All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: "Maíra Canal" <maira.canal@usp.br>
Cc: hongxing.zhu@nxp.com, l.stach@pengutronix.de,
	lorenzo.pieralisi@arm.com, robh@kernel.org, kw@linux.com,
	bhelgaas@google.com, shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] pci-imx6: replacing legacy gpio interface for gpiod
Date: Tue, 19 Oct 2021 14:45:45 -0500	[thread overview]
Message-ID: <20211019194545.GA2393463@bhelgaas> (raw)
In-Reply-To: <YW7jvR/2jpAwSpvd@fedora>

[fixed "linux-pci@vger.kernel.org" in cc]

On Tue, Oct 19, 2021 at 12:26:53PM -0300, Maíra Canal wrote:
> Removing all dependencies of linux/gpio.h and linux/of_gpio.h and replacing
> it with linux/gpio/consumer.h

Run "git log --oneline drivers/pci/controller/dwc/pci-imx6.c" and make
your subject line match -- capitalization, sentence structure, etc.

Write commit log in imperative mood, i.e., "Remove" instead of
"Removing": https://chris.beams.io/posts/git-commit/

The commit log mentions the trivial part but omits the important part
(converting from gpio to gpiod model).

> Signed-off-by: Maíra Canal <maira.canal@usp.br>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 31 ++++++++++-----------------
>  1 file changed, 11 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 80fc98acf097..e5ee54e37d05 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -11,13 +11,12 @@
>  #include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/kernel.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
>  #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
>  #include <linux/module.h>
> -#include <linux/of_gpio.h>
>  #include <linux/of_device.h>
>  #include <linux/of_address.h>
>  #include <linux/pci.h>
> @@ -63,7 +62,7 @@ struct imx6_pcie_drvdata {
>  
>  struct imx6_pcie {
>  	struct dw_pcie		*pci;
> -	int			reset_gpio;
> +	struct gpio_desc    *reset_gpio;
>  	bool			gpio_active_high;
>  	struct clk		*pcie_bus;
>  	struct clk		*pcie_phy;
> @@ -526,11 +525,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  	usleep_range(200, 500);
>  
>  	/* Some boards don't have PCIe reset GPIO. */
> -	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> -		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> +	if (imx6_pcie->reset_gpio) {
> +		gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
>  					imx6_pcie->gpio_active_high);
>  		msleep(100);
> -		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> +		gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
>  					!imx6_pcie->gpio_active_high);
>  	}
>  
> @@ -1025,22 +1024,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
>  		return PTR_ERR(pci->dbi_base);
>  
>  	/* Fetch GPIOs */
> -	imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
>  	imx6_pcie->gpio_active_high = of_property_read_bool(node,
>  						"reset-gpio-active-high");
> -	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> -		ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
> -				imx6_pcie->gpio_active_high ?
> -					GPIOF_OUT_INIT_HIGH :
> -					GPIOF_OUT_INIT_LOW,
> -				"PCIe reset");
> -		if (ret) {
> -			dev_err(dev, "unable to get reset gpio\n");
> -			return ret;
> -		}
> -	} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
> -		return imx6_pcie->reset_gpio;
> -	}
> +	imx6_pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> +			imx6_pcie->gpio_active_high ?  GPIOD_OUT_HIGH :
> +				GPIOD_OUT_LOW);
> +	if (IS_ERR(imx6_pcie->reset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpio),
> +					  "unable to get reset gpio\n");
>  
>  	/* Fetch clocks */
>  	imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
> -- 
> 2.31.1
> 

WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Helgaas <helgaas@kernel.org>
To: "Maíra Canal" <maira.canal@usp.br>
Cc: hongxing.zhu@nxp.com, l.stach@pengutronix.de,
	lorenzo.pieralisi@arm.com, robh@kernel.org, kw@linux.com,
	bhelgaas@google.com, shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] pci-imx6: replacing legacy gpio interface for gpiod
Date: Tue, 19 Oct 2021 14:45:45 -0500	[thread overview]
Message-ID: <20211019194545.GA2393463@bhelgaas> (raw)
In-Reply-To: <YW7jvR/2jpAwSpvd@fedora>

[fixed "linux-pci@vger.kernel.org" in cc]

On Tue, Oct 19, 2021 at 12:26:53PM -0300, Maíra Canal wrote:
> Removing all dependencies of linux/gpio.h and linux/of_gpio.h and replacing
> it with linux/gpio/consumer.h

Run "git log --oneline drivers/pci/controller/dwc/pci-imx6.c" and make
your subject line match -- capitalization, sentence structure, etc.

Write commit log in imperative mood, i.e., "Remove" instead of
"Removing": https://chris.beams.io/posts/git-commit/

The commit log mentions the trivial part but omits the important part
(converting from gpio to gpiod model).

> Signed-off-by: Maíra Canal <maira.canal@usp.br>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 31 ++++++++++-----------------
>  1 file changed, 11 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 80fc98acf097..e5ee54e37d05 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -11,13 +11,12 @@
>  #include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/kernel.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
>  #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
>  #include <linux/module.h>
> -#include <linux/of_gpio.h>
>  #include <linux/of_device.h>
>  #include <linux/of_address.h>
>  #include <linux/pci.h>
> @@ -63,7 +62,7 @@ struct imx6_pcie_drvdata {
>  
>  struct imx6_pcie {
>  	struct dw_pcie		*pci;
> -	int			reset_gpio;
> +	struct gpio_desc    *reset_gpio;
>  	bool			gpio_active_high;
>  	struct clk		*pcie_bus;
>  	struct clk		*pcie_phy;
> @@ -526,11 +525,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  	usleep_range(200, 500);
>  
>  	/* Some boards don't have PCIe reset GPIO. */
> -	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> -		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> +	if (imx6_pcie->reset_gpio) {
> +		gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
>  					imx6_pcie->gpio_active_high);
>  		msleep(100);
> -		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> +		gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
>  					!imx6_pcie->gpio_active_high);
>  	}
>  
> @@ -1025,22 +1024,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
>  		return PTR_ERR(pci->dbi_base);
>  
>  	/* Fetch GPIOs */
> -	imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
>  	imx6_pcie->gpio_active_high = of_property_read_bool(node,
>  						"reset-gpio-active-high");
> -	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> -		ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
> -				imx6_pcie->gpio_active_high ?
> -					GPIOF_OUT_INIT_HIGH :
> -					GPIOF_OUT_INIT_LOW,
> -				"PCIe reset");
> -		if (ret) {
> -			dev_err(dev, "unable to get reset gpio\n");
> -			return ret;
> -		}
> -	} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
> -		return imx6_pcie->reset_gpio;
> -	}
> +	imx6_pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> +			imx6_pcie->gpio_active_high ?  GPIOD_OUT_HIGH :
> +				GPIOD_OUT_LOW);
> +	if (IS_ERR(imx6_pcie->reset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpio),
> +					  "unable to get reset gpio\n");
>  
>  	/* Fetch clocks */
>  	imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
> -- 
> 2.31.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-10-19 19:45 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-19 15:26 [PATCH] pci-imx6: replacing legacy gpio interface for gpiod Maíra Canal
2021-10-19 15:26 ` Maíra Canal
2021-10-19 19:45 ` Bjorn Helgaas [this message]
2021-10-19 19:45   ` Bjorn Helgaas
2021-10-20 12:02   ` Maíra Canal
2021-10-20 12:02     ` Maíra Canal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211019194545.GA2393463@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=festevam@gmail.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=kw@linux.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maira.canal@usp.br \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.