, including subcore enter
/ exit guest, which includes an expensive divide that shows up
slightly in profiles.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kvm/book3s_hv.c          | 12 +++++-----
 arch/powerpc/kvm/book3s_hv_hmi.c      |  7 +++++-
 arch/powerpc/kvm/book3s_hv_p9_entry.c | 32 ++++++++++++++++++++++++++-
 arch/powerpc/kvm/book3s_hv_ras.c      |  4 ++++
 4 files changed, 46 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index b727b2cfad98..3f62ada1a669 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -3994,8 +3994,6 @@ static int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
 
 	vcpu->arch.ceded = 0;
 
-	kvmppc_subcore_enter_guest();
-
 	vcpu_vpa_increment_dispatch(vcpu);
 
 	if (kvmhv_on_pseries()) {
@@ -4048,8 +4046,6 @@ static int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
 
 	vcpu_vpa_increment_dispatch(vcpu);
 
-	kvmppc_subcore_exit_guest();
-
 	return trap;
 }
 
@@ -6031,9 +6027,11 @@ static int kvmppc_book3s_init_hv(void)
 	if (r)
 		return r;
 
-	r = kvm_init_subcore_bitmap();
-	if (r)
-		return r;
+	if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
+		r = kvm_init_subcore_bitmap();
+		if (r)
+			return r;
+	}
 
 	/*
 	 * We need a way of accessing the XICS interrupt controller,
diff --git a/arch/powerpc/kvm/book3s_hv_hmi.c b/arch/powerpc/kvm/book3s_hv_hmi.c
index 9af660476314..1ec50c69678b 100644
--- a/arch/powerpc/kvm/book3s_hv_hmi.c
+++ b/arch/powerpc/kvm/book3s_hv_hmi.c
@@ -20,10 +20,15 @@ void wait_for_subcore_guest_exit(void)
 
 	/*
 	 * NULL bitmap pointer indicates that KVM module hasn't
-	 * been loaded yet and hence no guests are running.
+	 * been loaded yet and hence no guests are running, or running
+	 * on POWER9 or newer CPU.
+	 *
 	 * If no KVM is in use, no need to co-ordinate among threads
 	 * as all of them will always be in host and no one is going
 	 * to modify TB other than the opal hmi handler.
+	 *
+	 * POWER9 and newer don't need this synchronisation.
+	 *
 	 * Hence, just return from here.
 	 */
 	if (!local_paca->sibling_subcore_state)
diff --git a/arch/powerpc/kvm/book3s_hv_p9_entry.c b/arch/powerpc/kvm/book3s_hv_p9_entry.c
index 032ca6dfd83c..d23e1ef2e3a7 100644
--- a/arch/powerpc/kvm/book3s_hv_p9_entry.c
+++ b/arch/powerpc/kvm/book3s_hv_p9_entry.c
@@ -3,6 +3,7 @@
 #include <linux/kvm_host.h>
 #include <asm/asm-prototypes.h>
 #include <asm/dbell.h>
+#include <asm/interrupt.h>
 #include <asm/kvm_ppc.h>
 #include <asm/pmc.h>
 #include <asm/ppc-opcode.h>
@@ -927,7 +928,36 @@ int kvmhv_vcpu_entry_p9(struct kvm_vcpu *vcpu, u64 time_limit, unsigned long lpc
 		kvmppc_realmode_machine_check(vcpu);
 
 	} else if (unlikely(trap = BOOK3S_INTERRUPT_HMI)) {
-		kvmppc_realmode_hmi_handler();
+		/*
+		 * Unapply and clear the offset first. That way, if the TB
+		 * was fine then no harm done, if it is corrupted then the
+		 * HMI resync will bring it back to host mode. This way, we
+		 * don't need to actualy know whether not OPAL resynced the
+		 * timebase. Although it would be cleaner if we could rely
+		 * on that, early POWER9 OPAL did not support the
+		 * OPAL_HANDLE_HMI2 call.
+		 */
+		if (vc->tb_offset_applied) {
+			u64 new_tb = mftb() - vc->tb_offset_applied;
+			mtspr(SPRN_TBU40, new_tb);
+			if ((mftb() & 0xffffff) < (new_tb & 0xffffff)) {
+				new_tb += 0x1000000;
+				mtspr(SPRN_TBU40, new_tb);
+			}
+			vc->tb_offset_applied = 0;
+		}
+
+		hmi_exception_realmode(NULL);
+
+		if (vc->tb_offset) {
+			u64 new_tb = mftb() + vc->tb_offset;
+			mtspr(SPRN_TBU40, new_tb);
+			if ((mftb() & 0xffffff) < (new_tb & 0xffffff)) {
+				new_tb += 0x1000000;
+				mtspr(SPRN_TBU40, new_tb);
+			}
+			vc->tb_offset_applied = vc->tb_offset;
+		}
 
 	} else if (trap = BOOK3S_INTERRUPT_H_EMUL_ASSIST) {
 		vcpu->arch.emul_inst = mfspr(SPRN_HEIR);
diff --git a/arch/powerpc/kvm/book3s_hv_ras.c b/arch/powerpc/kvm/book3s_hv_ras.c
index d4bca93b79f6..a49ee9bdab67 100644
--- a/arch/powerpc/kvm/book3s_hv_ras.c
+++ b/arch/powerpc/kvm/book3s_hv_ras.c
@@ -136,6 +136,10 @@ void kvmppc_realmode_machine_check(struct kvm_vcpu *vcpu)
 	vcpu->arch.mce_evt = mce_evt;
 }
 
+/*
+ * This subcore HMI handling is all only for pre-POWER9 CPUs.
+ */
+
 /* Check if dynamic split is in force and return subcore size accordingly. */
 static inline int kvmppc_cur_subcore_size(void)
 {
-- 
2.23.0