All of lore.kernel.org
 help / color / mirror / Atom feed
From: Raag Jadav <raagjadav@gmail.com>
To: Li Yang <leoyang.li@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>,
	 "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>, lkml <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: ls1046a: fix eeprom entries
Date: Wed, 4 Aug 2021 01:14:54 +0530	[thread overview]
Message-ID: <20210803194454.GA9471@localhost> (raw)
In-Reply-To: <CADRPPNQ2M1N1pV2brfFRXOf1ASK2bhiZpQivNhNws_+RUfCT-g@mail.gmail.com>

On Mon, Aug 02, 2021 at 05:44:29PM -0500, Li Yang wrote:
> On Mon, Aug 2, 2021 at 1:10 PM Raag Jadav <raagjadav@gmail.com> wrote:
> >
> > ls1046afrwy and ls1046ardb boards have CAT24C04[1] and CAT24C05[2]
> > eeproms respectively. Both are 4Kb (512 bytes) in size.
> 
> These part names are from onsemi instead of atmel.  Are there same
> part names from atmel which are also compatible with the onsemi parts?

The part names are different, but they are functionally compatible.

>  If we want to use onsemi only part names, probably we will need two
> compatible strings with the first one from onsemi and the second from
> atmel.  Although the binding doesn't support onsemi prefix yet.

Should I add it to the at24 binding document with atmel as a fallback?

> 
> > Remove multi-address entries, as we have auto-rollover support
> > in at24 driver.
> 
> The device tree should describe hardware instead of matching how
> driver deal with it.  Is the board really using a single chip or
> multiple chips here?

Yes, both the boards have a single chip each.

> 
> >
> > [1] https://www.onsemi.com/pdf/datasheet/cat24c01-d.pdf
> > [2] https://www.onsemi.com/pdf/datasheet/cat24c03-d.pdf
> >
> > Signed-off-by: Raag Jadav <raagjadav@gmail.com>
> > ---
> >  arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 8 +-------
> >  arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts  | 7 +------
> >  2 files changed, 2 insertions(+), 13 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> > index db3d303..83afe21 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> > @@ -83,15 +83,9 @@
> >                         };
> >
> >                         eeprom@52 {
> > -                               compatible = "atmel,24c512";
> > +                               compatible = "atmel,24c04";
> >                                 reg = <0x52>;
> >                         };
> > -
> > -                       eeprom@53 {
> > -                               compatible = "atmel,24c512";
> > -                               reg = <0x53>;
> > -                       };
> > -
> >                 };
> >         };
> >  };
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > index 60acdf0..d220f98 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > @@ -59,14 +59,9 @@
> >         };
> >
> >         eeprom@52 {
> > -               compatible = "atmel,24c512";
> > +               compatible = "atmel,24c04";
> >                 reg = <0x52>;
> >         };
> > -
> > -       eeprom@53 {
> > -               compatible = "atmel,24c512";
> > -               reg = <0x53>;
> > -       };
> >  };
> >
> >  &i2c3 {
> > --
> > 2.7.4
> >

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Raag Jadav <raagjadav@gmail.com>
To: Li Yang <leoyang.li@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
	<linux-arm-kernel@lists.infradead.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>, lkml <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: ls1046a: fix eeprom entries
Date: Wed, 4 Aug 2021 01:14:54 +0530	[thread overview]
Message-ID: <20210803194454.GA9471@localhost> (raw)
In-Reply-To: <CADRPPNQ2M1N1pV2brfFRXOf1ASK2bhiZpQivNhNws_+RUfCT-g@mail.gmail.com>

On Mon, Aug 02, 2021 at 05:44:29PM -0500, Li Yang wrote:
> On Mon, Aug 2, 2021 at 1:10 PM Raag Jadav <raagjadav@gmail.com> wrote:
> >
> > ls1046afrwy and ls1046ardb boards have CAT24C04[1] and CAT24C05[2]
> > eeproms respectively. Both are 4Kb (512 bytes) in size.
> 
> These part names are from onsemi instead of atmel.  Are there same
> part names from atmel which are also compatible with the onsemi parts?

The part names are different, but they are functionally compatible.

>  If we want to use onsemi only part names, probably we will need two
> compatible strings with the first one from onsemi and the second from
> atmel.  Although the binding doesn't support onsemi prefix yet.

Should I add it to the at24 binding document with atmel as a fallback?

> 
> > Remove multi-address entries, as we have auto-rollover support
> > in at24 driver.
> 
> The device tree should describe hardware instead of matching how
> driver deal with it.  Is the board really using a single chip or
> multiple chips here?

Yes, both the boards have a single chip each.

> 
> >
> > [1] https://www.onsemi.com/pdf/datasheet/cat24c01-d.pdf
> > [2] https://www.onsemi.com/pdf/datasheet/cat24c03-d.pdf
> >
> > Signed-off-by: Raag Jadav <raagjadav@gmail.com>
> > ---
> >  arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 8 +-------
> >  arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts  | 7 +------
> >  2 files changed, 2 insertions(+), 13 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> > index db3d303..83afe21 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> > @@ -83,15 +83,9 @@
> >                         };
> >
> >                         eeprom@52 {
> > -                               compatible = "atmel,24c512";
> > +                               compatible = "atmel,24c04";
> >                                 reg = <0x52>;
> >                         };
> > -
> > -                       eeprom@53 {
> > -                               compatible = "atmel,24c512";
> > -                               reg = <0x53>;
> > -                       };
> > -
> >                 };
> >         };
> >  };
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > index 60acdf0..d220f98 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > @@ -59,14 +59,9 @@
> >         };
> >
> >         eeprom@52 {
> > -               compatible = "atmel,24c512";
> > +               compatible = "atmel,24c04";
> >                 reg = <0x52>;
> >         };
> > -
> > -       eeprom@53 {
> > -               compatible = "atmel,24c512";
> > -               reg = <0x53>;
> > -       };
> >  };
> >
> >  &i2c3 {
> > --
> > 2.7.4
> >

  reply	other threads:[~2021-08-03 19:46 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-02 18:09 [PATCH] arm64: dts: ls1046a: fix eeprom entries Raag Jadav
2021-08-02 18:09 ` Raag Jadav
2021-08-02 22:44 ` Li Yang
2021-08-02 22:44   ` Li Yang
2021-08-03 19:44   ` Raag Jadav [this message]
2021-08-03 19:44     ` Raag Jadav
2021-08-03 22:20     ` Li Yang
2021-08-03 22:20       ` Li Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210803194454.GA9471@localhost \
    --to=raagjadav@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.