All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
	Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] arm: dts: mt7623: add otg nodes for bpi-r2
Date: Mon, 30 Aug 2021 16:59:58 +0200	[thread overview]
Message-ID: <20210830145958.108605-1-linux@fw-web.de> (raw)

From: Frank Wunderlich <frank-w@public-files.de>

Add OTG-Nodes for BananaPi-R2

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
patch is based on

"arm: dts: mt7623: add musb device nodes"

https://patchwork.kernel.org/project/linux-mediatek/patch/20210822041333.5264-2-mans0n@gorani.run/
---
v2:
	rebase on plain 5.14, v1 was based on some not upstreamed work
---
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index e96aa0ed1ebd..027c1b0c6a98 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -366,6 +366,14 @@ &pcie1_phy {
 	status = "okay";
 };
 
+&pio {
+	musb_pins: musb {
+		pins-musb {
+			pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
+		};
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm_pins_a>;
@@ -396,6 +404,19 @@ &uart2 {
 	status = "okay";
 };
 
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	status = "okay";
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &usb1 {
 	vusb33-supply = <&reg_3p3v>;
 	vbus-supply = <&reg_5v>;
@@ -408,6 +429,10 @@ &usb2 {
 	status = "okay";
 };
 
+&u2phy1 {
+	status = "okay";
+};
+
 &u3phy1 {
 	status = "okay";
 };
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
	Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] arm: dts: mt7623: add otg nodes for bpi-r2
Date: Mon, 30 Aug 2021 16:59:58 +0200	[thread overview]
Message-ID: <20210830145958.108605-1-linux@fw-web.de> (raw)

From: Frank Wunderlich <frank-w@public-files.de>

Add OTG-Nodes for BananaPi-R2

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
patch is based on

"arm: dts: mt7623: add musb device nodes"

https://patchwork.kernel.org/project/linux-mediatek/patch/20210822041333.5264-2-mans0n@gorani.run/
---
v2:
	rebase on plain 5.14, v1 was based on some not upstreamed work
---
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index e96aa0ed1ebd..027c1b0c6a98 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -366,6 +366,14 @@ &pcie1_phy {
 	status = "okay";
 };
 
+&pio {
+	musb_pins: musb {
+		pins-musb {
+			pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
+		};
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm_pins_a>;
@@ -396,6 +404,19 @@ &uart2 {
 	status = "okay";
 };
 
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	status = "okay";
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &usb1 {
 	vusb33-supply = <&reg_3p3v>;
 	vbus-supply = <&reg_5v>;
@@ -408,6 +429,10 @@ &usb2 {
 	status = "okay";
 };
 
+&u2phy1 {
+	status = "okay";
+};
+
 &u3phy1 {
 	status = "okay";
 };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
	Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] arm: dts: mt7623: add otg nodes for bpi-r2
Date: Mon, 30 Aug 2021 16:59:58 +0200	[thread overview]
Message-ID: <20210830145958.108605-1-linux@fw-web.de> (raw)

From: Frank Wunderlich <frank-w@public-files.de>

Add OTG-Nodes for BananaPi-R2

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
patch is based on

"arm: dts: mt7623: add musb device nodes"

https://patchwork.kernel.org/project/linux-mediatek/patch/20210822041333.5264-2-mans0n@gorani.run/
---
v2:
	rebase on plain 5.14, v1 was based on some not upstreamed work
---
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index e96aa0ed1ebd..027c1b0c6a98 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -366,6 +366,14 @@ &pcie1_phy {
 	status = "okay";
 };
 
+&pio {
+	musb_pins: musb {
+		pins-musb {
+			pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
+		};
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm_pins_a>;
@@ -396,6 +404,19 @@ &uart2 {
 	status = "okay";
 };
 
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	status = "okay";
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &usb1 {
 	vusb33-supply = <&reg_3p3v>;
 	vbus-supply = <&reg_5v>;
@@ -408,6 +429,10 @@ &usb2 {
 	status = "okay";
 };
 
+&u2phy1 {
+	status = "okay";
+};
+
 &u3phy1 {
 	status = "okay";
 };
-- 
2.25.1


             reply	other threads:[~2021-08-30 15:00 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-30 14:59 Frank Wunderlich [this message]
2021-08-30 14:59 ` [PATCH v2] arm: dts: mt7623: add otg nodes for bpi-r2 Frank Wunderlich
2021-08-30 14:59 ` Frank Wunderlich
2021-08-30 23:14 ` kernel test robot
2021-09-20 12:01 ` Matthias Brugger
2021-09-20 12:01   ` Matthias Brugger
2021-09-20 12:01   ` Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210830145958.108605-1-linux@fw-web.de \
    --to=linux@fw-web.de \
    --cc=devicetree@vger.kernel.org \
    --cc=frank-w@public-files.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.