* [PATCH 0/4] staging: r8188eu: remove code for other chips
@ 2021-08-30 9:21 Michael Straube
2021-08-30 9:21 ` [PATCH 1/4] staging: r8188eu: remove Hal_MPT_CCKTxPowerAdjustbyIndex() Michael Straube
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Michael Straube @ 2021-08-30 9:21 UTC (permalink / raw)
To: gregkh
Cc: Larry.Finger, phil, martin, fmdefrancesco, linux-staging,
linux-kernel, Michael Straube
This series removes some code that is valid only for other chips
than RTL8188EU and is not used in the driver.
Michael Straube (4):
staging: r8188eu: remove Hal_MPT_CCKTxPowerAdjustbyIndex()
staging: r8188eu: remove set but unused variable
staging: r8188eu: remove ICType from struct HAL_VERSION
staging: r8188eu: remove unused function SetBcnCtrlReg()
drivers/staging/r8188eu/hal/hal_com.c | 13 +-
.../staging/r8188eu/hal/rtl8188e_hal_init.c | 19 ---
drivers/staging/r8188eu/hal/rtl8188e_mp.c | 139 ++----------------
drivers/staging/r8188eu/hal/usb_halinit.c | 2 +-
drivers/staging/r8188eu/include/HalVerDef.h | 61 --------
.../staging/r8188eu/include/rtl8188e_hal.h | 3 -
drivers/staging/r8188eu/include/rtw_mp.h | 1 -
7 files changed, 12 insertions(+), 226 deletions(-)
--
2.33.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/4] staging: r8188eu: remove Hal_MPT_CCKTxPowerAdjustbyIndex()
2021-08-30 9:21 [PATCH 0/4] staging: r8188eu: remove code for other chips Michael Straube
@ 2021-08-30 9:21 ` Michael Straube
2021-08-30 9:21 ` [PATCH 2/4] staging: r8188eu: remove set but unused variable Michael Straube
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Michael Straube @ 2021-08-30 9:21 UTC (permalink / raw)
To: gregkh
Cc: Larry.Finger, phil, martin, fmdefrancesco, linux-staging,
linux-kernel, Michael Straube
IC Type is always 8188E. Therefore, the test
"if (!IS_92C_SERIAL(pHalData->VersionID))" in
Hal_MPT_CCKTxPowerAdjustbyIndex() is always true and the function
does nothing, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/hal/rtl8188e_mp.c | 71 -----------------------
drivers/staging/r8188eu/include/rtw_mp.h | 1 -
2 files changed, 72 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_mp.c b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
index fc13db705511..49c672383e43 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_mp.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
@@ -130,73 +130,6 @@ void Hal_MPT_CCKTxPowerAdjust(struct adapter *Adapter, bool bInCH14)
write_bbreg(Adapter, rCCK0_TxFilter2, bMaskDWord, TempVal2);
write_bbreg(Adapter, rCCK0_DebugPort, bMaskLWord, TempVal3);
}
-
-void Hal_MPT_CCKTxPowerAdjustbyIndex(struct adapter *pAdapter, bool beven)
-{
- struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
- struct mpt_context *pMptCtx = &pAdapter->mppriv.MptCtx;
- struct odm_dm_struct *pDM_Odm = &pHalData->odmpriv;
- s32 TempCCk;
- u8 CCK_index, CCK_index_old = 0;
- u8 Action = 0; /* 0: no action, 1: even->odd, 2:odd->even */
- s32 i = 0;
-
- if (!IS_92C_SERIAL(pHalData->VersionID))
- return;
- if (beven && !pMptCtx->bMptIndexEven) {
- /* odd->even */
- Action = 2;
- pMptCtx->bMptIndexEven = true;
- } else if (!beven && pMptCtx->bMptIndexEven) {
- /* even->odd */
- Action = 1;
- pMptCtx->bMptIndexEven = false;
- }
-
- if (Action != 0) {
- /* Query CCK default setting From 0xa24 */
- TempCCk = read_bbreg(pAdapter, rCCK0_TxFilter2, bMaskDWord) & bMaskCCK;
- for (i = 0; i < CCK_TABLE_SIZE; i++) {
- if (pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
- if (!memcmp((void *)&TempCCk, (void *)&CCKSwingTable_Ch14[i][2], 4)) {
- CCK_index_old = (u8)i;
- break;
- }
- } else {
- if (!memcmp((void *)&TempCCk, (void *)&CCKSwingTable_Ch1_Ch13[i][2], 4)) {
- CCK_index_old = (u8)i;
- break;
- }
- }
- }
-
- if (Action == 1)
- CCK_index = CCK_index_old - 1;
- else
- CCK_index = CCK_index_old + 1;
-
- /* Adjust CCK according to gain index */
- if (!pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
- rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]);
- rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]);
- rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]);
- rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]);
- rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]);
- rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]);
- rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]);
- rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]);
- } else {
- rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]);
- rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]);
- rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]);
- rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]);
- rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]);
- rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]);
- rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]);
- rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]);
- }
- }
-}
/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/
/*
@@ -311,8 +244,6 @@ void Hal_SetAntennaPathPower(struct adapter *pAdapter)
case RF_8256:
case RF_6052:
Hal_SetCCKTxPower(pAdapter, TxPowerLevel);
- if (pAdapter->mppriv.rateidx < MPT_RATE_6M) /* CCK rate */
- Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath] % 2 == 0);
Hal_SetOFDMTxPower(pAdapter, TxPowerLevel);
break;
default:
@@ -350,8 +281,6 @@ void Hal_SetTxPower(struct adapter *pAdapter)
case RF_8256:
case RF_6052:
Hal_SetCCKTxPower(pAdapter, TxPowerLevel);
- if (pAdapter->mppriv.rateidx < MPT_RATE_6M) /* CCK rate */
- Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath] % 2 == 0);
Hal_SetOFDMTxPower(pAdapter, TxPowerLevel);
break;
default:
diff --git a/drivers/staging/r8188eu/include/rtw_mp.h b/drivers/staging/r8188eu/include/rtw_mp.h
index 3a259d991348..b2befe09d944 100644
--- a/drivers/staging/r8188eu/include/rtw_mp.h
+++ b/drivers/staging/r8188eu/include/rtw_mp.h
@@ -460,7 +460,6 @@ void Hal_GetPowerTracking(struct adapter *padapter, u8 * enable);
void Hal_GetThermalMeter(struct adapter *pAdapter, u8 *value);
void Hal_mpt_SwitchRfSetting(struct adapter *pAdapter);
void Hal_MPT_CCKTxPowerAdjust(struct adapter * Adapter, bool bInCH14);
-void Hal_MPT_CCKTxPowerAdjustbyIndex(struct adapter *pAdapter, bool beven);
void Hal_SetCCKTxPower(struct adapter *pAdapter, u8 * TxPower);
void Hal_SetOFDMTxPower(struct adapter *pAdapter, u8 * TxPower);
void Hal_TriggerRFThermalMeter(struct adapter *pAdapter);
--
2.33.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/4] staging: r8188eu: remove set but unused variable
2021-08-30 9:21 [PATCH 0/4] staging: r8188eu: remove code for other chips Michael Straube
2021-08-30 9:21 ` [PATCH 1/4] staging: r8188eu: remove Hal_MPT_CCKTxPowerAdjustbyIndex() Michael Straube
@ 2021-08-30 9:21 ` Michael Straube
2021-08-30 9:21 ` [PATCH 3/4] staging: r8188eu: remove ICType from struct HAL_VERSION Michael Straube
2021-08-30 9:21 ` [PATCH 4/4] staging: r8188eu: remove unused function SetBcnCtrlReg() Michael Straube
3 siblings, 0 replies; 5+ messages in thread
From: Michael Straube @ 2021-08-30 9:21 UTC (permalink / raw)
To: gregkh
Cc: Larry.Finger, phil, martin, fmdefrancesco, linux-staging,
linux-kernel, Michael Straube
The local variable rfPath in Hal_SetAntennaPathPower() and
Hal_SetTxPower() is set but not used. Remove the variable
and related code.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/hal/rtl8188e_mp.c | 29 +----------------------
1 file changed, 1 insertion(+), 28 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_mp.c b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
index 49c672383e43..ec1d7e90547e 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_mp.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
@@ -221,24 +221,10 @@ void Hal_SetAntennaPathPower(struct adapter *pAdapter)
{
struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
u8 TxPowerLevel[RF_PATH_MAX];
- u8 rfPath;
TxPowerLevel[RF_PATH_A] = pAdapter->mppriv.txpoweridx;
TxPowerLevel[RF_PATH_B] = pAdapter->mppriv.txpoweridx_b;
- switch (pAdapter->mppriv.antenna_tx) {
- case ANTENNA_A:
- default:
- rfPath = RF_PATH_A;
- break;
- case ANTENNA_B:
- rfPath = RF_PATH_B;
- break;
- case ANTENNA_C:
- rfPath = RF_PATH_C;
- break;
- }
-
switch (pHalData->rf_chip) {
case RF_8225:
case RF_8256:
@@ -256,24 +242,11 @@ void Hal_SetTxPower(struct adapter *pAdapter)
struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
u8 TxPower = pAdapter->mppriv.txpoweridx;
u8 TxPowerLevel[RF_PATH_MAX];
- u8 rf, rfPath;
+ u8 rf;
for (rf = 0; rf < RF_PATH_MAX; rf++)
TxPowerLevel[rf] = TxPower;
- switch (pAdapter->mppriv.antenna_tx) {
- case ANTENNA_A:
- default:
- rfPath = RF_PATH_A;
- break;
- case ANTENNA_B:
- rfPath = RF_PATH_B;
- break;
- case ANTENNA_C:
- rfPath = RF_PATH_C;
- break;
- }
-
switch (pHalData->rf_chip) {
/* 2008/09/12 MH Test only !! We enable the TX power tracking for MP!!!!! */
/* We should call normal driver API later!! */
--
2.33.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 3/4] staging: r8188eu: remove ICType from struct HAL_VERSION
2021-08-30 9:21 [PATCH 0/4] staging: r8188eu: remove code for other chips Michael Straube
2021-08-30 9:21 ` [PATCH 1/4] staging: r8188eu: remove Hal_MPT_CCKTxPowerAdjustbyIndex() Michael Straube
2021-08-30 9:21 ` [PATCH 2/4] staging: r8188eu: remove set but unused variable Michael Straube
@ 2021-08-30 9:21 ` Michael Straube
2021-08-30 9:21 ` [PATCH 4/4] staging: r8188eu: remove unused function SetBcnCtrlReg() Michael Straube
3 siblings, 0 replies; 5+ messages in thread
From: Michael Straube @ 2021-08-30 9:21 UTC (permalink / raw)
To: gregkh
Cc: Larry.Finger, phil, martin, fmdefrancesco, linux-staging,
linux-kernel, Michael Straube
IC type is always 8188E. Remove ICType from struct HAL_VERSION,
all macros that check it and related code.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/hal/hal_com.c | 13 +---
.../staging/r8188eu/hal/rtl8188e_hal_init.c | 1 -
drivers/staging/r8188eu/hal/rtl8188e_mp.c | 39 +++---------
drivers/staging/r8188eu/hal/usb_halinit.c | 2 +-
drivers/staging/r8188eu/include/HalVerDef.h | 61 -------------------
5 files changed, 11 insertions(+), 105 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/hal_com.c b/drivers/staging/r8188eu/hal/hal_com.c
index f09d4d49b159..eee57cbd6dd2 100644
--- a/drivers/staging/r8188eu/hal/hal_com.c
+++ b/drivers/staging/r8188eu/hal/hal_com.c
@@ -15,18 +15,7 @@ void dump_chip_info(struct HAL_VERSION chip_vers)
uint cnt = 0;
char buf[128];
- if (IS_81XXC(chip_vers)) {
- cnt += sprintf((buf + cnt), "Chip Version Info: %s_",
- IS_92C_SERIAL(chip_vers) ?
- "CHIP_8192C" : "CHIP_8188C");
- } else if (IS_92D(chip_vers)) {
- cnt += sprintf((buf + cnt), "Chip Version Info: CHIP_8192D_");
- } else if (IS_8723_SERIES(chip_vers)) {
- cnt += sprintf((buf + cnt), "Chip Version Info: CHIP_8723A_");
- } else if (IS_8188E(chip_vers)) {
- cnt += sprintf((buf + cnt), "Chip Version Info: CHIP_8188E_");
- }
-
+ cnt += sprintf((buf + cnt), "Chip Version Info: CHIP_8188E_");
cnt += sprintf((buf + cnt), "%s_", IS_NORMAL_CHIP(chip_vers) ?
"Normal_Chip" : "Test_Chip");
cnt += sprintf((buf + cnt), "%s_", IS_CHIP_VENDOR_TSMC(chip_vers) ?
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
index 14758361960c..3da5c27b6805 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
@@ -1698,7 +1698,6 @@ static struct HAL_VERSION ReadChipVersion8188E(struct adapter *padapter)
pHalData = GET_HAL_DATA(padapter);
value32 = rtw_read32(padapter, REG_SYS_CFG);
- ChipVersion.ICType = CHIP_8188E;
ChipVersion.ChipType = ((value32 & RTL_ID) ? TEST_CHIP : NORMAL_CHIP);
ChipVersion.RFType = RF_TYPE_1T1R;
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_mp.c b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
index ec1d7e90547e..ee0c96890cf3 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_mp.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
@@ -487,9 +487,6 @@ void Hal_SetSingleCarrierTx(struct adapter *pAdapter, u8 bStart)
void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
{
- struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
- bool is92C = IS_92C_SERIAL(pHalData->VersionID);
-
u8 rfPath;
u32 reg58 = 0x0;
switch (pAdapter->mppriv.antenna_tx) {
@@ -518,21 +515,10 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0);
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0);
- if (is92C) {
- _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT(19), 0x01);
- rtw_usleep_os(100);
- if (rfPath == RF_PATH_A)
- write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x10000); /* PAD all on. */
- else if (rfPath == RF_PATH_B)
- write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x10000); /* PAD all on. */
- write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */
- rtw_usleep_os(100);
- } else {
- write_rfreg(pAdapter, rfPath, 0x21, 0xd4000);
- rtw_usleep_os(100);
- write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */
- rtw_usleep_os(100);
- }
+ write_rfreg(pAdapter, rfPath, 0x21, 0xd4000);
+ rtw_usleep_os(100);
+ write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */
+ rtw_usleep_os(100);
/* for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
@@ -549,18 +535,11 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
}
write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1);
write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
- if (is92C) {
- _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT(19), 0x00);
- rtw_usleep_os(100);
- write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x32d75); /* PAD all on. */
- write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x32d75); /* PAD all on. */
- rtw_usleep_os(100);
- } else {
- write_rfreg(pAdapter, rfPath, 0x21, 0x54000);
- rtw_usleep_os(100);
- write_rfreg(pAdapter, rfPath, 0x00, 0x30000); /* PAD all on. */
- rtw_usleep_os(100);
- }
+
+ write_rfreg(pAdapter, rfPath, 0x21, 0x54000);
+ rtw_usleep_os(100);
+ write_rfreg(pAdapter, rfPath, 0x00, 0x30000); /* PAD all on. */
+ rtw_usleep_os(100);
/* Stop for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
diff --git a/drivers/staging/r8188eu/hal/usb_halinit.c b/drivers/staging/r8188eu/hal/usb_halinit.c
index 5cdabf43d4fd..147c51255878 100644
--- a/drivers/staging/r8188eu/hal/usb_halinit.c
+++ b/drivers/staging/r8188eu/hal/usb_halinit.c
@@ -1765,7 +1765,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
/* Forece leave RF low power mode for 1T1R to prevent conficting setting in Fw power */
/* saving sequence. 2010.06.07. Added by tynli. Suggested by SD3 yschang. */
- if ((psmode != PS_MODE_ACTIVE) && (!IS_92C_SERIAL(haldata->VersionID)))
+ if (psmode != PS_MODE_ACTIVE)
ODM_RF_Saving(podmpriv, true);
rtl8188e_set_FwPwrMode_cmd(Adapter, psmode);
}
diff --git a/drivers/staging/r8188eu/include/HalVerDef.h b/drivers/staging/r8188eu/include/HalVerDef.h
index a0f5bf52e75a..3a687f7c5b82 100644
--- a/drivers/staging/r8188eu/include/HalVerDef.h
+++ b/drivers/staging/r8188eu/include/HalVerDef.h
@@ -3,20 +3,6 @@
#ifndef __HAL_VERSION_DEF_H__
#define __HAL_VERSION_DEF_H__
-enum HAL_IC_TYPE {
- CHIP_8192S = 0,
- CHIP_8188C = 1,
- CHIP_8192C = 2,
- CHIP_8192D = 3,
- CHIP_8723A = 4,
- CHIP_8188E = 5,
- CHIP_8881A = 6,
- CHIP_8812A = 7,
- CHIP_8821A = 8,
- CHIP_8723B = 9,
- CHIP_8192E = 10,
-};
-
enum HAL_CHIP_TYPE {
TEST_CHIP = 0,
NORMAL_CHIP = 1,
@@ -50,7 +36,6 @@ enum HAL_RF_TYPE {
};
struct HAL_VERSION {
- enum HAL_IC_TYPE ICType;
enum HAL_CHIP_TYPE ChipType;
enum HAL_CUT_VERSION CUTVersion;
enum HAL_VENDOR VendorType;
@@ -59,7 +44,6 @@ struct HAL_VERSION {
};
/* Get element */
-#define GET_CVID_IC_TYPE(version) (((version).ICType))
#define GET_CVID_CHIP_TYPE(version) (((version).ChipType))
#define GET_CVID_RF_TYPE(version) (((version).RFType))
#define GET_CVID_MANUFACTUER(version) (((version).VendorType))
@@ -69,17 +53,6 @@ struct HAL_VERSION {
/* Common Macro. -- */
/* HAL_VERSION VersionID */
-/* HAL_IC_TYPE_E */
-#define IS_81XXC(version) \
- (((GET_CVID_IC_TYPE(version) == CHIP_8192C) || \
- (GET_CVID_IC_TYPE(version) == CHIP_8188C)) ? true : false)
-#define IS_8723_SERIES(version) \
- ((GET_CVID_IC_TYPE(version) == CHIP_8723A) ? true : false)
-#define IS_92D(version) \
- ((GET_CVID_IC_TYPE(version) == CHIP_8192D) ? true : false)
-#define IS_8188E(version) \
- ((GET_CVID_IC_TYPE(version) == CHIP_8188E) ? true : false)
-
/* HAL_CHIP_TYPE_E */
#define IS_TEST_CHIP(version) \
((GET_CVID_CHIP_TYPE(version) == TEST_CHIP) ? true : false)
@@ -112,38 +85,4 @@ struct HAL_VERSION {
#define IS_2T2R(version) \
((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R) ? true : false)
-/* Chip version Macro. -- */
-#define IS_81XXC_TEST_CHIP(version) \
- ((IS_81XXC(version) && (!IS_NORMAL_CHIP(version))) ? true : false)
-
-#define IS_92C_SERIAL(version) \
- ((IS_81XXC(version) && IS_2T2R(version)) ? true : false)
-#define IS_81xxC_VENDOR_UMC_A_CUT(version) \
- (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
- (IS_A_CUT(version) ? true : false) : false) : false)
-#define IS_81xxC_VENDOR_UMC_B_CUT(version) \
- (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
- (IS_B_CUT(version) ? true : false) : false) : false)
-#define IS_81xxC_VENDOR_UMC_C_CUT(version) \
- (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
- (IS_C_CUT(version) ? true : false) : false) : false)
-
-#define IS_NORMAL_CHIP92D(version) \
- ((IS_92D(version)) ? \
- ((GET_CVID_CHIP_TYPE(version) == NORMAL_CHIP) ? true : false) : false)
-
-#define IS_92D_SINGLEPHY(version) \
- ((IS_92D(version)) ? (IS_2T2R(version) ? true : false) : false)
-#define IS_92D_C_CUT(version) \
- ((IS_92D(version)) ? (IS_C_CUT(version) ? true : false) : false)
-#define IS_92D_D_CUT(version) \
- ((IS_92D(version)) ? (IS_D_CUT(version) ? true : false) : false)
-#define IS_92D_E_CUT(version) \
- ((IS_92D(version)) ? (IS_E_CUT(version) ? true : false) : false)
-
-#define IS_8723A_A_CUT(version) \
- ((IS_8723_SERIES(version)) ? (IS_A_CUT(version) ? true : false) : false)
-#define IS_8723A_B_CUT(version) \
- ((IS_8723_SERIES(version)) ? (IS_B_CUT(version) ? true : false) : false)
-
#endif
--
2.33.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 4/4] staging: r8188eu: remove unused function SetBcnCtrlReg()
2021-08-30 9:21 [PATCH 0/4] staging: r8188eu: remove code for other chips Michael Straube
` (2 preceding siblings ...)
2021-08-30 9:21 ` [PATCH 3/4] staging: r8188eu: remove ICType from struct HAL_VERSION Michael Straube
@ 2021-08-30 9:21 ` Michael Straube
3 siblings, 0 replies; 5+ messages in thread
From: Michael Straube @ 2021-08-30 9:21 UTC (permalink / raw)
To: gregkh
Cc: Larry.Finger, phil, martin, fmdefrancesco, linux-staging,
linux-kernel, Michael Straube
Remove unused function SetBcnCtrlReg().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
.../staging/r8188eu/hal/rtl8188e_hal_init.c | 18 ------------------
drivers/staging/r8188eu/include/rtl8188e_hal.h | 3 ---
2 files changed, 21 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
index 3da5c27b6805..1adaf472a116 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
@@ -2283,21 +2283,3 @@ bool HalDetectPwrDownMode88E(struct adapter *Adapter)
return pHalData->pwrdown;
} /* HalDetectPwrDownMode */
-
-/* This function is used only for 92C to set REG_BCN_CTRL(0x550) register. */
-/* We just reserve the value of the register in variable pHalData->RegBcnCtrlVal and then operate */
-/* the value of the register via atomic operation. */
-/* This prevents from race condition when setting this register. */
-/* The value of pHalData->RegBcnCtrlVal is initialized in HwConfigureRTL8192CE() function. */
-
-void SetBcnCtrlReg(struct adapter *padapter, u8 SetBits, u8 ClearBits)
-{
- struct hal_data_8188e *pHalData;
-
- pHalData = GET_HAL_DATA(padapter);
-
- pHalData->RegBcnCtrlVal |= SetBits;
- pHalData->RegBcnCtrlVal &= ~ClearBits;
-
- rtw_write8(padapter, REG_BCN_CTRL, (u8)pHalData->RegBcnCtrlVal);
-}
diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index 3939bf053de1..103991b6ec82 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -437,9 +437,6 @@ bool HalDetectPwrDownMode88E(struct adapter *Adapter);
void Hal_InitChannelPlan(struct adapter *padapter);
void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc);
-/* register */
-void SetBcnCtrlReg(struct adapter *padapter, u8 SetBits, u8 ClearBits);
-
void rtl8188e_clone_haldata(struct adapter *dst, struct adapter *src);
void rtl8188e_start_thread(struct adapter *padapter);
void rtl8188e_stop_thread(struct adapter *padapter);
--
2.33.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-08-30 9:22 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-08-30 9:21 [PATCH 0/4] staging: r8188eu: remove code for other chips Michael Straube
2021-08-30 9:21 ` [PATCH 1/4] staging: r8188eu: remove Hal_MPT_CCKTxPowerAdjustbyIndex() Michael Straube
2021-08-30 9:21 ` [PATCH 2/4] staging: r8188eu: remove set but unused variable Michael Straube
2021-08-30 9:21 ` [PATCH 3/4] staging: r8188eu: remove ICType from struct HAL_VERSION Michael Straube
2021-08-30 9:21 ` [PATCH 4/4] staging: r8188eu: remove unused function SetBcnCtrlReg() Michael Straube
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.