[PATCH 06/17] media: atomisp: pci: use IA_CSS_ERROR() for error messages in sh_css_mipi.c

[Tsuchiya Yuto <kitakar@gmail.com>]

Some debug messages for error cases (messages contain "error: ") use
IA_CSS_DEBUG_TRACE_PRIVATE debug level. This causes these error messages
not to appear unless users raise debug output level to 7 or higher (using
module parameter, dbg_level=7).

So, use IA_CSS_DEBUG_ERROR debug level (dbg_level=1) instead considering
that these are error messages. There is already a macro IA_CSS_ERROR()
for this use case. Let's use it. It automatically appends "error: " at
the beginning and a newline to a message. Therefore, we can remove them
from these messages.

While here, remove the unnecessary newline from one IA_CSS_ERROR()
occurrence in the same file.

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
---
 .../staging/media/atomisp/pci/sh_css_mipi.c   | 32 ++++++++-----------
 1 file changed, 13 insertions(+), 19 deletions(-)

diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.c b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
index c1f2f6151c5f..de56a1da754d 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_mipi.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
@@ -434,9 +434,8 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
 
 	if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
 	    (IS_ISP2401 && err)) {
-		ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
-				    "allocate_mipi_frames(%p) exit: error: port is not correct (port=%d).\n",
-				    pipe, port);
+		IA_CSS_ERROR("allocate_mipi_frames(%p) exit: port is not correct (port=%d).",
+			     pipe, port);
 		return -EINVAL;
 	}
 
@@ -497,9 +496,8 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
 							my_css.mipi_frames[port][j] = NULL;
 						}
 					}
-					ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
-							    "allocate_mipi_frames(%p, %d) exit: error: allocation failed.\n",
-							    pipe, port);
+					IA_CSS_ERROR("allocate_mipi_frames(%p, %d) exit: allocation failed.",
+						     pipe, port);
 					return err;
 				}
 			}
@@ -542,16 +540,14 @@ free_mipi_frames(struct ia_css_pipe *pipe)
 	if (pipe) {
 		assert(pipe->stream);
 		if ((!pipe) || (!pipe->stream)) {
-			ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
-					    "free_mipi_frames(%p) exit: error: pipe or stream is null.\n",
-					    pipe);
+			IA_CSS_ERROR("free_mipi_frames(%p) exit: pipe or stream is null.",
+				     pipe);
 			return -EINVAL;
 		}
 
 		if (!buffers_needed(pipe)) {
-			ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
-					    "free_mipi_frames(%p) exit: error: wrong mode.\n",
-					    pipe);
+			IA_CSS_ERROR("free_mipi_frames(%p) exit: wrong mode.",
+				     pipe);
 			return err;
 		}
 
@@ -566,9 +562,8 @@ free_mipi_frames(struct ia_css_pipe *pipe)
 
 		if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
 		    (IS_ISP2401 && err)) {
-			ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
-					    "free_mipi_frames(%p, %d) exit: error: pipe port is not correct.\n",
-					    pipe, port);
+			IA_CSS_ERROR("free_mipi_frames(%p, %d) exit: pipe port is not correct.",
+				     pipe, port);
 			return err;
 		}
 
@@ -576,9 +571,8 @@ free_mipi_frames(struct ia_css_pipe *pipe)
 #if !defined(ISP2401)
 			assert(ref_count_mipi_allocation[port] == 1);
 			if (ref_count_mipi_allocation[port] != 1) {
-				ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
-						    "free_mipi_frames(%p) exit: error: wrong ref_count (ref_count=%d).\n",
-						    pipe, ref_count_mipi_allocation[port]);
+				IA_CSS_ERROR("free_mipi_frames(%p) exit: wrong ref_count (ref_count=%d).",
+					     pipe, ref_count_mipi_allocation[port]);
 				return err;
 			}
 #endif
@@ -680,7 +674,7 @@ send_mipi_frames(struct ia_css_pipe *pipe)
 
 	if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
 	    (IS_ISP2401 && err)) {
-		IA_CSS_ERROR("send_mipi_frames(%p) exit: invalid port specified (port=%d).\n",
+		IA_CSS_ERROR("send_mipi_frames(%p) exit: invalid port specified (port=%d).",
 			     pipe, port);
 		return err;
 	}
-- 
2.33.1