From: Jonathan Lemon <jonathan.lemon@gmail.com>
To: kuba@kernel.org, davem@davemloft.net, richardcochran@gmail.com
Cc: netdev@vger.kernel.org, kernel-team@fb.com
Subject: [PATCH net-next 16/18] ptp: ocp: Have FPGA fold in ns adjustment for adjtime.
Date: Tue, 14 Sep 2021 19:16:34 -0700 [thread overview]
Message-ID: <20210915021636.153754-17-jonathan.lemon@gmail.com> (raw)
In-Reply-To: <20210915021636.153754-1-jonathan.lemon@gmail.com>
The current implementation of adjtime uses gettime/settime to
perform nanosecond adjustments. This introduces addtional phase
errors due to delays.
Instead, use the FPGA's ability to just apply the nanosecond
adjustment to the clock directly.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
---
drivers/ptp/ptp_ocp.c | 40 +++++++++++++++++++++++++---------------
1 file changed, 25 insertions(+), 15 deletions(-)
diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index be8ab727a4ef..e6779a712bbb 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -594,9 +594,6 @@ ptp_ocp_settime(struct ptp_clock_info *ptp_info, const struct timespec64 *ts)
struct ptp_ocp *bp = container_of(ptp_info, struct ptp_ocp, ptp_info);
unsigned long flags;
- if (ioread32(&bp->reg->status) & OCP_STATUS_IN_SYNC)
- return 0;
-
spin_lock_irqsave(&bp->lock, flags);
__ptp_ocp_settime_locked(bp, ts);
spin_unlock_irqrestore(&bp->lock, flags);
@@ -604,26 +601,39 @@ ptp_ocp_settime(struct ptp_clock_info *ptp_info, const struct timespec64 *ts)
return 0;
}
+static void
+__ptp_ocp_adjtime_locked(struct ptp_ocp *bp, u64 adj_val)
+{
+ u32 select, ctrl;
+
+ select = ioread32(&bp->reg->select);
+ iowrite32(OCP_SELECT_CLK_REG, &bp->reg->select);
+
+ iowrite32(adj_val, &bp->reg->offset_ns);
+ iowrite32(adj_val & 0x7f, &bp->reg->offset_window_ns);
+
+ ctrl = OCP_CTRL_ADJUST_OFFSET | OCP_CTRL_ENABLE;
+ iowrite32(ctrl, &bp->reg->ctrl);
+
+ /* restore clock selection */
+ iowrite32(select >> 16, &bp->reg->select);
+}
+
static int
ptp_ocp_adjtime(struct ptp_clock_info *ptp_info, s64 delta_ns)
{
struct ptp_ocp *bp = container_of(ptp_info, struct ptp_ocp, ptp_info);
- struct timespec64 ts;
unsigned long flags;
- int err;
+ u32 adj_ns, sign;
- if (ioread32(&bp->reg->status) & OCP_STATUS_IN_SYNC)
- return 0;
+ sign = delta_ns < 0 ? BIT(31) : 0;
+ adj_ns = sign ? -delta_ns : delta_ns;
spin_lock_irqsave(&bp->lock, flags);
- err = __ptp_ocp_gettime_locked(bp, &ts, NULL);
- if (likely(!err)) {
- timespec64_add_ns(&ts, delta_ns);
- __ptp_ocp_settime_locked(bp, &ts);
- }
+ __ptp_ocp_adjtime_locked(bp, sign | adj_ns);
spin_unlock_irqrestore(&bp->lock, flags);
- return err;
+ return 0;
}
static int
@@ -636,7 +646,7 @@ ptp_ocp_null_adjfine(struct ptp_clock_info *ptp_info, long scaled_ppm)
}
static int
-ptp_ocp_adjphase(struct ptp_clock_info *ptp_info, s32 phase_ns)
+ptp_ocp_null_adjphase(struct ptp_clock_info *ptp_info, s32 phase_ns)
{
return -EOPNOTSUPP;
}
@@ -699,7 +709,7 @@ static const struct ptp_clock_info ptp_ocp_clock_info = {
.settime64 = ptp_ocp_settime,
.adjtime = ptp_ocp_adjtime,
.adjfine = ptp_ocp_null_adjfine,
- .adjphase = ptp_ocp_adjphase,
+ .adjphase = ptp_ocp_null_adjphase,
.enable = ptp_ocp_enable,
.pps = true,
.n_ext_ts = 4,
--
2.31.1
next prev parent reply other threads:[~2021-09-15 2:17 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-15 2:16 [PATCH net-next 00/18] timecard updates for v13 firmware Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 01/18] ptp: ocp: parameterize the i2c driver used Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 02/18] ptp: ocp: Parameterize the TOD information display Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 03/18] ptp: ocp: Skip I2C flash read when there is no controller Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 04/18] ptp: ocp: Skip resources with out of range irqs Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 05/18] ptp: ocp: Report error if resource registration fails Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 06/18] ptp: ocp: Add third timestamper Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 07/18] ptp: ocp: Add SMA selector and controls Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 08/18] ptp: ocp: Add IRIG-B and DCF blocks Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 09/18] ptp: ocp: Add IRIG-B output mode control Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 10/18] ptp: ocp: Add sysfs attribute utc_tai_offset Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 11/18] ptp: ocp: Separate the init and info logic Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 12/18] ptp: ocp: Add debugfs entry for timecard Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 13/18] ptp: ocp: Add NMEA output Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 14/18] ptp: ocp: Add second GNSS device Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 15/18] ptp: ocp: Enable 4th timestamper / PPS generator Jonathan Lemon
2021-11-06 22:25 ` kernel test robot
2021-11-06 22:25 ` kernel test robot
2021-09-15 2:16 ` Jonathan Lemon [this message]
2021-09-15 2:16 ` [PATCH net-next 17/18] ptp: ocp: Add timestamp window adjustment Jonathan Lemon
2021-09-15 2:16 ` [PATCH net-next 18/18] docs: ABI: Add sysfs documentation for timecard Jonathan Lemon
2021-09-15 10:30 ` [PATCH net-next 00/18] timecard updates for v13 firmware patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210915021636.153754-17-jonathan.lemon@gmail.com \
--to=jonathan.lemon@gmail.com \
--cc=davem@davemloft.net \
--cc=kernel-team@fb.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.