From: Matthew Hagan <mnhagan88@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Matthew Hagan <mnhagan88@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/5] ARM: dts: NSP: Fix mpcore, mmc node names
Date: Sat, 28 Aug 2021 11:27:00 +0000 [thread overview]
Message-ID: <20210828112704.2283805-2-mnhagan88@gmail.com> (raw)
In-Reply-To: <20210828112704.2283805-1-mnhagan88@gmail.com>
This fixes the following message by appending "-bus" to mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Secondly this fixes the mmc node name. Leave the label name as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 745d1d9d7414..6f2ccd059e73 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@ pmu {
interrupt-affinity = <&cpu0>, <&cpu1>;
};
- mpcore@19000000 {
+ mpcore-bus@19000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
@@ -219,7 +219,7 @@ dma: dma@20000 {
status = "disabled";
};
- sdio: sdhci@21000 {
+ sdio: mmc@21000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x21000 0x100>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Matthew Hagan <mnhagan88@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Matthew Hagan <mnhagan88@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/5] ARM: dts: NSP: Fix mpcore, mmc node names
Date: Sat, 28 Aug 2021 11:27:00 +0000 [thread overview]
Message-ID: <20210828112704.2283805-2-mnhagan88@gmail.com> (raw)
In-Reply-To: <20210828112704.2283805-1-mnhagan88@gmail.com>
This fixes the following message by appending "-bus" to mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Secondly this fixes the mmc node name. Leave the label name as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 745d1d9d7414..6f2ccd059e73 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@ pmu {
interrupt-affinity = <&cpu0>, <&cpu1>;
};
- mpcore@19000000 {
+ mpcore-bus@19000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
@@ -219,7 +219,7 @@ dma: dma@20000 {
status = "disabled";
};
- sdio: sdhci@21000 {
+ sdio: mmc@21000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x21000 0x100>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
--
2.27.0
next prev parent reply other threads:[~2021-08-28 11:30 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-28 11:26 [PATCH 1/5] ARM: dts: NSP: Add bcm958623hr board name to dts Matthew Hagan
2021-08-28 11:26 ` Matthew Hagan
2021-08-28 11:27 ` Matthew Hagan [this message]
2021-08-28 11:27 ` [PATCH 2/5] ARM: dts: NSP: Fix mpcore, mmc node names Matthew Hagan
2021-08-28 11:27 ` [PATCH 3/5] ARM: dts: NSP: Fix MDIO mux " Matthew Hagan
2021-08-28 11:27 ` Matthew Hagan
2021-08-28 17:07 ` Andrew Lunn
2021-08-28 17:07 ` Andrew Lunn
2021-08-28 21:52 ` Matthew Hagan
2021-08-28 21:52 ` Matthew Hagan
2021-08-28 22:14 ` Andrew Lunn
2021-08-28 22:14 ` Andrew Lunn
2021-09-16 12:52 ` Andrew Lunn
2021-09-16 12:52 ` Andrew Lunn
2021-08-28 11:27 ` [PATCH 4/5] ARM: dts: NSP: Fix MX64/MX65 eeprom node name Matthew Hagan
2021-08-28 11:27 ` Matthew Hagan
2021-08-28 11:27 ` [PATCH 5/5] ARM: dts: NSP: Fix MX65 MDIO mux warnings Matthew Hagan
2021-08-28 11:27 ` Matthew Hagan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210828112704.2283805-2-mnhagan88@gmail.com \
--to=mnhagan88@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.