From: Dmitry Osipenko <digetx@gmail.com>
To: Lee Jones <lee.jones@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Laxman Dewangan <ldewangan@nvidia.com>
Cc: linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org
Subject: [PATCH v1 2/3] regulator: tps80031: Remove driver
Date: Thu, 21 Oct 2021 22:22:57 +0300 [thread overview]
Message-ID: <20211021192258.21968-3-digetx@gmail.com> (raw)
In-Reply-To: <20211021192258.21968-1-digetx@gmail.com>
Driver was upstreamed in 2013 and never got a user, remove it.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/regulator/Kconfig | 9 -
drivers/regulator/Makefile | 1 -
drivers/regulator/tps80031-regulator.c | 753 -------------------------
3 files changed, 763 deletions(-)
delete mode 100644 drivers/regulator/tps80031-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 27578e9504d2..6be9b1c8a615 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1339,15 +1339,6 @@ config REGULATOR_TPS65912
help
This driver supports TPS65912 voltage regulator chip.
-config REGULATOR_TPS80031
- tristate "TI TPS80031/TPS80032 power regulator driver"
- depends on MFD_TPS80031
- help
- TPS80031/ TPS80032 Fully Integrated Power Management with Power
- Path and Battery Charger. It has 5 configurable step-down
- converters, 11 general purpose LDOs, VBUS generator and digital
- output to control regulators.
-
config REGULATOR_TWL4030
tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
depends on TWL4030_CORE
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 9e382b50a5ef..b07d2a22df0b 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -158,7 +158,6 @@ obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
-obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
diff --git a/drivers/regulator/tps80031-regulator.c b/drivers/regulator/tps80031-regulator.c
deleted file mode 100644
index a29e65230132..000000000000
--- a/drivers/regulator/tps80031-regulator.c
+++ /dev/null
@@ -1,753 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// tps80031-regulator.c -- TI TPS80031 regulator driver.
-//
-// Regulator driver for TI TPS80031/TPS80032 Fully Integrated Power
-// Management with Power Path and Battery Charger.
-//
-// Copyright (c) 2012, NVIDIA Corporation.
-//
-// Author: Laxman Dewangan <ldewangan@nvidia.com>
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mfd/tps80031.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/machine.h>
-#include <linux/slab.h>
-
-/* Flags for DCDC Voltage reading */
-#define DCDC_OFFSET_EN BIT(0)
-#define DCDC_EXTENDED_EN BIT(1)
-#define TRACK_MODE_ENABLE BIT(2)
-
-#define SMPS_MULTOFFSET_VIO BIT(1)
-#define SMPS_MULTOFFSET_SMPS1 BIT(3)
-#define SMPS_MULTOFFSET_SMPS2 BIT(4)
-#define SMPS_MULTOFFSET_SMPS3 BIT(6)
-#define SMPS_MULTOFFSET_SMPS4 BIT(0)
-
-#define SMPS_CMD_MASK 0xC0
-#define SMPS_VSEL_MASK 0x3F
-#define LDO_VSEL_MASK 0x1F
-#define LDO_TRACK_VSEL_MASK 0x3F
-
-#define MISC2_LDOUSB_IN_VSYS BIT(4)
-#define MISC2_LDOUSB_IN_PMID BIT(3)
-#define MISC2_LDOUSB_IN_MASK 0x18
-
-#define MISC2_LDO3_SEL_VIB_VAL BIT(0)
-#define MISC2_LDO3_SEL_VIB_MASK 0x1
-
-#define BOOST_HW_PWR_EN BIT(5)
-#define BOOST_HW_PWR_EN_MASK BIT(5)
-
-#define OPA_MODE_EN BIT(6)
-#define OPA_MODE_EN_MASK BIT(6)
-
-#define USB_VBUS_CTRL_SET 0x04
-#define USB_VBUS_CTRL_CLR 0x05
-#define VBUS_DISCHRG 0x20
-
-struct tps80031_regulator_info {
- /* Regulator register address.*/
- u8 trans_reg;
- u8 state_reg;
- u8 force_reg;
- u8 volt_reg;
- u8 volt_id;
-
- /*Power request bits */
- int preq_bit;
-
- /* used by regulator core */
- struct regulator_desc desc;
-
-};
-
-struct tps80031_regulator {
- struct device *dev;
- struct tps80031_regulator_info *rinfo;
-
- u8 device_flags;
- unsigned int config_flags;
- unsigned int ext_ctrl_flag;
-};
-
-static inline struct device *to_tps80031_dev(struct regulator_dev *rdev)
-{
- return rdev_get_dev(rdev)->parent->parent;
-}
-
-static int tps80031_reg_is_enabled(struct regulator_dev *rdev)
-{
- struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps80031_dev(rdev);
- u8 reg_val;
- int ret;
-
- if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
- return true;
-
- ret = tps80031_read(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
- ®_val);
- if (ret < 0) {
- dev_err(&rdev->dev, "Reg 0x%02x read failed, err = %d\n",
- ri->rinfo->state_reg, ret);
- return ret;
- }
- return (reg_val & TPS80031_STATE_MASK) == TPS80031_STATE_ON;
-}
-
-static int tps80031_reg_enable(struct regulator_dev *rdev)
-{
- struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps80031_dev(rdev);
- int ret;
-
- if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
- return 0;
-
- ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
- TPS80031_STATE_ON, TPS80031_STATE_MASK);
- if (ret < 0) {
- dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n",
- ri->rinfo->state_reg, ret);
- return ret;
- }
- return ret;
-}
-
-static int tps80031_reg_disable(struct regulator_dev *rdev)
-{
- struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps80031_dev(rdev);
- int ret;
-
- if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
- return 0;
-
- ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
- TPS80031_STATE_OFF, TPS80031_STATE_MASK);
- if (ret < 0)
- dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n",
- ri->rinfo->state_reg, ret);
- return ret;
-}
-
-/* DCDC voltages for the selector of 58 to 63 */
-static const int tps80031_dcdc_voltages[4][5] = {
- { 1350, 1500, 1800, 1900, 2100},
- { 1350, 1500, 1800, 1900, 2100},
- { 2084, 2315, 2778, 2932, 3241},
- { 4167, 2315, 2778, 2932, 3241},
-};
-
-static int tps80031_dcdc_list_voltage(struct regulator_dev *rdev, unsigned sel)
-{
- struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
- int volt_index = ri->device_flags & 0x3;
-
- if (sel == 0)
- return 0;
- else if (sel < 58)
- return regulator_list_voltage_linear(rdev, sel - 1);
- else
- return tps80031_dcdc_voltages[volt_index][sel - 58] * 1000;
-}
-
-static int tps80031_dcdc_set_voltage_sel(struct regulator_dev *rdev,
- unsigned vsel)
-{
- struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps80031_dev(rdev);
- int ret;
- u8 reg_val;
-
- if (ri->rinfo->force_reg) {
- ret = tps80031_read(parent, ri->rinfo->volt_id,
- ri->rinfo->force_reg, ®_val);
- if (ret < 0) {
- dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
- ri->rinfo->force_reg, ret);
- return ret;
- }
- if (!(reg_val & SMPS_CMD_MASK)) {
- ret = tps80031_update(parent, ri->rinfo->volt_id,
- ri->rinfo->force_reg, vsel, SMPS_VSEL_MASK);
- if (ret < 0)
- dev_err(ri->dev,
- "reg 0x%02x update failed, e = %d\n",
- ri->rinfo->force_reg, ret);
- return ret;
- }
- }
- ret = tps80031_update(parent, ri->rinfo->volt_id,
- ri->rinfo->volt_reg, vsel, SMPS_VSEL_MASK);
- if (ret < 0)
- dev_err(ri->dev, "reg 0x%02x update failed, e = %d\n",
- ri->rinfo->volt_reg, ret);
- return ret;
-}
-
-static int tps80031_dcdc_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps80031_dev(rdev);
- uint8_t vsel = 0;
- int ret;
-
- if (ri->rinfo->force_reg) {
- ret = tps80031_read(parent, ri->rinfo->volt_id,
- ri->rinfo->force_reg, &vsel);
- if (ret < 0) {
- dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
- ri->rinfo->force_reg, ret);
- return ret;
- }
-
- if (!(vsel & SMPS_CMD_MASK))
- return vsel & SMPS_VSEL_MASK;
- }
- ret = tps80031_read(parent, ri->rinfo->volt_id,
- ri->rinfo->volt_reg, &vsel);
- if (ret < 0) {
- dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
- ri->rinfo->volt_reg, ret);
- return ret;
- }
- return vsel & SMPS_VSEL_MASK;
-}
-
-static int tps80031_ldo_list_voltage(struct regulator_dev *rdev,
- unsigned int sel)
-{
- struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps80031_dev(rdev);
-
- /* Check for valid setting for TPS80031 or TPS80032-ES1.0 */
- if ((ri->rinfo->desc.id == TPS80031_REGULATOR_LDO2) &&
- (ri->device_flags & TRACK_MODE_ENABLE)) {
- unsigned nvsel = (sel) & 0x1F;
- if (((tps80031_get_chip_info(parent) == TPS80031) ||
- ((tps80031_get_chip_info(parent) == TPS80032) &&
- (tps80031_get_pmu_version(parent) == 0x0))) &&
- ((nvsel == 0x0) || (nvsel >= 0x19 && nvsel <= 0x1F))) {
- dev_err(ri->dev,
- "Invalid sel %d in track mode LDO2\n",
- nvsel);
- return -EINVAL;
- }
- }
-
- return regulator_list_voltage_linear(rdev, sel);
-}
-
-static int tps80031_ldo_map_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV)
-{
- struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps80031_dev(rdev);
-
- /* Check for valid setting for TPS80031 or TPS80032-ES1.0 */
- if ((ri->rinfo->desc.id == TPS80031_REGULATOR_LDO2) &&
- (ri->device_flags & TRACK_MODE_ENABLE)) {
- if (((tps80031_get_chip_info(parent) == TPS80031) ||
- ((tps80031_get_chip_info(parent) == TPS80032) &&
- (tps80031_get_pmu_version(parent) == 0x0)))) {
- return regulator_map_voltage_iterate(rdev, min_uV,
- max_uV);
- }
- }
-
- return regulator_map_voltage_linear(rdev, min_uV, max_uV);
-}
-
-static int tps80031_vbus_is_enabled(struct regulator_dev *rdev)
-{
- struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps80031_dev(rdev);
- int ret;
- uint8_t ctrl1 = 0;
- uint8_t ctrl3 = 0;
-
- ret = tps80031_read(parent, TPS80031_SLAVE_ID2,
- TPS80031_CHARGERUSB_CTRL1, &ctrl1);
- if (ret < 0) {
- dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
- TPS80031_CHARGERUSB_CTRL1, ret);
- return ret;
- }
- ret = tps80031_read(parent, TPS80031_SLAVE_ID2,
- TPS80031_CHARGERUSB_CTRL3, &ctrl3);
- if (ret < 0) {
- dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
- TPS80031_CHARGERUSB_CTRL3, ret);
- return ret;
- }
- if ((ctrl1 & OPA_MODE_EN) && (ctrl3 & BOOST_HW_PWR_EN))
- return 1;
- return ret;
-}
-
-static int tps80031_vbus_enable(struct regulator_dev *rdev)
-{
- struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps80031_dev(rdev);
- int ret;
-
- ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2,
- TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN);
- if (ret < 0) {
- dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
- TPS80031_CHARGERUSB_CTRL1, ret);
- return ret;
- }
-
- ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2,
- TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN);
- if (ret < 0) {
- dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
- TPS80031_CHARGERUSB_CTRL3, ret);
- return ret;
- }
- return ret;
-}
-
-static int tps80031_vbus_disable(struct regulator_dev *rdev)
-{
- struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps80031_dev(rdev);
- int ret;
-
- if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) {
- ret = tps80031_write(parent, TPS80031_SLAVE_ID2,
- USB_VBUS_CTRL_SET, VBUS_DISCHRG);
- if (ret < 0) {
- dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n",
- USB_VBUS_CTRL_SET, ret);
- return ret;
- }
- }
-
- ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2,
- TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN);
- if (ret < 0) {
- dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n",
- TPS80031_CHARGERUSB_CTRL1, ret);
- return ret;
- }
-
- ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2,
- TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN);
- if (ret < 0) {
- dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n",
- TPS80031_CHARGERUSB_CTRL3, ret);
- return ret;
- }
-
- mdelay(DIV_ROUND_UP(ri->rinfo->desc.enable_time, 1000));
- if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) {
- ret = tps80031_write(parent, TPS80031_SLAVE_ID2,
- USB_VBUS_CTRL_CLR, VBUS_DISCHRG);
- if (ret < 0) {
- dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n",
- USB_VBUS_CTRL_CLR, ret);
- return ret;
- }
- }
- return ret;
-}
-
-static const struct regulator_ops tps80031_dcdc_ops = {
- .list_voltage = tps80031_dcdc_list_voltage,
- .set_voltage_sel = tps80031_dcdc_set_voltage_sel,
- .get_voltage_sel = tps80031_dcdc_get_voltage_sel,
- .enable = tps80031_reg_enable,
- .disable = tps80031_reg_disable,
- .is_enabled = tps80031_reg_is_enabled,
-};
-
-static const struct regulator_ops tps80031_ldo_ops = {
- .list_voltage = tps80031_ldo_list_voltage,
- .map_voltage = tps80031_ldo_map_voltage,
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .enable = tps80031_reg_enable,
- .disable = tps80031_reg_disable,
- .is_enabled = tps80031_reg_is_enabled,
-};
-
-static const struct regulator_ops tps80031_vbus_sw_ops = {
- .list_voltage = regulator_list_voltage_linear,
- .enable = tps80031_vbus_enable,
- .disable = tps80031_vbus_disable,
- .is_enabled = tps80031_vbus_is_enabled,
-};
-
-static const struct regulator_ops tps80031_vbus_hw_ops = {
- .list_voltage = regulator_list_voltage_linear,
-};
-
-static const struct regulator_ops tps80031_ext_reg_ops = {
- .list_voltage = regulator_list_voltage_linear,
- .enable = tps80031_reg_enable,
- .disable = tps80031_reg_disable,
- .is_enabled = tps80031_reg_is_enabled,
-};
-
-/* Non-exiting default definition for some register */
-#define TPS80031_SMPS3_CFG_FORCE 0
-#define TPS80031_SMPS4_CFG_FORCE 0
-
-#define TPS80031_VBUS_CFG_TRANS 0
-#define TPS80031_VBUS_CFG_STATE 0
-
-#define TPS80031_REG_SMPS(_id, _volt_id, _pbit) \
-{ \
- .trans_reg = TPS80031_##_id##_CFG_TRANS, \
- .state_reg = TPS80031_##_id##_CFG_STATE, \
- .force_reg = TPS80031_##_id##_CFG_FORCE, \
- .volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \
- .volt_id = TPS80031_SLAVE_##_volt_id, \
- .preq_bit = _pbit, \
- .desc = { \
- .name = "tps80031_"#_id, \
- .id = TPS80031_REGULATOR_##_id, \
- .n_voltages = 63, \
- .ops = &tps80031_dcdc_ops, \
- .type = REGULATOR_VOLTAGE, \
- .owner = THIS_MODULE, \
- .enable_time = 500, \
- }, \
-}
-
-#define TPS80031_REG_LDO(_id, _preq_bit) \
-{ \
- .trans_reg = TPS80031_##_id##_CFG_TRANS, \
- .state_reg = TPS80031_##_id##_CFG_STATE, \
- .volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \
- .volt_id = TPS80031_SLAVE_ID1, \
- .preq_bit = _preq_bit, \
- .desc = { \
- .owner = THIS_MODULE, \
- .name = "tps80031_"#_id, \
- .id = TPS80031_REGULATOR_##_id, \
- .ops = &tps80031_ldo_ops, \
- .type = REGULATOR_VOLTAGE, \
- .min_uV = 1000000, \
- .uV_step = 100000, \
- .linear_min_sel = 1, \
- .n_voltages = 25, \
- .vsel_reg = TPS80031_##_id##_CFG_VOLTAGE, \
- .vsel_mask = LDO_VSEL_MASK, \
- .enable_time = 500, \
- }, \
-}
-
-#define TPS80031_REG_FIXED(_id, max_mV, _ops, _delay, _pbit) \
-{ \
- .trans_reg = TPS80031_##_id##_CFG_TRANS, \
- .state_reg = TPS80031_##_id##_CFG_STATE, \
- .volt_id = TPS80031_SLAVE_ID1, \
- .preq_bit = _pbit, \
- .desc = { \
- .name = "tps80031_"#_id, \
- .id = TPS80031_REGULATOR_##_id, \
- .min_uV = max_mV * 1000, \
- .n_voltages = 1, \
- .ops = &_ops, \
- .type = REGULATOR_VOLTAGE, \
- .owner = THIS_MODULE, \
- .enable_time = _delay, \
- }, \
-}
-
-static struct tps80031_regulator_info tps80031_rinfo[TPS80031_REGULATOR_MAX] = {
- TPS80031_REG_SMPS(VIO, ID0, 4),
- TPS80031_REG_SMPS(SMPS1, ID0, 0),
- TPS80031_REG_SMPS(SMPS2, ID0, 1),
- TPS80031_REG_SMPS(SMPS3, ID1, 2),
- TPS80031_REG_SMPS(SMPS4, ID1, 3),
- TPS80031_REG_LDO(VANA, -1),
- TPS80031_REG_LDO(LDO1, 8),
- TPS80031_REG_LDO(LDO2, 9),
- TPS80031_REG_LDO(LDO3, 10),
- TPS80031_REG_LDO(LDO4, 11),
- TPS80031_REG_LDO(LDO5, 12),
- TPS80031_REG_LDO(LDO6, 13),
- TPS80031_REG_LDO(LDO7, 14),
- TPS80031_REG_LDO(LDOLN, 15),
- TPS80031_REG_LDO(LDOUSB, 5),
- TPS80031_REG_FIXED(VBUS, 5000, tps80031_vbus_hw_ops, 100000, -1),
- TPS80031_REG_FIXED(REGEN1, 3300, tps80031_ext_reg_ops, 0, 16),
- TPS80031_REG_FIXED(REGEN2, 3300, tps80031_ext_reg_ops, 0, 17),
- TPS80031_REG_FIXED(SYSEN, 3300, tps80031_ext_reg_ops, 0, 18),
-};
-
-static int tps80031_power_req_config(struct device *parent,
- struct tps80031_regulator *ri,
- struct tps80031_regulator_platform_data *tps80031_pdata)
-{
- int ret = 0;
-
- if (ri->rinfo->preq_bit < 0)
- goto skip_pwr_req_config;
-
- ret = tps80031_ext_power_req_config(parent, ri->ext_ctrl_flag,
- ri->rinfo->preq_bit, ri->rinfo->state_reg,
- ri->rinfo->trans_reg);
- if (ret < 0) {
- dev_err(ri->dev, "ext powerreq config failed, err = %d\n", ret);
- return ret;
- }
-
-skip_pwr_req_config:
- if (tps80031_pdata->ext_ctrl_flag & TPS80031_PWR_ON_ON_SLEEP) {
- ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
- ri->rinfo->trans_reg, TPS80031_TRANS_SLEEP_ON,
- TPS80031_TRANS_SLEEP_MASK);
- if (ret < 0) {
- dev_err(ri->dev, "Reg 0x%02x update failed, e %d\n",
- ri->rinfo->trans_reg, ret);
- return ret;
- }
- }
- return ret;
-}
-
-static int tps80031_regulator_config(struct device *parent,
- struct tps80031_regulator *ri,
- struct tps80031_regulator_platform_data *tps80031_pdata)
-{
- int ret = 0;
-
- switch (ri->rinfo->desc.id) {
- case TPS80031_REGULATOR_LDOUSB:
- if (ri->config_flags & (TPS80031_USBLDO_INPUT_VSYS |
- TPS80031_USBLDO_INPUT_PMID)) {
- unsigned val;
-
- if (ri->config_flags & TPS80031_USBLDO_INPUT_VSYS)
- val = MISC2_LDOUSB_IN_VSYS;
- else
- val = MISC2_LDOUSB_IN_PMID;
-
- ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
- TPS80031_MISC2, val,
- MISC2_LDOUSB_IN_MASK);
- if (ret < 0) {
- dev_err(ri->dev,
- "LDOUSB config failed, e= %d\n", ret);
- return ret;
- }
- }
- break;
-
- case TPS80031_REGULATOR_LDO3:
- if (ri->config_flags & TPS80031_LDO3_OUTPUT_VIB) {
- ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
- TPS80031_MISC2, MISC2_LDO3_SEL_VIB_VAL,
- MISC2_LDO3_SEL_VIB_MASK);
- if (ret < 0) {
- dev_err(ri->dev,
- "LDO3 config failed, e = %d\n", ret);
- return ret;
- }
- }
- break;
-
- case TPS80031_REGULATOR_VBUS:
- /* Provide SW control Ops if VBUS is SW control */
- if (!(ri->config_flags & TPS80031_VBUS_SW_ONLY))
- ri->rinfo->desc.ops = &tps80031_vbus_sw_ops;
- break;
- default:
- break;
- }
-
- /* Configure Active state to ON, SLEEP to OFF and OFF_state to OFF */
- ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->trans_reg,
- TPS80031_TRANS_ACTIVE_ON | TPS80031_TRANS_SLEEP_OFF |
- TPS80031_TRANS_OFF_OFF, TPS80031_TRANS_ACTIVE_MASK |
- TPS80031_TRANS_SLEEP_MASK | TPS80031_TRANS_OFF_MASK);
- if (ret < 0) {
- dev_err(ri->dev, "trans reg update failed, e %d\n", ret);
- return ret;
- }
-
- return ret;
-}
-
-static int check_smps_mode_mult(struct device *parent,
- struct tps80031_regulator *ri)
-{
- int mult_offset;
- int ret;
- u8 smps_offset;
- u8 smps_mult;
-
- ret = tps80031_read(parent, TPS80031_SLAVE_ID1,
- TPS80031_SMPS_OFFSET, &smps_offset);
- if (ret < 0) {
- dev_err(parent, "Error in reading smps offset register\n");
- return ret;
- }
-
- ret = tps80031_read(parent, TPS80031_SLAVE_ID1,
- TPS80031_SMPS_MULT, &smps_mult);
- if (ret < 0) {
- dev_err(parent, "Error in reading smps mult register\n");
- return ret;
- }
-
- switch (ri->rinfo->desc.id) {
- case TPS80031_REGULATOR_VIO:
- mult_offset = SMPS_MULTOFFSET_VIO;
- break;
- case TPS80031_REGULATOR_SMPS1:
- mult_offset = SMPS_MULTOFFSET_SMPS1;
- break;
- case TPS80031_REGULATOR_SMPS2:
- mult_offset = SMPS_MULTOFFSET_SMPS2;
- break;
- case TPS80031_REGULATOR_SMPS3:
- mult_offset = SMPS_MULTOFFSET_SMPS3;
- break;
- case TPS80031_REGULATOR_SMPS4:
- mult_offset = SMPS_MULTOFFSET_SMPS4;
- break;
- case TPS80031_REGULATOR_LDO2:
- ri->device_flags = smps_mult & BIT(5) ? TRACK_MODE_ENABLE : 0;
- /* TRACK mode the ldo2 varies from 600mV to 1300mV */
- if (ri->device_flags & TRACK_MODE_ENABLE) {
- ri->rinfo->desc.min_uV = 600000;
- ri->rinfo->desc.uV_step = 12500;
- ri->rinfo->desc.n_voltages = 57;
- ri->rinfo->desc.vsel_mask = LDO_TRACK_VSEL_MASK;
- }
- return 0;
- default:
- return 0;
- }
-
- ri->device_flags = (smps_offset & mult_offset) ? DCDC_OFFSET_EN : 0;
- ri->device_flags |= (smps_mult & mult_offset) ? DCDC_EXTENDED_EN : 0;
- switch (ri->device_flags) {
- case 0:
- ri->rinfo->desc.min_uV = 607700;
- ri->rinfo->desc.uV_step = 12660;
- break;
- case DCDC_OFFSET_EN:
- ri->rinfo->desc.min_uV = 700000;
- ri->rinfo->desc.uV_step = 12500;
- break;
- case DCDC_EXTENDED_EN:
- ri->rinfo->desc.min_uV = 1852000;
- ri->rinfo->desc.uV_step = 38600;
- break;
- case DCDC_OFFSET_EN | DCDC_EXTENDED_EN:
- ri->rinfo->desc.min_uV = 2161000;
- ri->rinfo->desc.uV_step = 38600;
- break;
- }
- return 0;
-}
-
-static int tps80031_regulator_probe(struct platform_device *pdev)
-{
- struct tps80031_platform_data *pdata;
- struct tps80031_regulator_platform_data *tps_pdata;
- struct tps80031_regulator *ri;
- struct tps80031_regulator *pmic;
- struct regulator_dev *rdev;
- struct regulator_config config = { };
- struct tps80031 *tps80031_mfd = dev_get_drvdata(pdev->dev.parent);
- int ret;
- int num;
-
- pdata = dev_get_platdata(pdev->dev.parent);
-
- if (!pdata) {
- dev_err(&pdev->dev, "No platform data\n");
- return -EINVAL;
- }
-
- pmic = devm_kcalloc(&pdev->dev,
- TPS80031_REGULATOR_MAX, sizeof(*pmic), GFP_KERNEL);
- if (!pmic)
- return -ENOMEM;
-
- for (num = 0; num < TPS80031_REGULATOR_MAX; ++num) {
- tps_pdata = pdata->regulator_pdata[num];
- ri = &pmic[num];
- ri->rinfo = &tps80031_rinfo[num];
- ri->dev = &pdev->dev;
-
- check_smps_mode_mult(pdev->dev.parent, ri);
- config.dev = &pdev->dev;
- config.init_data = NULL;
- config.driver_data = ri;
- config.regmap = tps80031_mfd->regmap[ri->rinfo->volt_id];
-
- if (tps_pdata) {
- config.init_data = tps_pdata->reg_init_data;
- ri->config_flags = tps_pdata->config_flags;
- ri->ext_ctrl_flag = tps_pdata->ext_ctrl_flag;
- ret = tps80031_regulator_config(pdev->dev.parent,
- ri, tps_pdata);
- if (ret < 0) {
- dev_err(&pdev->dev,
- "regulator config failed, e %d\n", ret);
- return ret;
- }
-
- ret = tps80031_power_req_config(pdev->dev.parent,
- ri, tps_pdata);
- if (ret < 0) {
- dev_err(&pdev->dev,
- "pwr_req config failed, err %d\n", ret);
- return ret;
- }
- }
- rdev = devm_regulator_register(&pdev->dev, &ri->rinfo->desc,
- &config);
- if (IS_ERR(rdev)) {
- dev_err(&pdev->dev,
- "register regulator failed %s\n",
- ri->rinfo->desc.name);
- return PTR_ERR(rdev);
- }
- }
-
- platform_set_drvdata(pdev, pmic);
- return 0;
-}
-
-static struct platform_driver tps80031_regulator_driver = {
- .driver = {
- .name = "tps80031-pmic",
- },
- .probe = tps80031_regulator_probe,
-};
-
-static int __init tps80031_regulator_init(void)
-{
- return platform_driver_register(&tps80031_regulator_driver);
-}
-subsys_initcall(tps80031_regulator_init);
-
-static void __exit tps80031_regulator_exit(void)
-{
- platform_driver_unregister(&tps80031_regulator_driver);
-}
-module_exit(tps80031_regulator_exit);
-
-MODULE_ALIAS("platform:tps80031-regulator");
-MODULE_DESCRIPTION("Regulator Driver for TI TPS80031/TPS80032 PMIC");
-MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
-MODULE_LICENSE("GPL v2");
--
2.32.0
next prev parent reply other threads:[~2021-10-21 19:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-21 19:22 [PATCH v1 0/3] Remove TPS80031 driver Dmitry Osipenko
2021-10-21 19:22 ` [PATCH v1 1/3] rtc: tps80031: Remove driver Dmitry Osipenko
2021-10-23 21:55 ` (subset) " Alexandre Belloni
2021-10-21 19:22 ` Dmitry Osipenko [this message]
2021-10-21 19:22 ` [PATCH v1 3/3] mfd: " Dmitry Osipenko
2021-10-22 8:05 ` Lee Jones
2021-10-22 8:20 ` Dmitry Osipenko
2021-10-22 8:46 ` Wolfram Sang
2021-10-22 8:50 ` Dmitry Osipenko
2021-10-22 9:54 ` Lee Jones
2021-10-22 10:02 ` Lee Jones
2021-10-23 19:58 ` (subset) [PATCH v1 0/3] Remove TPS80031 driver Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211021192258.21968-3-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=broonie@kernel.org \
--cc=ldewangan@nvidia.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.