All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leonardo Bras <leobras.c@gmail.com>
To: Michael Ellerman <mpe@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Leonardo Bras <leobras.c@gmail.com>,
	Alexey Kardashevskiy <aik@ozlabs.ru>,
	Frederic Barrat <fbarrat@linux.ibm.com>,
	David Gibson <david@gibson.dropbear.id.au>,
	Nicolin Chen <nicoleotsuka@gmail.com>,
	kernel test robot <lkp@intel.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 05/11] powerpc/pseries/iommu: Allow DDW windows starting at 0x00
Date: Tue, 17 Aug 2021 03:39:23 -0300	[thread overview]
Message-ID: <20210817063929.38701-6-leobras.c@gmail.com> (raw)
In-Reply-To: <20210817063929.38701-1-leobras.c@gmail.com>

enable_ddw() currently returns the address of the DMA window, which is
considered invalid if has the value 0x00.

Also, it only considers valid an address returned from find_existing_ddw
if it's not 0x00.

Changing this behavior makes sense, given the users of enable_ddw() only
need to know if direct mapping is possible. It can also allow a DMA window
starting at 0x00 to be used.

This will be helpful for using a DDW with indirect mapping, as the window
address will be different than 0x00, but it will not map the whole
partition.

Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
---
 arch/powerpc/platforms/pseries/iommu.c | 36 +++++++++++++-------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 712d1667144a..b34b473bbdc1 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -853,25 +853,26 @@ static void remove_ddw(struct device_node *np, bool remove_prop)
 			np, ret);
 }
 
-static u64 find_existing_ddw(struct device_node *pdn, int *window_shift)
+static bool find_existing_ddw(struct device_node *pdn, u64 *dma_addr, int *window_shift)
 {
 	struct direct_window *window;
 	const struct dynamic_dma_window_prop *direct64;
-	u64 dma_addr = 0;
+	bool found = false;
 
 	spin_lock(&direct_window_list_lock);
 	/* check if we already created a window and dupe that config if so */
 	list_for_each_entry(window, &direct_window_list, list) {
 		if (window->device == pdn) {
 			direct64 = window->prop;
-			dma_addr = be64_to_cpu(direct64->dma_base);
+			*dma_addr = be64_to_cpu(direct64->dma_base);
 			*window_shift = be32_to_cpu(direct64->window_shift);
+			found = true;
 			break;
 		}
 	}
 	spin_unlock(&direct_window_list_lock);
 
-	return dma_addr;
+	return found;
 }
 
 static struct direct_window *ddw_list_new_entry(struct device_node *pdn,
@@ -1161,20 +1162,20 @@ static int iommu_get_page_shift(u32 query_page_size)
  * pdn: the parent pe node with the ibm,dma_window property
  * Future: also check if we can remap the base window for our base page size
  *
- * returns the dma offset for use by the direct mapped DMA code.
+ * returns true if can map all pages (direct mapping), false otherwise..
  */
-static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
+static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 {
 	int len = 0, ret;
 	int max_ram_len = order_base_2(ddw_memory_hotplug_max());
 	struct ddw_query_response query;
 	struct ddw_create_response create;
 	int page_shift;
-	u64 dma_addr;
 	struct device_node *dn;
 	u32 ddw_avail[DDW_APPLICABLE_SIZE];
 	struct direct_window *window;
 	struct property *win64;
+	bool ddw_enabled = false;
 	struct dynamic_dma_window_prop *ddwprop;
 	struct failed_ddw_pdn *fpdn;
 	bool default_win_removed = false;
@@ -1186,9 +1187,10 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 
 	mutex_lock(&direct_window_init_mutex);
 
-	dma_addr = find_existing_ddw(pdn, &len);
-	if (dma_addr != 0)
+	if (find_existing_ddw(pdn, &dev->dev.archdata.dma_offset, &len)) {
+		ddw_enabled = true;
 		goto out_unlock;
+	}
 
 	/*
 	 * If we already went through this for a previous function of
@@ -1342,7 +1344,8 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	list_add(&window->list, &direct_window_list);
 	spin_unlock(&direct_window_list_lock);
 
-	dma_addr = be64_to_cpu(ddwprop->dma_base);
+	dev->dev.archdata.dma_offset = be64_to_cpu(ddwprop->dma_base);
+	ddw_enabled = true;
 	goto out_unlock;
 
 out_free_window:
@@ -1374,10 +1377,10 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	 * as RAM, then we failed to create a window to cover persistent
 	 * memory and need to set the DMA limit.
 	 */
-	if (pmem_present && dma_addr && (len == max_ram_len))
-		dev->dev.bus_dma_limit = dma_addr + (1ULL << len);
+	if (pmem_present && ddw_enabled && (len == max_ram_len))
+		dev->dev.bus_dma_limit = dev->dev.archdata.dma_offset + (1ULL << len);
 
-	return dma_addr;
+	return ddw_enabled;
 }
 
 static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
@@ -1456,11 +1459,8 @@ static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask)
 			break;
 	}
 
-	if (pdn && PCI_DN(pdn)) {
-		pdev->dev.archdata.dma_offset = enable_ddw(pdev, pdn);
-		if (pdev->dev.archdata.dma_offset)
-			return true;
-	}
+	if (pdn && PCI_DN(pdn))
+		return enable_ddw(pdev, pdn);
 
 	return false;
 }
-- 
2.32.0


  parent reply	other threads:[~2021-08-17  6:44 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-17  6:39 [PATCH v6 00/11] DDW + Indirect Mapping Leonardo Bras
2021-08-17  6:39 ` [PATCH v6 01/11] powerpc/pseries/iommu: Replace hard-coded page shift Leonardo Bras
2021-08-17  6:39 ` [PATCH v6 02/11] powerpc/kernel/iommu: Add new iommu_table_in_use() helper Leonardo Bras
2021-08-27 16:52   ` Frederic Barrat
2021-08-17  6:39 ` [PATCH v6 03/11] powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper Leonardo Bras
2021-08-17  6:39 ` [PATCH v6 04/11] powerpc/pseries/iommu: Add ddw_list_new_entry() helper Leonardo Bras
2021-08-17  6:39 ` Leonardo Bras [this message]
2021-08-17  6:39 ` [PATCH v6 06/11] powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw() Leonardo Bras
2021-08-27 16:55   ` Frederic Barrat
2021-08-17  6:39 ` [PATCH v6 07/11] powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper Leonardo Bras
2021-08-17  6:39 ` [PATCH v6 08/11] powerpc/pseries/iommu: Update remove_dma_window() to accept property name Leonardo Bras
2021-08-27 16:58   ` Frederic Barrat
2021-08-17  6:39 ` [PATCH v6 09/11] powerpc/pseries/iommu: Find existing DDW with given " Leonardo Bras
2021-08-17  6:39 ` [PATCH v6 10/11] powerpc/pseries/iommu: Make use of DDW for indirect mapping Leonardo Bras
2021-08-27 17:06   ` Frederic Barrat
2021-08-27 17:53     ` Leonardo Brás
2021-08-17  6:39 ` [PATCH v6 11/11] powerpc/pseries/iommu: Rename "direct window" to "dma window" Leonardo Bras
2021-08-30 17:48 ` [PATCH v6 00/11] DDW + Indirect Mapping David Christensen
2021-08-31 20:18   ` Leonardo Brás
2021-08-31 20:39     ` David Christensen
2021-08-31 20:49       ` Leonardo Brás
2021-08-31 13:56 ` Michael Ellerman
2021-08-31 13:56   ` Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210817063929.38701-6-leobras.c@gmail.com \
    --to=leobras.c@gmail.com \
    --cc=aik@ozlabs.ru \
    --cc=benh@kernel.crashing.org \
    --cc=david@gibson.dropbear.id.au \
    --cc=fbarrat@linux.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=lkp@intel.com \
    --cc=mpe@ellerman.id.au \
    --cc=nicoleotsuka@gmail.com \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.