All of lore.kernel.org
 help / color / mirror / Atom feed
From: DENG Qingfang <dqfext@gmail.com>
To: Sean Wang <sean.wang@mediatek.com>,
	Landen Chao <Landen.Chao@mediatek.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: [PATCH net] net: dsa: mt7530: correct ds->num_ports
Date: Sat, 16 Oct 2021 14:24:14 +0800	[thread overview]
Message-ID: <20211016062414.783863-1-dqfext@gmail.com> (raw)

Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary
dsa_port's and call mt7530_port_disable for non-existent ports.

Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in
port_enable/disable is no longer required.

Cc: stable@vger.kernel.org
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
 drivers/net/dsa/mt7530.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a3b49abd32f1..dbd15da977b5 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1035,9 +1035,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port,
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return 0;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Allow the user port gets connected to the cpu port and also
@@ -1060,9 +1057,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Clear up all port matrix which could be restored in the next
@@ -3265,7 +3259,7 @@ mt7530_probe(struct mdio_device *mdiodev)
 		return -ENOMEM;
 
 	priv->ds->dev = &mdiodev->dev;
-	priv->ds->num_ports = DSA_MAX_PORTS;
+	priv->ds->num_ports = MT7530_NUM_PORTS;
 
 	/* Use medatek,mcm property to distinguish hardware type that would
 	 * casues a little bit differences on power-on sequence.
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: DENG Qingfang <dqfext@gmail.com>
To: Sean Wang <sean.wang@mediatek.com>,
	Landen Chao <Landen.Chao@mediatek.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: [PATCH net] net: dsa: mt7530: correct ds->num_ports
Date: Sat, 16 Oct 2021 14:24:14 +0800	[thread overview]
Message-ID: <20211016062414.783863-1-dqfext@gmail.com> (raw)

Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary
dsa_port's and call mt7530_port_disable for non-existent ports.

Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in
port_enable/disable is no longer required.

Cc: stable@vger.kernel.org
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
 drivers/net/dsa/mt7530.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a3b49abd32f1..dbd15da977b5 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1035,9 +1035,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port,
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return 0;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Allow the user port gets connected to the cpu port and also
@@ -1060,9 +1057,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Clear up all port matrix which could be restored in the next
@@ -3265,7 +3259,7 @@ mt7530_probe(struct mdio_device *mdiodev)
 		return -ENOMEM;
 
 	priv->ds->dev = &mdiodev->dev;
-	priv->ds->num_ports = DSA_MAX_PORTS;
+	priv->ds->num_ports = MT7530_NUM_PORTS;
 
 	/* Use medatek,mcm property to distinguish hardware type that would
 	 * casues a little bit differences on power-on sequence.
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: DENG Qingfang <dqfext@gmail.com>
To: Sean Wang <sean.wang@mediatek.com>,
	Landen Chao <Landen.Chao@mediatek.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: [PATCH net] net: dsa: mt7530: correct ds->num_ports
Date: Sat, 16 Oct 2021 14:24:14 +0800	[thread overview]
Message-ID: <20211016062414.783863-1-dqfext@gmail.com> (raw)

Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary
dsa_port's and call mt7530_port_disable for non-existent ports.

Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in
port_enable/disable is no longer required.

Cc: stable@vger.kernel.org
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
 drivers/net/dsa/mt7530.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a3b49abd32f1..dbd15da977b5 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1035,9 +1035,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port,
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return 0;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Allow the user port gets connected to the cpu port and also
@@ -1060,9 +1057,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Clear up all port matrix which could be restored in the next
@@ -3265,7 +3259,7 @@ mt7530_probe(struct mdio_device *mdiodev)
 		return -ENOMEM;
 
 	priv->ds->dev = &mdiodev->dev;
-	priv->ds->num_ports = DSA_MAX_PORTS;
+	priv->ds->num_ports = MT7530_NUM_PORTS;
 
 	/* Use medatek,mcm property to distinguish hardware type that would
 	 * casues a little bit differences on power-on sequence.
-- 
2.25.1


             reply	other threads:[~2021-10-16  6:24 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-16  6:24 DENG Qingfang [this message]
2021-10-16  6:24 ` [PATCH net] net: dsa: mt7530: correct ds->num_ports DENG Qingfang
2021-10-16  6:24 ` DENG Qingfang
2021-10-17  2:36 ` Florian Fainelli
2021-10-17  2:36   ` Florian Fainelli
2021-10-17  2:36   ` Florian Fainelli
2021-10-18  8:42   ` DENG Qingfang
2021-10-18  8:42     ` DENG Qingfang
2021-10-18  8:42     ` DENG Qingfang
2021-10-18 16:22     ` Florian Fainelli
2021-10-18 16:22       ` Florian Fainelli
2021-10-18 16:22       ` Florian Fainelli
2021-10-19  5:59       ` Greg KH
2021-10-19  5:59         ` Greg KH
2021-10-19  5:59         ` Greg KH
2021-10-18 12:40 ` patchwork-bot+netdevbpf
2021-10-18 12:40   ` patchwork-bot+netdevbpf
2021-10-18 12:40   ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211016062414.783863-1-dqfext@gmail.com \
    --to=dqfext@gmail.com \
    --cc=Landen.Chao@mediatek.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=sean.wang@mediatek.com \
    --cc=stable@vger.kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.