All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Lemon <jonathan.lemon@gmail.com>
To: kuba@kernel.org, davem@davemloft.net, richardcochran@gmail.com
Cc: netdev@vger.kernel.org, kernel-team@fb.com
Subject: [PATCH net-next 14/18] ptp: ocp: Add second GNSS device
Date: Tue, 14 Sep 2021 19:16:32 -0700	[thread overview]
Message-ID: <20210915021636.153754-15-jonathan.lemon@gmail.com> (raw)
In-Reply-To: <20210915021636.153754-1-jonathan.lemon@gmail.com>

Upcoming boards may have a second GNSS receiver, getting information
from a different constellation than the first receiver, which provides
some measure of anti-spoofing.

Expose the sysfs attribute for this device, if detected.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
---
 drivers/ptp/ptp_ocp.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index 74b5561fbdae..d0e3096f53f6 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -232,6 +232,7 @@ struct ptp_ocp {
 	int			id;
 	int			n_irqs;
 	int			gnss_port;
+	int			gnss2_port;
 	int			mac_port;	/* miniature atomic clock */
 	int			nmea_port;
 	u8			serial[6];
@@ -286,8 +287,8 @@ static int ptp_ocp_ts_enable(void *priv, bool enable);
  * 0: N/C
  * 1: TS0
  * 2: TS1
- * 3: GPS
- * 4: GPS2 (n/c)
+ * 3: GNSS
+ * 4: GNSS2
  * 5: MAC
  * 6: TS2
  * 7: I2C controller
@@ -384,6 +385,10 @@ static struct ocp_resource ocp_fb_resource[] = {
 		OCP_SERIAL_RESOURCE(gnss_port),
 		.offset = 0x00160000 + 0x1000, .irq_vec = 3,
 	},
+	{
+		OCP_SERIAL_RESOURCE(gnss2_port),
+		.offset = 0x00170000 + 0x1000, .irq_vec = 4,
+	},
 	{
 		OCP_SERIAL_RESOURCE(mac_port),
 		.offset = 0x00180000 + 0x1000, .irq_vec = 5,
@@ -2100,6 +2105,7 @@ ptp_ocp_device_init(struct ptp_ocp *bp, struct pci_dev *pdev)
 	bp->ptp_info = ptp_ocp_clock_info;
 	spin_lock_init(&bp->lock);
 	bp->gnss_port = -1;
+	bp->gnss2_port = -1;
 	bp->mac_port = -1;
 	bp->nmea_port = -1;
 	bp->pdev = pdev;
@@ -2163,6 +2169,10 @@ ptp_ocp_complete(struct ptp_ocp *bp)
 		sprintf(buf, "ttyS%d", bp->gnss_port);
 		ptp_ocp_link_child(bp, buf, "ttyGNSS");
 	}
+	if (bp->gnss2_port != -1) {
+		sprintf(buf, "ttyS%d", bp->gnss2_port);
+		ptp_ocp_link_child(bp, buf, "ttyGNSS2");
+	}
 	if (bp->mac_port != -1) {
 		sprintf(buf, "ttyS%d", bp->mac_port);
 		ptp_ocp_link_child(bp, buf, "ttyMAC");
@@ -2241,6 +2251,7 @@ ptp_ocp_info(struct ptp_ocp *bp)
 				 ver >> 16);
 	}
 	ptp_ocp_serial_info(dev, "GNSS", bp->gnss_port, 115200);
+	ptp_ocp_serial_info(dev, "GNSS2", bp->gnss2_port, 115200);
 	ptp_ocp_serial_info(dev, "MAC", bp->mac_port, 57600);
 	if (bp->nmea_out && bp->nmea_port != -1) {
 		int baud = -1;
@@ -2281,6 +2292,8 @@ ptp_ocp_detach(struct ptp_ocp *bp)
 		ptp_ocp_unregister_ext(bp->pps);
 	if (bp->gnss_port != -1)
 		serial8250_unregister_port(bp->gnss_port);
+	if (bp->gnss2_port != -1)
+		serial8250_unregister_port(bp->gnss2_port);
 	if (bp->mac_port != -1)
 		serial8250_unregister_port(bp->mac_port);
 	if (bp->nmea_port != -1)
-- 
2.31.1


  parent reply	other threads:[~2021-09-15  2:17 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-15  2:16 [PATCH net-next 00/18] timecard updates for v13 firmware Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 01/18] ptp: ocp: parameterize the i2c driver used Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 02/18] ptp: ocp: Parameterize the TOD information display Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 03/18] ptp: ocp: Skip I2C flash read when there is no controller Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 04/18] ptp: ocp: Skip resources with out of range irqs Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 05/18] ptp: ocp: Report error if resource registration fails Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 06/18] ptp: ocp: Add third timestamper Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 07/18] ptp: ocp: Add SMA selector and controls Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 08/18] ptp: ocp: Add IRIG-B and DCF blocks Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 09/18] ptp: ocp: Add IRIG-B output mode control Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 10/18] ptp: ocp: Add sysfs attribute utc_tai_offset Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 11/18] ptp: ocp: Separate the init and info logic Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 12/18] ptp: ocp: Add debugfs entry for timecard Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 13/18] ptp: ocp: Add NMEA output Jonathan Lemon
2021-09-15  2:16 ` Jonathan Lemon [this message]
2021-09-15  2:16 ` [PATCH net-next 15/18] ptp: ocp: Enable 4th timestamper / PPS generator Jonathan Lemon
2021-11-06 22:25   ` kernel test robot
2021-11-06 22:25     ` kernel test robot
2021-09-15  2:16 ` [PATCH net-next 16/18] ptp: ocp: Have FPGA fold in ns adjustment for adjtime Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 17/18] ptp: ocp: Add timestamp window adjustment Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 18/18] docs: ABI: Add sysfs documentation for timecard Jonathan Lemon
2021-09-15 10:30 ` [PATCH net-next 00/18] timecard updates for v13 firmware patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210915021636.153754-15-jonathan.lemon@gmail.com \
    --to=jonathan.lemon@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kernel-team@fb.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.