All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
To: helgaas@kernel.org
Cc: "Saheed O. Bolarinwa" <refactormyself@gmail.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [RFC PATCH v3 2/3] PCI/ASPM: Remove struct pcie_link_state.acceptable
Date: Wed, 29 Sep 2021 02:41:15 +0200	[thread overview]
Message-ID: <20210929004116.20650-3-refactormyself@gmail.com> (raw)
In-Reply-To: <20210929004116.20650-1-refactormyself@gmail.com>

The acceptable latencies for each device on the bus are calculated within
pcie_aspm_cap_init() and cached in struct pcie_link_state.acceptable.
They are only used within pcie_aspm_check_latency() to validate actual
latencies. Thus, it is possible to avoid caching these values.

This patch:
 - removes `acceptable` from struct pcie_link_state
 - calculates the acceptable latency for each device directly
 - removes the calculations done within pcie_aspm_cap_init()

Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
---
 drivers/pci/pcie/aspm.c | 27 ++++++++-------------------
 1 file changed, 8 insertions(+), 19 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 9e85dfc56657..0c0c055823f1 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -65,12 +65,6 @@ struct pcie_link_state {
 	u32 clkpm_enabled:1;		/* Current Clock PM state */
 	u32 clkpm_default:1;		/* Default Clock PM state by BIOS */
 	u32 clkpm_disable:1;		/* Clock PM disabled */
-
-	/*
-	 * Endpoint acceptable latencies. A pcie downstream port only
-	 * has one slot under it, so at most there are 8 functions.
-	 */
-	struct aspm_latency acceptable[8];
 };
 
 static int aspm_disabled, aspm_force;
@@ -389,7 +383,7 @@ static struct pci_dev *pci_function_0(struct pci_bus *linkbus)
 
 static void pcie_aspm_check_latency(struct pci_dev *endpoint)
 {
-	u32 latency, lnkcap_up, lnkcap_dw, l1_switch_latency = 0;
+	u32 reg32, latency, encoding, lnkcap_up, lnkcap_dw, l1_switch_latency = 0;
 	struct pci_dev *downstream;
 	struct aspm_latency latency_up, latency_dw;
 	struct aspm_latency *acceptable;
@@ -402,7 +396,13 @@ static void pcie_aspm_check_latency(struct pci_dev *endpoint)
 
 	link = endpoint->bus->self->link_state;
 	downstream = pci_function_0(link->pdev->subordinate);
-	acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)];
+	pcie_capability_read_dword(endpoint, PCI_EXP_DEVCAP, &reg32);
+	/* Calculate endpoint L0s acceptable latency */
+	encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
+	acceptable->l0s = calc_l0s_acceptable(encoding);
+	/* Calculate endpoint L1 acceptable latency */
+	encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
+	acceptable->l1 = calc_l1_acceptable(encoding);
 
 	while (link) {
 		/* Read direction exit latencies */
@@ -664,22 +664,11 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 
 	/* Get and check endpoint acceptable latencies */
 	list_for_each_entry(child, &linkbus->devices, bus_list) {
-		u32 reg32, encoding;
-		struct aspm_latency *acceptable =
-			&link->acceptable[PCI_FUNC(child->devfn)];
 
 		if (pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT &&
 		    pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END)
 			continue;
 
-		pcie_capability_read_dword(child, PCI_EXP_DEVCAP, &reg32);
-		/* Calculate endpoint L0s acceptable latency */
-		encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
-		acceptable->l0s = calc_l0s_acceptable(encoding);
-		/* Calculate endpoint L1 acceptable latency */
-		encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
-		acceptable->l1 = calc_l1_acceptable(encoding);
-
 		pcie_aspm_check_latency(child);
 	}
 }
-- 
2.20.1


  parent reply	other threads:[~2021-09-29  0:41 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-29  0:41 [RFC PATCH v3 0/3] PCI/ASPM: Remove struct aspm_latency Saheed O. Bolarinwa
2021-09-29  0:41 ` [RFC PATCH v3 1/3] PCI/ASPM: Do not cache link latencies Saheed O. Bolarinwa
2021-09-30 23:33   ` Bjorn Helgaas
2021-09-29  0:41 ` Saheed O. Bolarinwa [this message]
2021-09-29  0:41 ` [RFC v3 PATCH 3/3] PCI/ASPM: Remove struct aspm_latency Saheed O. Bolarinwa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210929004116.20650-3-refactormyself@gmail.com \
    --to=refactormyself@gmail.com \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.