All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: mdalam@codeaurora.org
Cc: mani@kernel.org, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org, sricharan@codeaurora.org
Subject: Re: [PATCH 3/3] mtd: rawnand: qcom: Add support for page scope read
Date: Tue, 28 Sep 2021 14:54:40 +0200	[thread overview]
Message-ID: <20210928145440.758ead6b@xps13> (raw)
In-Reply-To: <8765976685ca3a04af1c102a69c9ca63@codeaurora.org>

Hello,

mdalam@codeaurora.org wrote on Tue, 28 Sep 2021 17:51:00 +0530:

> On 2021-09-15 15:27, Md Sadre Alam wrote:
> > QPIC V2.0 onwards QPIC controller support enhanced read mode
> > like page scope read and multi page read.
> > 
> > In QPIC V1, SW is needed to write EXEC_CMD register for each

                the driver needs to (same below)

> > Code word and collect any Status related to that CW before
> > issueing EXEC_CMD for next CW.
> > 
> > Page scope command is truly a page mode command where SW is
> > required to issue EXEC_CMD only once for a page. Controller
> > HW takes care of Codeword specific details and automatically
> > returns status associated with each CW to BAM pipe, dedicated
> > for status deposition.
> > 
> > With this command, SW now can issue one read command for a page
> > and upon receiving completion interrupt, can process status,
> > that have already been deposited in memory through status BAM pipe.
> > 
> > Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
> > ---
> >  drivers/mtd/nand/raw/qcom_nandc.c | 77 > ++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 71 insertions(+), 6 deletions(-)
> > 

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: mdalam@codeaurora.org
Cc: mani@kernel.org, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org, sricharan@codeaurora.org
Subject: Re: [PATCH 3/3] mtd: rawnand: qcom: Add support for page scope read
Date: Tue, 28 Sep 2021 14:54:40 +0200	[thread overview]
Message-ID: <20210928145440.758ead6b@xps13> (raw)
In-Reply-To: <8765976685ca3a04af1c102a69c9ca63@codeaurora.org>

Hello,

mdalam@codeaurora.org wrote on Tue, 28 Sep 2021 17:51:00 +0530:

> On 2021-09-15 15:27, Md Sadre Alam wrote:
> > QPIC V2.0 onwards QPIC controller support enhanced read mode
> > like page scope read and multi page read.
> > 
> > In QPIC V1, SW is needed to write EXEC_CMD register for each

                the driver needs to (same below)

> > Code word and collect any Status related to that CW before
> > issueing EXEC_CMD for next CW.
> > 
> > Page scope command is truly a page mode command where SW is
> > required to issue EXEC_CMD only once for a page. Controller
> > HW takes care of Codeword specific details and automatically
> > returns status associated with each CW to BAM pipe, dedicated
> > for status deposition.
> > 
> > With this command, SW now can issue one read command for a page
> > and upon receiving completion interrupt, can process status,
> > that have already been deposited in memory through status BAM pipe.
> > 
> > Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
> > ---
> >  drivers/mtd/nand/raw/qcom_nandc.c | 77 > ++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 71 insertions(+), 6 deletions(-)
> > 

Thanks,
Miquèl

  reply	other threads:[~2021-09-28 12:55 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-15  9:57 [PATCH 0/3] Add support for page scope read Md Sadre Alam
2021-09-15  9:57 ` Md Sadre Alam
2021-09-15  9:57 ` [PATCH 1/3] mtd: rawnand: qcom: Add support for status pipe Md Sadre Alam
2021-09-15  9:57   ` Md Sadre Alam
2021-09-28 12:17   ` mdalam
2021-09-28 12:17     ` mdalam
2021-09-28 12:46     ` Miquel Raynal
2021-09-28 12:46       ` Miquel Raynal
2021-09-28 15:52   ` Manivannan Sadhasivam
2021-09-28 15:52     ` Manivannan Sadhasivam
2021-09-15  9:57 ` [PATCH 2/3] mtd: rawnand: qcom: Add sg list to handle status pipe request Md Sadre Alam
2021-09-15  9:57   ` Md Sadre Alam
2021-09-28 12:20   ` mdalam
2021-09-28 12:20     ` mdalam
2021-09-28 12:48     ` Miquel Raynal
2021-09-28 12:48       ` Miquel Raynal
2021-09-28 16:03   ` Manivannan Sadhasivam
2021-09-28 16:03     ` Manivannan Sadhasivam
2021-09-15  9:57 ` [PATCH 3/3] mtd: rawnand: qcom: Add support for page scope read Md Sadre Alam
2021-09-15  9:57   ` Md Sadre Alam
2021-09-28 12:21   ` mdalam
2021-09-28 12:21     ` mdalam
2021-09-28 12:54     ` Miquel Raynal [this message]
2021-09-28 12:54       ` Miquel Raynal
2021-09-28 16:12   ` Manivannan Sadhasivam
2021-09-28 16:12     ` Manivannan Sadhasivam
2021-09-28 15:17 ` [PATCH 0/3] " Manivannan Sadhasivam
2021-09-28 15:17   ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210928145440.758ead6b@xps13 \
    --to=miquel.raynal@bootlin.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mani@kernel.org \
    --cc=mdalam@codeaurora.org \
    --cc=sricharan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.