All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leonardo Bras <leobras.c@gmail.com>
To: Michael Ellerman <mpe@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Leonardo Bras <leobras.c@gmail.com>,
	Alexey Kardashevskiy <aik@ozlabs.ru>,
	Frederic Barrat <fbarrat@linux.ibm.com>,
	David Gibson <david@gibson.dropbear.id.au>,
	Nicolin Chen <nicoleotsuka@gmail.com>,
	kernel test robot <lkp@intel.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 01/11] powerpc/pseries/iommu: Replace hard-coded page shift
Date: Tue, 17 Aug 2021 03:39:19 -0300	[thread overview]
Message-ID: <20210817063929.38701-2-leobras.c@gmail.com> (raw)
In-Reply-To: <20210817063929.38701-1-leobras.c@gmail.com>

Some functions assume IOMMU page size can only be 4K (pageshift == 12).
Update them to accept any page size passed, so we can use 64K pages.

In the process, some defines like TCE_SHIFT were made obsolete, and then
removed.

IODA3 Revision 3.0_prd1 (OpenPowerFoundation), Figures 3.4 and 3.5 show
a RPN of 52-bit, and considers a 12-bit pageshift, so there should be
no need of using TCE_RPN_MASK, which masks out any bit after 40 in rpn.
It's usage removed from tce_build_pSeries(), tce_build_pSeriesLP(), and
tce_buildmulti_pSeriesLP().

Most places had a tbl struct, so using tbl->it_page_shift was simple.
tce_free_pSeriesLP() was a special case, since callers not always have a
tbl struct, so adding a tceshift parameter seems the right thing to do.

Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
---
 arch/powerpc/include/asm/tce.h         |  8 ------
 arch/powerpc/platforms/pseries/iommu.c | 39 +++++++++++++++-----------
 2 files changed, 23 insertions(+), 24 deletions(-)

diff --git a/arch/powerpc/include/asm/tce.h b/arch/powerpc/include/asm/tce.h
index db5fc2f2262d..0c34d2756d92 100644
--- a/arch/powerpc/include/asm/tce.h
+++ b/arch/powerpc/include/asm/tce.h
@@ -19,15 +19,7 @@
 #define TCE_VB			0
 #define TCE_PCI			1
 
-/* TCE page size is 4096 bytes (1 << 12) */
-
-#define TCE_SHIFT	12
-#define TCE_PAGE_SIZE	(1 << TCE_SHIFT)
-
 #define TCE_ENTRY_SIZE		8		/* each TCE is 64 bits */
-
-#define TCE_RPN_MASK		0xfffffffffful  /* 40-bit RPN (4K pages) */
-#define TCE_RPN_SHIFT		12
 #define TCE_VALID		0x800		/* TCE valid */
 #define TCE_ALLIO		0x400		/* TCE valid for all lpars */
 #define TCE_PCI_WRITE		0x2		/* write from PCI allowed */
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 0c55b991f665..b1b8d12bab39 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -107,6 +107,8 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 	u64 proto_tce;
 	__be64 *tcep;
 	u64 rpn;
+	const unsigned long tceshift = tbl->it_page_shift;
+	const unsigned long pagesize = IOMMU_PAGE_SIZE(tbl);
 
 	proto_tce = TCE_PCI_READ; // Read allowed
 
@@ -117,10 +119,10 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 
 	while (npages--) {
 		/* can't move this out since we might cross MEMBLOCK boundary */
-		rpn = __pa(uaddr) >> TCE_SHIFT;
-		*tcep = cpu_to_be64(proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT);
+		rpn = __pa(uaddr) >> tceshift;
+		*tcep = cpu_to_be64(proto_tce | rpn << tceshift);
 
-		uaddr += TCE_PAGE_SIZE;
+		uaddr += pagesize;
 		tcep++;
 	}
 	return 0;
@@ -146,7 +148,7 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
 	return be64_to_cpu(*tcep);
 }
 
-static void tce_free_pSeriesLP(unsigned long liobn, long, long);
+static void tce_free_pSeriesLP(unsigned long liobn, long, long, long);
 static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long);
 
 static int tce_build_pSeriesLP(unsigned long liobn, long tcenum, long tceshift,
@@ -166,12 +168,12 @@ static int tce_build_pSeriesLP(unsigned long liobn, long tcenum, long tceshift,
 		proto_tce |= TCE_PCI_WRITE;
 
 	while (npages--) {
-		tce = proto_tce | (rpn & TCE_RPN_MASK) << tceshift;
+		tce = proto_tce | rpn << tceshift;
 		rc = plpar_tce_put((u64)liobn, (u64)tcenum << tceshift, tce);
 
 		if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
 			ret = (int)rc;
-			tce_free_pSeriesLP(liobn, tcenum_start,
+			tce_free_pSeriesLP(liobn, tcenum_start, tceshift,
 			                   (npages_start - (npages + 1)));
 			break;
 		}
@@ -205,10 +207,11 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	long tcenum_start = tcenum, npages_start = npages;
 	int ret = 0;
 	unsigned long flags;
+	const unsigned long tceshift = tbl->it_page_shift;
 
 	if ((npages == 1) || !firmware_has_feature(FW_FEATURE_PUT_TCE_IND)) {
 		return tce_build_pSeriesLP(tbl->it_index, tcenum,
-					   tbl->it_page_shift, npages, uaddr,
+					   tceshift, npages, uaddr,
 		                           direction, attrs);
 	}
 
@@ -225,13 +228,13 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		if (!tcep) {
 			local_irq_restore(flags);
 			return tce_build_pSeriesLP(tbl->it_index, tcenum,
-					tbl->it_page_shift,
+					tceshift,
 					npages, uaddr, direction, attrs);
 		}
 		__this_cpu_write(tce_page, tcep);
 	}
 
-	rpn = __pa(uaddr) >> TCE_SHIFT;
+	rpn = __pa(uaddr) >> tceshift;
 	proto_tce = TCE_PCI_READ;
 	if (direction != DMA_TO_DEVICE)
 		proto_tce |= TCE_PCI_WRITE;
@@ -245,12 +248,12 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		limit = min_t(long, npages, 4096/TCE_ENTRY_SIZE);
 
 		for (l = 0; l < limit; l++) {
-			tcep[l] = cpu_to_be64(proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT);
+			tcep[l] = cpu_to_be64(proto_tce | rpn << tceshift);
 			rpn++;
 		}
 
 		rc = plpar_tce_put_indirect((u64)tbl->it_index,
-					    (u64)tcenum << 12,
+					    (u64)tcenum << tceshift,
 					    (u64)__pa(tcep),
 					    limit);
 
@@ -277,12 +280,13 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	return ret;
 }
 
-static void tce_free_pSeriesLP(unsigned long liobn, long tcenum, long npages)
+static void tce_free_pSeriesLP(unsigned long liobn, long tcenum, long tceshift,
+			       long npages)
 {
 	u64 rc;
 
 	while (npages--) {
-		rc = plpar_tce_put((u64)liobn, (u64)tcenum << 12, 0);
+		rc = plpar_tce_put((u64)liobn, (u64)tcenum << tceshift, 0);
 
 		if (rc && printk_ratelimit()) {
 			printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
@@ -301,9 +305,11 @@ static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long n
 	u64 rc;
 
 	if (!firmware_has_feature(FW_FEATURE_STUFF_TCE))
-		return tce_free_pSeriesLP(tbl->it_index, tcenum, npages);
+		return tce_free_pSeriesLP(tbl->it_index, tcenum,
+					  tbl->it_page_shift, npages);
 
-	rc = plpar_tce_stuff((u64)tbl->it_index, (u64)tcenum << 12, 0, npages);
+	rc = plpar_tce_stuff((u64)tbl->it_index,
+			     (u64)tcenum << tbl->it_page_shift, 0, npages);
 
 	if (rc && printk_ratelimit()) {
 		printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n");
@@ -319,7 +325,8 @@ static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum)
 	u64 rc;
 	unsigned long tce_ret;
 
-	rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret);
+	rc = plpar_tce_get((u64)tbl->it_index,
+			   (u64)tcenum << tbl->it_page_shift, &tce_ret);
 
 	if (rc && printk_ratelimit()) {
 		printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc);
-- 
2.32.0


  reply	other threads:[~2021-08-17  6:41 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-17  6:39 [PATCH v6 00/11] DDW + Indirect Mapping Leonardo Bras
2021-08-17  6:39 ` Leonardo Bras [this message]
2021-08-17  6:39 ` [PATCH v6 02/11] powerpc/kernel/iommu: Add new iommu_table_in_use() helper Leonardo Bras
2021-08-27 16:52   ` Frederic Barrat
2021-08-17  6:39 ` [PATCH v6 03/11] powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper Leonardo Bras
2021-08-17  6:39 ` [PATCH v6 04/11] powerpc/pseries/iommu: Add ddw_list_new_entry() helper Leonardo Bras
2021-08-17  6:39 ` [PATCH v6 05/11] powerpc/pseries/iommu: Allow DDW windows starting at 0x00 Leonardo Bras
2021-08-17  6:39 ` [PATCH v6 06/11] powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw() Leonardo Bras
2021-08-27 16:55   ` Frederic Barrat
2021-08-17  6:39 ` [PATCH v6 07/11] powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper Leonardo Bras
2021-08-17  6:39 ` [PATCH v6 08/11] powerpc/pseries/iommu: Update remove_dma_window() to accept property name Leonardo Bras
2021-08-27 16:58   ` Frederic Barrat
2021-08-17  6:39 ` [PATCH v6 09/11] powerpc/pseries/iommu: Find existing DDW with given " Leonardo Bras
2021-08-17  6:39 ` [PATCH v6 10/11] powerpc/pseries/iommu: Make use of DDW for indirect mapping Leonardo Bras
2021-08-27 17:06   ` Frederic Barrat
2021-08-27 17:53     ` Leonardo Brás
2021-08-17  6:39 ` [PATCH v6 11/11] powerpc/pseries/iommu: Rename "direct window" to "dma window" Leonardo Bras
2021-08-30 17:48 ` [PATCH v6 00/11] DDW + Indirect Mapping David Christensen
2021-08-31 20:18   ` Leonardo Brás
2021-08-31 20:39     ` David Christensen
2021-08-31 20:49       ` Leonardo Brás
2021-08-31 13:56 ` Michael Ellerman
2021-08-31 13:56   ` Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210817063929.38701-2-leobras.c@gmail.com \
    --to=leobras.c@gmail.com \
    --cc=aik@ozlabs.ru \
    --cc=benh@kernel.crashing.org \
    --cc=david@gibson.dropbear.id.au \
    --cc=fbarrat@linux.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=lkp@intel.com \
    --cc=mpe@ellerman.id.au \
    --cc=nicoleotsuka@gmail.com \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.