From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>
Subject: [PULL 1/4] hw/intc/arm_gicv3: Move checking of redist-region-count to arm_gicv3_common_realize
Date: Mon, 15 Nov 2021 20:19:43 +0000 [thread overview]
Message-ID: <20211115201946.327770-2-peter.maydell@linaro.org> (raw)
In-Reply-To: <20211115201946.327770-1-peter.maydell@linaro.org>
The GICv3 devices have an array property redist-region-count.
Currently we check this for errors (bad values) in
gicv3_init_irqs_and_mmio(), just before we use it. Move this error
checking to the arm_gicv3_common_realize() function, where we
sanity-check all of the other base-class properties. (This will
always be before gicv3_init_irqs_and_mmio() is called, because
that function is called in the subclass realize methods, after
they have called the parent-class realize.)
The motivation for this refactor is:
* we would like to use the redist_region_count[] values in
arm_gicv3_common_realize() in a subsequent patch, so we need
to have already done the sanity-checking first
* this removes the only use of the Error** argument to
gicv3_init_irqs_and_mmio(), so we can remove some error-handling
boilerplate
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
include/hw/intc/arm_gicv3_common.h | 2 +-
hw/intc/arm_gicv3.c | 6 +-----
hw/intc/arm_gicv3_common.c | 26 +++++++++++++-------------
hw/intc/arm_gicv3_kvm.c | 6 +-----
4 files changed, 16 insertions(+), 24 deletions(-)
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index aa4f0d67703..cb2b0d0ad45 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -306,6 +306,6 @@ struct ARMGICv3CommonClass {
};
void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
- const MemoryRegionOps *ops, Error **errp);
+ const MemoryRegionOps *ops);
#endif
diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c
index 3f24707838c..bcf54a5f0a5 100644
--- a/hw/intc/arm_gicv3.c
+++ b/hw/intc/arm_gicv3.c
@@ -393,11 +393,7 @@ static void arm_gic_realize(DeviceState *dev, Error **errp)
return;
}
- gicv3_init_irqs_and_mmio(s, gicv3_set_irq, gic_ops, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- return;
- }
+ gicv3_init_irqs_and_mmio(s, gicv3_set_irq, gic_ops);
gicv3_init_cpuif(s);
}
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 223db16feca..8e47809398b 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -250,22 +250,11 @@ static const VMStateDescription vmstate_gicv3 = {
};
void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
- const MemoryRegionOps *ops, Error **errp)
+ const MemoryRegionOps *ops)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(s);
- int rdist_capacity = 0;
int i;
- for (i = 0; i < s->nb_redist_regions; i++) {
- rdist_capacity += s->redist_region_count[i];
- }
- if (rdist_capacity < s->num_cpu) {
- error_setg(errp, "Capacity of the redist regions(%d) "
- "is less than number of vcpus(%d)",
- rdist_capacity, s->num_cpu);
- return;
- }
-
/* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
* GPIO array layout is thus:
* [0..N-1] spi
@@ -308,7 +297,7 @@ void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
{
GICv3State *s = ARM_GICV3_COMMON(dev);
- int i;
+ int i, rdist_capacity;
/* revision property is actually reserved and currently used only in order
* to keep the interface compatible with GICv2 code, avoiding extra
@@ -350,6 +339,17 @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
return;
}
+ rdist_capacity = 0;
+ for (i = 0; i < s->nb_redist_regions; i++) {
+ rdist_capacity += s->redist_region_count[i];
+ }
+ if (rdist_capacity < s->num_cpu) {
+ error_setg(errp, "Capacity of the redist regions(%d) "
+ "is less than number of vcpus(%d)",
+ rdist_capacity, s->num_cpu);
+ return;
+ }
+
s->cpu = g_new0(GICv3CPUState, s->num_cpu);
for (i = 0; i < s->num_cpu; i++) {
diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c
index 5c09f00dec2..ab58c73306d 100644
--- a/hw/intc/arm_gicv3_kvm.c
+++ b/hw/intc/arm_gicv3_kvm.c
@@ -787,11 +787,7 @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp)
return;
}
- gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- return;
- }
+ gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL);
for (i = 0; i < s->num_cpu; i++) {
ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i));
--
2.25.1
next prev parent reply other threads:[~2021-11-15 20:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-15 20:19 [PULL 0/4] target-arm queue Peter Maydell
2021-11-15 20:19 ` Peter Maydell [this message]
2021-11-15 20:19 ` [PULL 2/4] hw/intc/arm_gicv3: Set GICR_TYPER.Last correctly when nb_redist_regions > 1 Peter Maydell
2021-11-15 20:19 ` [PULL 3/4] hw/intc/arm_gicv3: Support multiple redistributor regions Peter Maydell
2021-11-15 20:19 ` [PULL 4/4] hw/rtc/pl031: Send RTC_CHANGE QMP event Peter Maydell
2021-11-16 11:49 ` [PULL 0/4] target-arm queue Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211115201946.327770-2-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.