* [Buildroot] [PATCH/next v1 2/7] package/rpi-firmware: bump version to fa9a006
2021-11-11 20:04 [Buildroot] [PATCH/next v1 1/7] configs/raspberrypi*: bump kernel version to 9878a11 (5.10.78) Peter Seiderer
@ 2021-11-11 20:04 ` Peter Seiderer
2021-11-12 22:13 ` Yann E. MORIN
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 3/7] package/rpi-userland: bump version to bab9bf8 Peter Seiderer
` (5 subsequent siblings)
6 siblings, 1 reply; 14+ messages in thread
From: Peter Seiderer @ 2021-11-11 20:04 UTC (permalink / raw)
To: buildroot; +Cc: Mahyar Koshkouei, Julien Grossholtz, Martin Bark
Changelog (since ):
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
---
package/rpi-firmware/rpi-firmware.hash | 2 +-
package/rpi-firmware/rpi-firmware.mk | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/rpi-firmware/rpi-firmware.hash b/package/rpi-firmware/rpi-firmware.hash
index 0ff7a73a37..7cbfd1b249 100644
--- a/package/rpi-firmware/rpi-firmware.hash
+++ b/package/rpi-firmware/rpi-firmware.hash
@@ -1,3 +1,3 @@
# Locally computed
-sha256 80af5efb51677edb7af6746a553dc2d8ad3f532ff44e4b7263f1e12d4bf72ffd rpi-firmware-2ef3800b1b71c0e30c2a61ecad6e007ae96ea342.tar.gz
+sha256 a079a31fc80a23421589edcacef94faa713b12d3e77b92710ae2594c8d549477 rpi-firmware-fa9a00624e7d5d3dcdb297dff132dc32cc2d9a25.tar.gz
sha256 c7283ff51f863d93a275c66e3b4cb08021a5dd4d8c1e7acc47d872fbe52d3d6b boot/LICENCE.broadcom
diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
index 3a4741a0ff..5e8b0379ba 100644
--- a/package/rpi-firmware/rpi-firmware.mk
+++ b/package/rpi-firmware/rpi-firmware.mk
@@ -4,7 +4,7 @@
#
################################################################################
-RPI_FIRMWARE_VERSION = 2ef3800b1b71c0e30c2a61ecad6e007ae96ea342
+RPI_FIRMWARE_VERSION = fa9a00624e7d5d3dcdb297dff132dc32cc2d9a25
RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
RPI_FIRMWARE_LICENSE = BSD-3-Clause
RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
--
2.33.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [Buildroot] [PATCH/next v1 2/7] package/rpi-firmware: bump version to fa9a006
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 2/7] package/rpi-firmware: bump version to fa9a006 Peter Seiderer
@ 2021-11-12 22:13 ` Yann E. MORIN
0 siblings, 0 replies; 14+ messages in thread
From: Yann E. MORIN @ 2021-11-12 22:13 UTC (permalink / raw)
To: Peter Seiderer
Cc: Martin Bark, Mahyar Koshkouei, Julien Grossholtz, buildroot
On 2021-11-11 21:04 +0100, Peter Seiderer spake thusly:
> Changelog (since ):
Changelog was missing, I added a crude copy-paste of git-log from
upstream.
> Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Applied to next, thanks.
Regards,
Yann E. MORIN.
> ---
> package/rpi-firmware/rpi-firmware.hash | 2 +-
> package/rpi-firmware/rpi-firmware.mk | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/package/rpi-firmware/rpi-firmware.hash b/package/rpi-firmware/rpi-firmware.hash
> index 0ff7a73a37..7cbfd1b249 100644
> --- a/package/rpi-firmware/rpi-firmware.hash
> +++ b/package/rpi-firmware/rpi-firmware.hash
> @@ -1,3 +1,3 @@
> # Locally computed
> -sha256 80af5efb51677edb7af6746a553dc2d8ad3f532ff44e4b7263f1e12d4bf72ffd rpi-firmware-2ef3800b1b71c0e30c2a61ecad6e007ae96ea342.tar.gz
> +sha256 a079a31fc80a23421589edcacef94faa713b12d3e77b92710ae2594c8d549477 rpi-firmware-fa9a00624e7d5d3dcdb297dff132dc32cc2d9a25.tar.gz
> sha256 c7283ff51f863d93a275c66e3b4cb08021a5dd4d8c1e7acc47d872fbe52d3d6b boot/LICENCE.broadcom
> diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
> index 3a4741a0ff..5e8b0379ba 100644
> --- a/package/rpi-firmware/rpi-firmware.mk
> +++ b/package/rpi-firmware/rpi-firmware.mk
> @@ -4,7 +4,7 @@
> #
> ################################################################################
>
> -RPI_FIRMWARE_VERSION = 2ef3800b1b71c0e30c2a61ecad6e007ae96ea342
> +RPI_FIRMWARE_VERSION = fa9a00624e7d5d3dcdb297dff132dc32cc2d9a25
> RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
> RPI_FIRMWARE_LICENSE = BSD-3-Clause
> RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
> --
> 2.33.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [PATCH/next v1 3/7] package/rpi-userland: bump version to bab9bf8
2021-11-11 20:04 [Buildroot] [PATCH/next v1 1/7] configs/raspberrypi*: bump kernel version to 9878a11 (5.10.78) Peter Seiderer
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 2/7] package/rpi-firmware: bump version to fa9a006 Peter Seiderer
@ 2021-11-11 20:04 ` Peter Seiderer
2021-11-12 22:14 ` Yann E. MORIN
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 4/7] package/rpi-bt-firmware: bump version to 3888ba2 Peter Seiderer
` (4 subsequent siblings)
6 siblings, 1 reply; 14+ messages in thread
From: Peter Seiderer @ 2021-11-11 20:04 UTC (permalink / raw)
To: buildroot; +Cc: Mahyar Koshkouei, Julien Grossholtz, Martin Bark
Changelog (since 6e8f786):
- 7f72bc2 userland: Reduce debug_sym error messages
- 0093675 interface/vcos: Get rid of LLTHREAD cast warning
- 705ff8e hello_fft: Update outdated link to V3D spec
- bab9bf8 hello_fft: Remove unused function declaration
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
---
package/rpi-userland/rpi-userland.hash | 2 +-
package/rpi-userland/rpi-userland.mk | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/rpi-userland/rpi-userland.hash b/package/rpi-userland/rpi-userland.hash
index 4927a8b43b..da573f3eae 100644
--- a/package/rpi-userland/rpi-userland.hash
+++ b/package/rpi-userland/rpi-userland.hash
@@ -1,3 +1,3 @@
# Locally computed
-sha256 e1ac871911e52b9fe07b3daa080b21bcdec3f1d2926cc98c934794780a4bf8d8 rpi-userland-6e8f786db223c2ab6eb9098a5cb0e5e1b25281cd.tar.gz
+sha256 e1ac871911e52b9fe07b3daa080b21bcdec3f1d2926cc98c934794780a4bf8d8 rpi-userland-bab9bf8790cd69660d443ce43b4e372999f3f7ac.tar.gz
sha256 bee6f1249175683d8610651706e1aa7dffcbfd3f9c4c05bc1e5ab34f313c2db5 LICENCE
diff --git a/package/rpi-userland/rpi-userland.mk b/package/rpi-userland/rpi-userland.mk
index a670a4a02d..09a7f6af74 100644
--- a/package/rpi-userland/rpi-userland.mk
+++ b/package/rpi-userland/rpi-userland.mk
@@ -4,7 +4,7 @@
#
################################################################################
-RPI_USERLAND_VERSION = 6e8f786db223c2ab6eb9098a5cb0e5e1b25281cd
+RPI_USERLAND_VERSION = bab9bf8790cd69660d443ce43b4e372999f3f7ac
RPI_USERLAND_SITE = $(call github,raspberrypi,userland,$(RPI_USERLAND_VERSION))
RPI_USERLAND_LICENSE = BSD-3-Clause
RPI_USERLAND_LICENSE_FILES = LICENCE
--
2.33.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [Buildroot] [PATCH/next v1 3/7] package/rpi-userland: bump version to bab9bf8
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 3/7] package/rpi-userland: bump version to bab9bf8 Peter Seiderer
@ 2021-11-12 22:14 ` Yann E. MORIN
0 siblings, 0 replies; 14+ messages in thread
From: Yann E. MORIN @ 2021-11-12 22:14 UTC (permalink / raw)
To: Peter Seiderer
Cc: Martin Bark, Mahyar Koshkouei, Julien Grossholtz, buildroot
Peter, All,
On 2021-11-11 21:04 +0100, Peter Seiderer spake thusly:
> Changelog (since 6e8f786):
>
> - 7f72bc2 userland: Reduce debug_sym error messages
> - 0093675 interface/vcos: Get rid of LLTHREAD cast warning
> - 705ff8e hello_fft: Update outdated link to V3D spec
> - bab9bf8 hello_fft: Remove unused function declaration
>
> Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Applied to next, thanks.
Regards,
Yann E. MORIN.
> ---
> package/rpi-userland/rpi-userland.hash | 2 +-
> package/rpi-userland/rpi-userland.mk | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/package/rpi-userland/rpi-userland.hash b/package/rpi-userland/rpi-userland.hash
> index 4927a8b43b..da573f3eae 100644
> --- a/package/rpi-userland/rpi-userland.hash
> +++ b/package/rpi-userland/rpi-userland.hash
> @@ -1,3 +1,3 @@
> # Locally computed
> -sha256 e1ac871911e52b9fe07b3daa080b21bcdec3f1d2926cc98c934794780a4bf8d8 rpi-userland-6e8f786db223c2ab6eb9098a5cb0e5e1b25281cd.tar.gz
> +sha256 e1ac871911e52b9fe07b3daa080b21bcdec3f1d2926cc98c934794780a4bf8d8 rpi-userland-bab9bf8790cd69660d443ce43b4e372999f3f7ac.tar.gz
> sha256 bee6f1249175683d8610651706e1aa7dffcbfd3f9c4c05bc1e5ab34f313c2db5 LICENCE
> diff --git a/package/rpi-userland/rpi-userland.mk b/package/rpi-userland/rpi-userland.mk
> index a670a4a02d..09a7f6af74 100644
> --- a/package/rpi-userland/rpi-userland.mk
> +++ b/package/rpi-userland/rpi-userland.mk
> @@ -4,7 +4,7 @@
> #
> ################################################################################
>
> -RPI_USERLAND_VERSION = 6e8f786db223c2ab6eb9098a5cb0e5e1b25281cd
> +RPI_USERLAND_VERSION = bab9bf8790cd69660d443ce43b4e372999f3f7ac
> RPI_USERLAND_SITE = $(call github,raspberrypi,userland,$(RPI_USERLAND_VERSION))
> RPI_USERLAND_LICENSE = BSD-3-Clause
> RPI_USERLAND_LICENSE_FILES = LICENCE
> --
> 2.33.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [PATCH/next v1 4/7] package/rpi-bt-firmware: bump version to 3888ba2
2021-11-11 20:04 [Buildroot] [PATCH/next v1 1/7] configs/raspberrypi*: bump kernel version to 9878a11 (5.10.78) Peter Seiderer
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 2/7] package/rpi-firmware: bump version to fa9a006 Peter Seiderer
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 3/7] package/rpi-userland: bump version to bab9bf8 Peter Seiderer
@ 2021-11-11 20:04 ` Peter Seiderer
2021-11-12 22:18 ` Yann E. MORIN
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 5/7] package/rpi-wifi-firmware: " Peter Seiderer
` (3 subsequent siblings)
6 siblings, 1 reply; 14+ messages in thread
From: Peter Seiderer @ 2021-11-11 20:04 UTC (permalink / raw)
To: buildroot; +Cc: Mahyar Koshkouei, Julien Grossholtz, Martin Bark
Changelog (since 883b726):
- 3e020f7 Add 43436S firmware
Future Zero 2 W boards will have an alternative version of 43436
that should have different firmware, named brcmfmac43436s-sdio.
- 3888ba2 Merge pull request #18 from HiassofT/43436S
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
---
package/rpi-bt-firmware/rpi-bt-firmware.hash | 2 +-
package/rpi-bt-firmware/rpi-bt-firmware.mk | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/rpi-bt-firmware/rpi-bt-firmware.hash b/package/rpi-bt-firmware/rpi-bt-firmware.hash
index 3f37d964d0..7e60aa4632 100644
--- a/package/rpi-bt-firmware/rpi-bt-firmware.hash
+++ b/package/rpi-bt-firmware/rpi-bt-firmware.hash
@@ -1,3 +1,3 @@
# Locally computed
-sha256 0e7fcfe75a8990815a184dc55f8fdf5d0644d351a15a7aef865ff90ff4ca8eb4 rpi-bt-firmware-883b72628de1d7efa45b421da0cbf175ac2374f8.tar.gz
+sha256 9bd61431d42322eb0610bd7eed218da255c4472efc203be4332a0872bb562ade rpi-bt-firmware-3888ba29898bb3f056d5f1eb283cb8de4c533bef.tar.gz
sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d LICENCE.broadcom_bcm43xx
diff --git a/package/rpi-bt-firmware/rpi-bt-firmware.mk b/package/rpi-bt-firmware/rpi-bt-firmware.mk
index 13358b4fda..8d658ce435 100644
--- a/package/rpi-bt-firmware/rpi-bt-firmware.mk
+++ b/package/rpi-bt-firmware/rpi-bt-firmware.mk
@@ -4,7 +4,7 @@
#
################################################################################
-RPI_BT_FIRMWARE_VERSION = 883b72628de1d7efa45b421da0cbf175ac2374f8
+RPI_BT_FIRMWARE_VERSION = 3888ba29898bb3f056d5f1eb283cb8de4c533bef
RPI_BT_FIRMWARE_SITE = $(call github,LibreELEC,brcmfmac_sdio-firmware-rpi,$(RPI_BT_FIRMWARE_VERSION))
RPI_BT_FIRMWARE_LICENSE = PROPRIETARY
RPI_BT_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx
--
2.33.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [Buildroot] [PATCH/next v1 4/7] package/rpi-bt-firmware: bump version to 3888ba2
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 4/7] package/rpi-bt-firmware: bump version to 3888ba2 Peter Seiderer
@ 2021-11-12 22:18 ` Yann E. MORIN
0 siblings, 0 replies; 14+ messages in thread
From: Yann E. MORIN @ 2021-11-12 22:18 UTC (permalink / raw)
To: Peter Seiderer
Cc: Martin Bark, Mahyar Koshkouei, Julien Grossholtz, buildroot
Peter, All,
On 2021-11-11 21:04 +0100, Peter Seiderer spake thusly:
> Changelog (since 883b726):
>
> - 3e020f7 Add 43436S firmware
> Future Zero 2 W boards will have an alternative version of 43436
> that should have different firmware, named brcmfmac43436s-sdio.
>
> - 3888ba2 Merge pull request #18 from HiassofT/43436S
>
> Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Applied to next, thanks. But see below for a comment of mone...
> ---
> package/rpi-bt-firmware/rpi-bt-firmware.hash | 2 +-
> package/rpi-bt-firmware/rpi-bt-firmware.mk | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/package/rpi-bt-firmware/rpi-bt-firmware.hash b/package/rpi-bt-firmware/rpi-bt-firmware.hash
> index 3f37d964d0..7e60aa4632 100644
> --- a/package/rpi-bt-firmware/rpi-bt-firmware.hash
> +++ b/package/rpi-bt-firmware/rpi-bt-firmware.hash
> @@ -1,3 +1,3 @@
> # Locally computed
> -sha256 0e7fcfe75a8990815a184dc55f8fdf5d0644d351a15a7aef865ff90ff4ca8eb4 rpi-bt-firmware-883b72628de1d7efa45b421da0cbf175ac2374f8.tar.gz
> +sha256 9bd61431d42322eb0610bd7eed218da255c4472efc203be4332a0872bb562ade rpi-bt-firmware-3888ba29898bb3f056d5f1eb283cb8de4c533bef.tar.gz
> sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d LICENCE.broadcom_bcm43xx
> diff --git a/package/rpi-bt-firmware/rpi-bt-firmware.mk b/package/rpi-bt-firmware/rpi-bt-firmware.mk
> index 13358b4fda..8d658ce435 100644
> --- a/package/rpi-bt-firmware/rpi-bt-firmware.mk
> +++ b/package/rpi-bt-firmware/rpi-bt-firmware.mk
> @@ -4,7 +4,7 @@
> #
> ################################################################################
>
> -RPI_BT_FIRMWARE_VERSION = 883b72628de1d7efa45b421da0cbf175ac2374f8
> +RPI_BT_FIRMWARE_VERSION = 3888ba29898bb3f056d5f1eb283cb8de4c533bef
> RPI_BT_FIRMWARE_SITE = $(call github,LibreELEC,brcmfmac_sdio-firmware-rpi,$(RPI_BT_FIRMWARE_VERSION))
Why do we have two packages that come from the same upstream repository,
at the same version, and basically just both copy a bunch of files?
Can't we have a single package instead, that also is named after the
upstream repository, and that has two options, each to install either
the BT or WiFi firmwares?
Regards,
Yann E. MORIN.
> RPI_BT_FIRMWARE_LICENSE = PROPRIETARY
> RPI_BT_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx
> --
> 2.33.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [PATCH/next v1 5/7] package/rpi-wifi-firmware: bump version to 3888ba2
2021-11-11 20:04 [Buildroot] [PATCH/next v1 1/7] configs/raspberrypi*: bump kernel version to 9878a11 (5.10.78) Peter Seiderer
` (2 preceding siblings ...)
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 4/7] package/rpi-bt-firmware: bump version to 3888ba2 Peter Seiderer
@ 2021-11-11 20:04 ` Peter Seiderer
2021-11-12 22:18 ` Yann E. MORIN
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 6/7] board/raspberrypi/readme.txt: add missing dtb files Peter Seiderer
` (2 subsequent siblings)
6 siblings, 1 reply; 14+ messages in thread
From: Peter Seiderer @ 2021-11-11 20:04 UTC (permalink / raw)
To: buildroot; +Cc: Mahyar Koshkouei, Julien Grossholtz, Martin Bark
Changelog (since 883b726):
- 3e020f7 Add 43436S firmware
Future Zero 2 W boards will have an alternative version of 43436
that should have different firmware, named brcmfmac43436s-sdio.
- 3888ba2 Merge pull request #18 from HiassofT/43436S
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
---
package/rpi-wifi-firmware/rpi-wifi-firmware.hash | 2 +-
package/rpi-wifi-firmware/rpi-wifi-firmware.mk | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.hash b/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
index 3bd62306eb..09cd197dd8 100644
--- a/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
+++ b/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
@@ -1,3 +1,3 @@
# Locally calculated
-sha256 0e7fcfe75a8990815a184dc55f8fdf5d0644d351a15a7aef865ff90ff4ca8eb4 rpi-wifi-firmware-883b72628de1d7efa45b421da0cbf175ac2374f8.tar.gz
+sha256 9bd61431d42322eb0610bd7eed218da255c4472efc203be4332a0872bb562ade rpi-wifi-firmware-3888ba29898bb3f056d5f1eb283cb8de4c533bef.tar.gz
sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d LICENCE.broadcom_bcm43xx
diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
index 582e0aa8f5..a467f2c7b4 100644
--- a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
+++ b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
@@ -4,7 +4,7 @@
#
################################################################################
-RPI_WIFI_FIRMWARE_VERSION = 883b72628de1d7efa45b421da0cbf175ac2374f8
+RPI_WIFI_FIRMWARE_VERSION = 3888ba29898bb3f056d5f1eb283cb8de4c533bef
RPI_WIFI_FIRMWARE_SITE = $(call github,LibreELEC,brcmfmac_sdio-firmware-rpi,$(RPI_WIFI_FIRMWARE_VERSION))
RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY
RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx
--
2.33.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [Buildroot] [PATCH/next v1 5/7] package/rpi-wifi-firmware: bump version to 3888ba2
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 5/7] package/rpi-wifi-firmware: " Peter Seiderer
@ 2021-11-12 22:18 ` Yann E. MORIN
0 siblings, 0 replies; 14+ messages in thread
From: Yann E. MORIN @ 2021-11-12 22:18 UTC (permalink / raw)
To: Peter Seiderer
Cc: Martin Bark, Mahyar Koshkouei, Julien Grossholtz, buildroot
Peter, All,
On 2021-11-11 21:04 +0100, Peter Seiderer spake thusly:
> Changelog (since 883b726):
>
> - 3e020f7 Add 43436S firmware
> Future Zero 2 W boards will have an alternative version of 43436
> that should have different firmware, named brcmfmac43436s-sdio.
>
> - 3888ba2 Merge pull request #18 from HiassofT/43436S
>
> Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Applied to next, thanks.
Regards,
Yann E. MORIN.
> ---
> package/rpi-wifi-firmware/rpi-wifi-firmware.hash | 2 +-
> package/rpi-wifi-firmware/rpi-wifi-firmware.mk | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.hash b/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
> index 3bd62306eb..09cd197dd8 100644
> --- a/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
> +++ b/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
> @@ -1,3 +1,3 @@
> # Locally calculated
> -sha256 0e7fcfe75a8990815a184dc55f8fdf5d0644d351a15a7aef865ff90ff4ca8eb4 rpi-wifi-firmware-883b72628de1d7efa45b421da0cbf175ac2374f8.tar.gz
> +sha256 9bd61431d42322eb0610bd7eed218da255c4472efc203be4332a0872bb562ade rpi-wifi-firmware-3888ba29898bb3f056d5f1eb283cb8de4c533bef.tar.gz
> sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d LICENCE.broadcom_bcm43xx
> diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
> index 582e0aa8f5..a467f2c7b4 100644
> --- a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
> +++ b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
> @@ -4,7 +4,7 @@
> #
> ################################################################################
>
> -RPI_WIFI_FIRMWARE_VERSION = 883b72628de1d7efa45b421da0cbf175ac2374f8
> +RPI_WIFI_FIRMWARE_VERSION = 3888ba29898bb3f056d5f1eb283cb8de4c533bef
> RPI_WIFI_FIRMWARE_SITE = $(call github,LibreELEC,brcmfmac_sdio-firmware-rpi,$(RPI_WIFI_FIRMWARE_VERSION))
> RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY
> RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx
> --
> 2.33.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [PATCH/next v1 6/7] board/raspberrypi/readme.txt: add missing dtb files
2021-11-11 20:04 [Buildroot] [PATCH/next v1 1/7] configs/raspberrypi*: bump kernel version to 9878a11 (5.10.78) Peter Seiderer
` (3 preceding siblings ...)
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 5/7] package/rpi-wifi-firmware: " Peter Seiderer
@ 2021-11-11 20:04 ` Peter Seiderer
2021-11-12 22:18 ` Yann E. MORIN
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 7/7] board/raspberrypi: add Raspberry Pi Zero 2 W Peter Seiderer
2021-11-12 22:13 ` [Buildroot] [PATCH/next v1 1/7] configs/raspberrypi*: bump kernel version to 9878a11 (5.10.78) Yann E. MORIN
6 siblings, 1 reply; 14+ messages in thread
From: Peter Seiderer @ 2021-11-11 20:04 UTC (permalink / raw)
To: buildroot; +Cc: Mahyar Koshkouei, Julien Grossholtz, Martin Bark
Add missing dtb files:
- bcm2708-rpi-cm.dtb from genimage-raspberrypi.cfg
- bcm2708-rpi-zero.dtb from genimage-raspberrypi0.cfg:
- bcm2708-rpi-zero-w.dtb from genimage-raspberrypi0w.cfg
- bcm2710-rpi-cm3.dtb from genimage-raspberrypi3.cfg
- bcm2837-rpi-3-b.dtb from genimage-raspberrypi3-64.cfg
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
---
board/raspberrypi/readme.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
index 98c44d80a1..d20096b5e6 100644
--- a/board/raspberrypi/readme.txt
+++ b/board/raspberrypi/readme.txt
@@ -76,11 +76,16 @@ After building, you should obtain this tree:
output/images/
+-- bcm2708-rpi-b.dtb [1]
+-- bcm2708-rpi-b-plus.dtb [1]
+ +-- bcm2708-rpi-cm.dtb [1]
+ +-- bcm2708-rpi-zero.dtb [1]
+ +-- bcm2708-rpi-zero-w.dtb [1]
+-- bcm2709-rpi-2-b.dtb [1]
+-- bcm2710-rpi-3-b.dtb [1]
+-- bcm2710-rpi-3-b-plus.dtb [1]
+ +-- bcm2710-rpi-cm3.dtb [1]
+-- bcm2711-rpi-4-b.dtb [1]
+-- bcm2711-rpi-cm4.dtb [1]
+ +-- bcm2837-rpi-3-b.dtb [1]
+-- boot.vfat
+-- rootfs.ext4
+-- rpi-firmware/
--
2.33.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [Buildroot] [PATCH/next v1 6/7] board/raspberrypi/readme.txt: add missing dtb files
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 6/7] board/raspberrypi/readme.txt: add missing dtb files Peter Seiderer
@ 2021-11-12 22:18 ` Yann E. MORIN
0 siblings, 0 replies; 14+ messages in thread
From: Yann E. MORIN @ 2021-11-12 22:18 UTC (permalink / raw)
To: Peter Seiderer
Cc: Martin Bark, Mahyar Koshkouei, Julien Grossholtz, buildroot
Peter, All,
On 2021-11-11 21:04 +0100, Peter Seiderer spake thusly:
> Add missing dtb files:
> - bcm2708-rpi-cm.dtb from genimage-raspberrypi.cfg
> - bcm2708-rpi-zero.dtb from genimage-raspberrypi0.cfg:
> - bcm2708-rpi-zero-w.dtb from genimage-raspberrypi0w.cfg
> - bcm2710-rpi-cm3.dtb from genimage-raspberrypi3.cfg
> - bcm2837-rpi-3-b.dtb from genimage-raspberrypi3-64.cfg
>
> Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Applied to next, thanks.
Regards,
Yann E. MORIN.
> ---
> board/raspberrypi/readme.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
> index 98c44d80a1..d20096b5e6 100644
> --- a/board/raspberrypi/readme.txt
> +++ b/board/raspberrypi/readme.txt
> @@ -76,11 +76,16 @@ After building, you should obtain this tree:
> output/images/
> +-- bcm2708-rpi-b.dtb [1]
> +-- bcm2708-rpi-b-plus.dtb [1]
> + +-- bcm2708-rpi-cm.dtb [1]
> + +-- bcm2708-rpi-zero.dtb [1]
> + +-- bcm2708-rpi-zero-w.dtb [1]
> +-- bcm2709-rpi-2-b.dtb [1]
> +-- bcm2710-rpi-3-b.dtb [1]
> +-- bcm2710-rpi-3-b-plus.dtb [1]
> + +-- bcm2710-rpi-cm3.dtb [1]
> +-- bcm2711-rpi-4-b.dtb [1]
> +-- bcm2711-rpi-cm4.dtb [1]
> + +-- bcm2837-rpi-3-b.dtb [1]
> +-- boot.vfat
> +-- rootfs.ext4
> +-- rpi-firmware/
> --
> 2.33.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [PATCH/next v1 7/7] board/raspberrypi: add Raspberry Pi Zero 2 W
2021-11-11 20:04 [Buildroot] [PATCH/next v1 1/7] configs/raspberrypi*: bump kernel version to 9878a11 (5.10.78) Peter Seiderer
` (4 preceding siblings ...)
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 6/7] board/raspberrypi/readme.txt: add missing dtb files Peter Seiderer
@ 2021-11-11 20:04 ` Peter Seiderer
2021-11-12 22:19 ` Yann E. MORIN
2021-11-12 22:13 ` [Buildroot] [PATCH/next v1 1/7] configs/raspberrypi*: bump kernel version to 9878a11 (5.10.78) Yann E. MORIN
6 siblings, 1 reply; 14+ messages in thread
From: Peter Seiderer @ 2021-11-11 20:04 UTC (permalink / raw)
To: buildroot; +Cc: Mahyar Koshkouei, Julien Grossholtz, Martin Bark
From: Julien Grossholtz <julien.grossholtz@openest.io>
The Raspberry-Pi Zero 2 W is an affordable single board computer. It is
a more powerful drop-in replacement for the Raspberry Pi Zero W.
The board incorporates an Raspberry-Pi RP3A0 system-in-package (SiP) with
a Broadcom BCM2710A1 and 512MB LPDDR2 SDRAM. The CPU is a quad-core 1Ghz
64-bit Arm Cortex-A53. As for other Raspberry-Pis it also provides
2.4GHz 802.11 b/g/n Wifi, Bluetooth 4.2 and BLE.
The BCM2710 cpu is similar to the Raspberry-Pi 3, it uses the same
kernel configuration as the Raspberry-Pi 2 and 3.
Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
[Based on https://patchwork.ozlabs.org/project/buildroot/patch/20211030213600.3445223-3-julien.grossholtz@openest.io/
- reformat genimage-raspberrypizero2w.cfg according to the beautify patch-set
- update kernel version to 9878a11 (5.10.78)
- use new bcm2710-rpi-zero-2-w dtb
- update commit log about kernel config (RPi2/3)
- add DEVELOPERS entries for Julien
]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
---
DEVELOPERS | 2 ++
board/raspberrypi/config_zero2w.txt | 29 +++++++++++++++
.../genimage-raspberrypizero2w.cfg | 32 +++++++++++++++++
board/raspberrypi/readme.txt | 5 +++
board/raspberrypizero2w | 1 +
configs/raspberrypizero2w_defconfig | 36 +++++++++++++++++++
6 files changed, 105 insertions(+)
create mode 100644 board/raspberrypi/config_zero2w.txt
create mode 100644 board/raspberrypi/genimage-raspberrypizero2w.cfg
create mode 120000 board/raspberrypizero2w
create mode 100644 configs/raspberrypizero2w_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 70262eac8c..6f812eb564 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1512,7 +1512,9 @@ N: Julien Corjon <corjon.j@ecagroup.com>
F: package/qt5/
N: Julien Grossholtz <julien.grossholtz@openest.io>
+F: board/raspberrypi/
F: board/technologic/ts7680/
+F: configs/raspberrypizero2w_defconfig
F: configs/ts7680_defconfig
F: package/paho-mqtt-c
diff --git a/board/raspberrypi/config_zero2w.txt b/board/raspberrypi/config_zero2w.txt
new file mode 100644
index 0000000000..9e6b7f5ccf
--- /dev/null
+++ b/board/raspberrypi/config_zero2w.txt
@@ -0,0 +1,29 @@
+# Please note that this is only a sample, we recommend you to change it to fit
+# your needs.
+# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
+# See http://buildroot.org/manual.html#rootfs-custom
+# and http://elinux.org/RPiconfig for a description of config.txt syntax
+
+start_file=start.elf
+fixup_file=fixup.dat
+
+kernel=zImage
+
+# To use an external initramfs file
+#initramfs rootfs.cpio.gz
+
+# Disable overscan assuming the display supports displaying the full resolution
+# If the text shown on the screen disappears off the edge, comment this out
+disable_overscan=1
+
+# How much memory in MB to assign to the GPU on Pi models having
+# 256, 512 or 1024 MB total memory
+gpu_mem_256=100
+gpu_mem_512=100
+gpu_mem_1024=100
+
+# fixes rpi (3B, 3B+, 3A+, 4B ,zero W and zero 2) ttyAMA0 serial console
+dtoverlay=miniuart-bt
+
+# enable autoprobing of Bluetooth driver without need of hciattach/btattach
+dtoverlay=krnbt=on
diff --git a/board/raspberrypi/genimage-raspberrypizero2w.cfg b/board/raspberrypi/genimage-raspberrypizero2w.cfg
new file mode 100644
index 0000000000..b510fea563
--- /dev/null
+++ b/board/raspberrypi/genimage-raspberrypizero2w.cfg
@@ -0,0 +1,32 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "bcm2710-rpi-zero-2-w.dtb",
+ "rpi-firmware/bootcode.bin",
+ "rpi-firmware/cmdline.txt",
+ "rpi-firmware/config.txt",
+ "rpi-firmware/fixup.dat",
+ "rpi-firmware/start.elf",
+ "rpi-firmware/overlays",
+ "zImage"
+ }
+ }
+
+ size = 32M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
index d20096b5e6..c81fd801ae 100644
--- a/board/raspberrypi/readme.txt
+++ b/board/raspberrypi/readme.txt
@@ -28,6 +28,10 @@ For model Zero (model A+ in smaller form factor):
$ make raspberrypi0_defconfig
+For model Zero 2 W (model B3 in smaller form factor):
+
+ $ make raspberrypizero2w_defconfig
+
For model 2 B:
$ make raspberrypi2_defconfig
@@ -79,6 +83,7 @@ After building, you should obtain this tree:
+-- bcm2708-rpi-cm.dtb [1]
+-- bcm2708-rpi-zero.dtb [1]
+-- bcm2708-rpi-zero-w.dtb [1]
+ +-- bcm2710-rpi-zero-2-w.dtb [1]
+-- bcm2709-rpi-2-b.dtb [1]
+-- bcm2710-rpi-3-b.dtb [1]
+-- bcm2710-rpi-3-b-plus.dtb [1]
diff --git a/board/raspberrypizero2w b/board/raspberrypizero2w
new file mode 120000
index 0000000000..fcdafc81ed
--- /dev/null
+++ b/board/raspberrypizero2w
@@ -0,0 +1 @@
+raspberrypi
\ No newline at end of file
diff --git a/configs/raspberrypizero2w_defconfig b/configs/raspberrypizero2w_defconfig
new file mode 100644
index 0000000000..ddd6b97b06
--- /dev/null
+++ b/configs/raspberrypizero2w_defconfig
@@ -0,0 +1,36 @@
+BR2_arm=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_NEON_VFPV4=y
+
+# Linux headers same as kernel, 5.10 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
+
+# Build the DTB from the kernel sources
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-zero-2-w"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypizero2w/config_zero2w.txt"
+
+# MicroSD images generation tools
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+
+# Filesystem / image
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypizero2w/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypizero2w/post-image.sh"
--
2.33.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [Buildroot] [PATCH/next v1 7/7] board/raspberrypi: add Raspberry Pi Zero 2 W
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 7/7] board/raspberrypi: add Raspberry Pi Zero 2 W Peter Seiderer
@ 2021-11-12 22:19 ` Yann E. MORIN
0 siblings, 0 replies; 14+ messages in thread
From: Yann E. MORIN @ 2021-11-12 22:19 UTC (permalink / raw)
To: Peter Seiderer
Cc: Martin Bark, Mahyar Koshkouei, Julien Grossholtz, buildroot
Peter, All,
On 2021-11-11 21:04 +0100, Peter Seiderer spake thusly:
> From: Julien Grossholtz <julien.grossholtz@openest.io>
>
> The Raspberry-Pi Zero 2 W is an affordable single board computer. It is
> a more powerful drop-in replacement for the Raspberry Pi Zero W.
>
> The board incorporates an Raspberry-Pi RP3A0 system-in-package (SiP) with
> a Broadcom BCM2710A1 and 512MB LPDDR2 SDRAM. The CPU is a quad-core 1Ghz
> 64-bit Arm Cortex-A53. As for other Raspberry-Pis it also provides
> 2.4GHz 802.11 b/g/n Wifi, Bluetooth 4.2 and BLE.
>
> The BCM2710 cpu is similar to the Raspberry-Pi 3, it uses the same
> kernel configuration as the Raspberry-Pi 2 and 3.
>
> Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
> [Based on https://patchwork.ozlabs.org/project/buildroot/patch/20211030213600.3445223-3-julien.grossholtz@openest.io/
> - reformat genimage-raspberrypizero2w.cfg according to the beautify patch-set
> - update kernel version to 9878a11 (5.10.78)
> - use new bcm2710-rpi-zero-2-w dtb
> - update commit log about kernel config (RPi2/3)
> - add DEVELOPERS entries for Julien
> ]
> Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Applied to next, thanks.
Regards,
Yann E. MORIN.
> ---
> DEVELOPERS | 2 ++
> board/raspberrypi/config_zero2w.txt | 29 +++++++++++++++
> .../genimage-raspberrypizero2w.cfg | 32 +++++++++++++++++
> board/raspberrypi/readme.txt | 5 +++
> board/raspberrypizero2w | 1 +
> configs/raspberrypizero2w_defconfig | 36 +++++++++++++++++++
> 6 files changed, 105 insertions(+)
> create mode 100644 board/raspberrypi/config_zero2w.txt
> create mode 100644 board/raspberrypi/genimage-raspberrypizero2w.cfg
> create mode 120000 board/raspberrypizero2w
> create mode 100644 configs/raspberrypizero2w_defconfig
>
> diff --git a/DEVELOPERS b/DEVELOPERS
> index 70262eac8c..6f812eb564 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -1512,7 +1512,9 @@ N: Julien Corjon <corjon.j@ecagroup.com>
> F: package/qt5/
>
> N: Julien Grossholtz <julien.grossholtz@openest.io>
> +F: board/raspberrypi/
> F: board/technologic/ts7680/
> +F: configs/raspberrypizero2w_defconfig
> F: configs/ts7680_defconfig
> F: package/paho-mqtt-c
>
> diff --git a/board/raspberrypi/config_zero2w.txt b/board/raspberrypi/config_zero2w.txt
> new file mode 100644
> index 0000000000..9e6b7f5ccf
> --- /dev/null
> +++ b/board/raspberrypi/config_zero2w.txt
> @@ -0,0 +1,29 @@
> +# Please note that this is only a sample, we recommend you to change it to fit
> +# your needs.
> +# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
> +# See http://buildroot.org/manual.html#rootfs-custom
> +# and http://elinux.org/RPiconfig for a description of config.txt syntax
> +
> +start_file=start.elf
> +fixup_file=fixup.dat
> +
> +kernel=zImage
> +
> +# To use an external initramfs file
> +#initramfs rootfs.cpio.gz
> +
> +# Disable overscan assuming the display supports displaying the full resolution
> +# If the text shown on the screen disappears off the edge, comment this out
> +disable_overscan=1
> +
> +# How much memory in MB to assign to the GPU on Pi models having
> +# 256, 512 or 1024 MB total memory
> +gpu_mem_256=100
> +gpu_mem_512=100
> +gpu_mem_1024=100
> +
> +# fixes rpi (3B, 3B+, 3A+, 4B ,zero W and zero 2) ttyAMA0 serial console
> +dtoverlay=miniuart-bt
> +
> +# enable autoprobing of Bluetooth driver without need of hciattach/btattach
> +dtoverlay=krnbt=on
> diff --git a/board/raspberrypi/genimage-raspberrypizero2w.cfg b/board/raspberrypi/genimage-raspberrypizero2w.cfg
> new file mode 100644
> index 0000000000..b510fea563
> --- /dev/null
> +++ b/board/raspberrypi/genimage-raspberrypizero2w.cfg
> @@ -0,0 +1,32 @@
> +image boot.vfat {
> + vfat {
> + files = {
> + "bcm2710-rpi-zero-2-w.dtb",
> + "rpi-firmware/bootcode.bin",
> + "rpi-firmware/cmdline.txt",
> + "rpi-firmware/config.txt",
> + "rpi-firmware/fixup.dat",
> + "rpi-firmware/start.elf",
> + "rpi-firmware/overlays",
> + "zImage"
> + }
> + }
> +
> + size = 32M
> +}
> +
> +image sdcard.img {
> + hdimage {
> + }
> +
> + partition boot {
> + partition-type = 0xC
> + bootable = "true"
> + image = "boot.vfat"
> + }
> +
> + partition rootfs {
> + partition-type = 0x83
> + image = "rootfs.ext4"
> + }
> +}
> diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
> index d20096b5e6..c81fd801ae 100644
> --- a/board/raspberrypi/readme.txt
> +++ b/board/raspberrypi/readme.txt
> @@ -28,6 +28,10 @@ For model Zero (model A+ in smaller form factor):
>
> $ make raspberrypi0_defconfig
>
> +For model Zero 2 W (model B3 in smaller form factor):
> +
> + $ make raspberrypizero2w_defconfig
> +
> For model 2 B:
>
> $ make raspberrypi2_defconfig
> @@ -79,6 +83,7 @@ After building, you should obtain this tree:
> +-- bcm2708-rpi-cm.dtb [1]
> +-- bcm2708-rpi-zero.dtb [1]
> +-- bcm2708-rpi-zero-w.dtb [1]
> + +-- bcm2710-rpi-zero-2-w.dtb [1]
> +-- bcm2709-rpi-2-b.dtb [1]
> +-- bcm2710-rpi-3-b.dtb [1]
> +-- bcm2710-rpi-3-b-plus.dtb [1]
> diff --git a/board/raspberrypizero2w b/board/raspberrypizero2w
> new file mode 120000
> index 0000000000..fcdafc81ed
> --- /dev/null
> +++ b/board/raspberrypizero2w
> @@ -0,0 +1 @@
> +raspberrypi
> \ No newline at end of file
> diff --git a/configs/raspberrypizero2w_defconfig b/configs/raspberrypizero2w_defconfig
> new file mode 100644
> index 0000000000..ddd6b97b06
> --- /dev/null
> +++ b/configs/raspberrypizero2w_defconfig
> @@ -0,0 +1,36 @@
> +BR2_arm=y
> +BR2_cortex_a53=y
> +BR2_ARM_FPU_NEON_VFPV4=y
> +
> +# Linux headers same as kernel, 5.10 series
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
> +
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
> +
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> +BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
> +
> +# Build the DTB from the kernel sources
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-zero-2-w"
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +
> +BR2_PACKAGE_RPI_FIRMWARE=y
> +BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
> +BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
> +BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypizero2w/config_zero2w.txt"
> +
> +# MicroSD images generation tools
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +
> +# Filesystem / image
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> +# BR2_TARGET_ROOTFS_TAR is not set
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypizero2w/post-build.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypizero2w/post-image.sh"
> --
> 2.33.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Buildroot] [PATCH/next v1 1/7] configs/raspberrypi*: bump kernel version to 9878a11 (5.10.78)
2021-11-11 20:04 [Buildroot] [PATCH/next v1 1/7] configs/raspberrypi*: bump kernel version to 9878a11 (5.10.78) Peter Seiderer
` (5 preceding siblings ...)
2021-11-11 20:04 ` [Buildroot] [PATCH/next v1 7/7] board/raspberrypi: add Raspberry Pi Zero 2 W Peter Seiderer
@ 2021-11-12 22:13 ` Yann E. MORIN
6 siblings, 0 replies; 14+ messages in thread
From: Yann E. MORIN @ 2021-11-12 22:13 UTC (permalink / raw)
To: Peter Seiderer
Cc: Martin Bark, Mahyar Koshkouei, Julien Grossholtz, buildroot
Peter, All,
On 2021-11-11 21:04 +0100, Peter Seiderer spake thusly:
> Now based on 5.10.78 (from 5.10.76).
>
> Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Applied to next, thanks.
Regards,
Yann E. MORIN.
> ---
> configs/raspberrypi0_defconfig | 2 +-
> configs/raspberrypi0w_defconfig | 2 +-
> configs/raspberrypi2_defconfig | 2 +-
> configs/raspberrypi3_64_defconfig | 2 +-
> configs/raspberrypi3_defconfig | 2 +-
> configs/raspberrypi3_qt5we_defconfig | 2 +-
> configs/raspberrypi4_64_defconfig | 2 +-
> configs/raspberrypi4_defconfig | 2 +-
> configs/raspberrypi_defconfig | 2 +-
> configs/raspberrypicm4io_64_defconfig | 2 +-
> configs/raspberrypicm4io_defconfig | 2 +-
> 11 files changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/configs/raspberrypi0_defconfig b/configs/raspberrypi0_defconfig
> index e49be1af7a..64f7a93377 100644
> --- a/configs/raspberrypi0_defconfig
> +++ b/configs/raspberrypi0_defconfig
> @@ -9,7 +9,7 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,581049d718caf95f5feb00607ac748d5841cf27c)/linux-581049d718caf95f5feb00607ac748d5841cf27c.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
>
> # Build the DTBs for A/B from the kernel sources: the zero is the same
> diff --git a/configs/raspberrypi0w_defconfig b/configs/raspberrypi0w_defconfig
> index 6be7401f6c..f3e7c453ab 100644
> --- a/configs/raspberrypi0w_defconfig
> +++ b/configs/raspberrypi0w_defconfig
> @@ -9,7 +9,7 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,581049d718caf95f5feb00607ac748d5841cf27c)/linux-581049d718caf95f5feb00607ac748d5841cf27c.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
> BR2_LINUX_KERNEL_DTS_SUPPORT=y
> BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w"
> diff --git a/configs/raspberrypi2_defconfig b/configs/raspberrypi2_defconfig
> index c59ee064b9..7befbf07e6 100644
> --- a/configs/raspberrypi2_defconfig
> +++ b/configs/raspberrypi2_defconfig
> @@ -12,7 +12,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,581049d718caf95f5feb00607ac748d5841cf27c)/linux-581049d718caf95f5feb00607ac748d5841cf27c.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
>
> # Build the DTB from the kernel sources
> diff --git a/configs/raspberrypi3_64_defconfig b/configs/raspberrypi3_64_defconfig
> index 7d863c1731..ebb6e2252b 100644
> --- a/configs/raspberrypi3_64_defconfig
> +++ b/configs/raspberrypi3_64_defconfig
> @@ -11,7 +11,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,581049d718caf95f5feb00607ac748d5841cf27c)/linux-581049d718caf95f5feb00607ac748d5841cf27c.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
>
> # Build the DTB from the kernel sources
> diff --git a/configs/raspberrypi3_defconfig b/configs/raspberrypi3_defconfig
> index f923a3028b..6a9c4e0d02 100644
> --- a/configs/raspberrypi3_defconfig
> +++ b/configs/raspberrypi3_defconfig
> @@ -11,7 +11,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,581049d718caf95f5feb00607ac748d5841cf27c)/linux-581049d718caf95f5feb00607ac748d5841cf27c.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
>
> # Build the DTB from the kernel sources
> diff --git a/configs/raspberrypi3_qt5we_defconfig b/configs/raspberrypi3_qt5we_defconfig
> index dea5060590..7d06b0bb5e 100644
> --- a/configs/raspberrypi3_qt5we_defconfig
> +++ b/configs/raspberrypi3_qt5we_defconfig
> @@ -12,7 +12,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,581049d718caf95f5feb00607ac748d5841cf27c)/linux-581049d718caf95f5feb00607ac748d5841cf27c.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
>
> # Build the DTB from the kernel sources
> diff --git a/configs/raspberrypi4_64_defconfig b/configs/raspberrypi4_64_defconfig
> index 436ea57f13..2b5446d8f1 100644
> --- a/configs/raspberrypi4_64_defconfig
> +++ b/configs/raspberrypi4_64_defconfig
> @@ -11,7 +11,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,581049d718caf95f5feb00607ac748d5841cf27c)/linux-581049d718caf95f5feb00607ac748d5841cf27c.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
>
> # Build the DTB from the kernel sources
> diff --git a/configs/raspberrypi4_defconfig b/configs/raspberrypi4_defconfig
> index ca506b38df..ac555ddd5e 100644
> --- a/configs/raspberrypi4_defconfig
> +++ b/configs/raspberrypi4_defconfig
> @@ -11,7 +11,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,581049d718caf95f5feb00607ac748d5841cf27c)/linux-581049d718caf95f5feb00607ac748d5841cf27c.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
>
> # Build the DTB from the kernel sources
> diff --git a/configs/raspberrypi_defconfig b/configs/raspberrypi_defconfig
> index f6fa92fb34..257e59536e 100644
> --- a/configs/raspberrypi_defconfig
> +++ b/configs/raspberrypi_defconfig
> @@ -11,7 +11,7 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,581049d718caf95f5feb00607ac748d5841cf27c)/linux-581049d718caf95f5feb00607ac748d5841cf27c.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
>
> # Build the DTBs for A/B, A+/B+ and compute module from the kernel sources
> diff --git a/configs/raspberrypicm4io_64_defconfig b/configs/raspberrypicm4io_64_defconfig
> index f29e4c492a..1ab379c557 100644
> --- a/configs/raspberrypicm4io_64_defconfig
> +++ b/configs/raspberrypicm4io_64_defconfig
> @@ -11,7 +11,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,581049d718caf95f5feb00607ac748d5841cf27c)/linux-581049d718caf95f5feb00607ac748d5841cf27c.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
>
> # Build the DTB from the kernel sources
> diff --git a/configs/raspberrypicm4io_defconfig b/configs/raspberrypicm4io_defconfig
> index fac706c4d2..9941754e25 100644
> --- a/configs/raspberrypicm4io_defconfig
> +++ b/configs/raspberrypicm4io_defconfig
> @@ -11,7 +11,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,581049d718caf95f5feb00607ac748d5841cf27c)/linux-581049d718caf95f5feb00607ac748d5841cf27c.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,9878a118cbdb7779fd15caa45915d22bff381ba3)/linux-9878a118cbdb7779fd15caa45915d22bff381ba3.tar.gz"
> BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
>
> # Build the DTB from the kernel sources
> --
> 2.33.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 14+ messages in thread