* [PULL 1/4] hw/intc/arm_gicv3: Move checking of redist-region-count to arm_gicv3_common_realize
2021-11-15 20:19 [PULL 0/4] target-arm queue Peter Maydell
@ 2021-11-15 20:19 ` Peter Maydell
2021-11-15 20:19 ` [PULL 2/4] hw/intc/arm_gicv3: Set GICR_TYPER.Last correctly when nb_redist_regions > 1 Peter Maydell
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Peter Maydell @ 2021-11-15 20:19 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson
The GICv3 devices have an array property redist-region-count.
Currently we check this for errors (bad values) in
gicv3_init_irqs_and_mmio(), just before we use it. Move this error
checking to the arm_gicv3_common_realize() function, where we
sanity-check all of the other base-class properties. (This will
always be before gicv3_init_irqs_and_mmio() is called, because
that function is called in the subclass realize methods, after
they have called the parent-class realize.)
The motivation for this refactor is:
* we would like to use the redist_region_count[] values in
arm_gicv3_common_realize() in a subsequent patch, so we need
to have already done the sanity-checking first
* this removes the only use of the Error** argument to
gicv3_init_irqs_and_mmio(), so we can remove some error-handling
boilerplate
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
include/hw/intc/arm_gicv3_common.h | 2 +-
hw/intc/arm_gicv3.c | 6 +-----
hw/intc/arm_gicv3_common.c | 26 +++++++++++++-------------
hw/intc/arm_gicv3_kvm.c | 6 +-----
4 files changed, 16 insertions(+), 24 deletions(-)
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index aa4f0d67703..cb2b0d0ad45 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -306,6 +306,6 @@ struct ARMGICv3CommonClass {
};
void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
- const MemoryRegionOps *ops, Error **errp);
+ const MemoryRegionOps *ops);
#endif
diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c
index 3f24707838c..bcf54a5f0a5 100644
--- a/hw/intc/arm_gicv3.c
+++ b/hw/intc/arm_gicv3.c
@@ -393,11 +393,7 @@ static void arm_gic_realize(DeviceState *dev, Error **errp)
return;
}
- gicv3_init_irqs_and_mmio(s, gicv3_set_irq, gic_ops, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- return;
- }
+ gicv3_init_irqs_and_mmio(s, gicv3_set_irq, gic_ops);
gicv3_init_cpuif(s);
}
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 223db16feca..8e47809398b 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -250,22 +250,11 @@ static const VMStateDescription vmstate_gicv3 = {
};
void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
- const MemoryRegionOps *ops, Error **errp)
+ const MemoryRegionOps *ops)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(s);
- int rdist_capacity = 0;
int i;
- for (i = 0; i < s->nb_redist_regions; i++) {
- rdist_capacity += s->redist_region_count[i];
- }
- if (rdist_capacity < s->num_cpu) {
- error_setg(errp, "Capacity of the redist regions(%d) "
- "is less than number of vcpus(%d)",
- rdist_capacity, s->num_cpu);
- return;
- }
-
/* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
* GPIO array layout is thus:
* [0..N-1] spi
@@ -308,7 +297,7 @@ void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
{
GICv3State *s = ARM_GICV3_COMMON(dev);
- int i;
+ int i, rdist_capacity;
/* revision property is actually reserved and currently used only in order
* to keep the interface compatible with GICv2 code, avoiding extra
@@ -350,6 +339,17 @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
return;
}
+ rdist_capacity = 0;
+ for (i = 0; i < s->nb_redist_regions; i++) {
+ rdist_capacity += s->redist_region_count[i];
+ }
+ if (rdist_capacity < s->num_cpu) {
+ error_setg(errp, "Capacity of the redist regions(%d) "
+ "is less than number of vcpus(%d)",
+ rdist_capacity, s->num_cpu);
+ return;
+ }
+
s->cpu = g_new0(GICv3CPUState, s->num_cpu);
for (i = 0; i < s->num_cpu; i++) {
diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c
index 5c09f00dec2..ab58c73306d 100644
--- a/hw/intc/arm_gicv3_kvm.c
+++ b/hw/intc/arm_gicv3_kvm.c
@@ -787,11 +787,7 @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp)
return;
}
- gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- return;
- }
+ gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL);
for (i = 0; i < s->num_cpu; i++) {
ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i));
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PULL 2/4] hw/intc/arm_gicv3: Set GICR_TYPER.Last correctly when nb_redist_regions > 1
2021-11-15 20:19 [PULL 0/4] target-arm queue Peter Maydell
2021-11-15 20:19 ` [PULL 1/4] hw/intc/arm_gicv3: Move checking of redist-region-count to arm_gicv3_common_realize Peter Maydell
@ 2021-11-15 20:19 ` Peter Maydell
2021-11-15 20:19 ` [PULL 3/4] hw/intc/arm_gicv3: Support multiple redistributor regions Peter Maydell
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Peter Maydell @ 2021-11-15 20:19 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson
The 'Last' bit in the GICR_TYPER GICv3 redistributor register is
supposed to be set to 1 if this is the last redistributor in a series
of contiguous redistributor pages. Currently we set Last only for
the redistributor for CPU (num_cpu - 1). This only works if there is
a single redistributor region; if there are multiple redistributor
regions then we need to set the Last bit for the last redistributor
in each region.
This doesn't cause any problems currently because only the KVM GICv3
supports multiple redistributor regions, and it ignores the value in
GICv3State::gicr_typer. But we need to fix this before we can enable
support for multiple regions in the emulated GICv3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
hw/intc/arm_gicv3_common.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 8e47809398b..8de9205b386 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -297,7 +297,7 @@ void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
{
GICv3State *s = ARM_GICV3_COMMON(dev);
- int i, rdist_capacity;
+ int i, rdist_capacity, cpuidx;
/* revision property is actually reserved and currently used only in order
* to keep the interface compatible with GICv2 code, avoiding extra
@@ -355,7 +355,6 @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
for (i = 0; i < s->num_cpu; i++) {
CPUState *cpu = qemu_get_cpu(i);
uint64_t cpu_affid;
- int last;
s->cpu[i].cpu = cpu;
s->cpu[i].gic = s;
@@ -375,7 +374,6 @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
* PLPIS == 0 (physical LPIs not supported)
*/
cpu_affid = object_property_get_uint(OBJECT(cpu), "mp-affinity", NULL);
- last = (i == s->num_cpu - 1);
/* The CPU mp-affinity property is in MPIDR register format; squash
* the affinity bytes into 32 bits as the GICR_TYPER has them.
@@ -384,13 +382,22 @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
(cpu_affid & 0xFFFFFF);
s->cpu[i].gicr_typer = (cpu_affid << 32) |
(1 << 24) |
- (i << 8) |
- (last << 4);
+ (i << 8);
if (s->lpi_enable) {
s->cpu[i].gicr_typer |= GICR_TYPER_PLPIS;
}
}
+
+ /*
+ * Now go through and set GICR_TYPER.Last for the final
+ * redistributor in each region.
+ */
+ cpuidx = 0;
+ for (i = 0; i < s->nb_redist_regions; i++) {
+ cpuidx += s->redist_region_count[i];
+ s->cpu[cpuidx - 1].gicr_typer |= GICR_TYPER_LAST;
+ }
}
static void arm_gicv3_finalize(Object *obj)
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PULL 3/4] hw/intc/arm_gicv3: Support multiple redistributor regions
2021-11-15 20:19 [PULL 0/4] target-arm queue Peter Maydell
2021-11-15 20:19 ` [PULL 1/4] hw/intc/arm_gicv3: Move checking of redist-region-count to arm_gicv3_common_realize Peter Maydell
2021-11-15 20:19 ` [PULL 2/4] hw/intc/arm_gicv3: Set GICR_TYPER.Last correctly when nb_redist_regions > 1 Peter Maydell
@ 2021-11-15 20:19 ` Peter Maydell
2021-11-15 20:19 ` [PULL 4/4] hw/rtc/pl031: Send RTC_CHANGE QMP event Peter Maydell
2021-11-16 11:49 ` [PULL 0/4] target-arm queue Richard Henderson
4 siblings, 0 replies; 6+ messages in thread
From: Peter Maydell @ 2021-11-15 20:19 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson
Our GICv3 QOM interface includes an array property
redist-region-count which allows board models to specify that the
registributor registers are not in a single contiguous range, but
split into multiple pieces. We implemented this for KVM, but
currently the TCG GICv3 model insists that there is only one region.
You can see the limit being hit with a setup like:
qemu-system-aarch64 -machine virt,gic-version=3 -smp 124
Add support for split regions to the TCG GICv3. To do this we switch
from allocating a simple array of MemoryRegions to an array of
GICv3RedistRegion structs so that we can use the GICv3RedistRegion as
the opaque pointer in the MemoryRegion read/write callbacks. Each
GICv3RedistRegion contains the MemoryRegion, a backpointer allowing
the read/write callback to get hold of the GICv3State, and an index
which allows us to calculate which CPU's redistributor is being
accessed.
Note that arm_gicv3_kvm always passes in NULL as the ops argument
to gicv3_init_irqs_and_mmio(), so the only MemoryRegion read/write
callbacks we need to update to handle this new scheme are the
gicv3_redist_read/write functions used by the emulated GICv3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
include/hw/intc/arm_gicv3_common.h | 12 ++++++++-
hw/intc/arm_gicv3.c | 6 -----
hw/intc/arm_gicv3_common.c | 15 ++++++++---
hw/intc/arm_gicv3_kvm.c | 4 +--
hw/intc/arm_gicv3_redist.c | 40 ++++++++++++++++--------------
5 files changed, 46 insertions(+), 31 deletions(-)
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index cb2b0d0ad45..fc38e4b7dca 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -215,13 +215,23 @@ struct GICv3CPUState {
bool seenbetter;
};
+/*
+ * The redistributor pages might be split into more than one region
+ * on some machine types if there are many CPUs.
+ */
+typedef struct GICv3RedistRegion {
+ GICv3State *gic;
+ MemoryRegion iomem;
+ uint32_t cpuidx; /* index of first CPU this region covers */
+} GICv3RedistRegion;
+
struct GICv3State {
/*< private >*/
SysBusDevice parent_obj;
/*< public >*/
MemoryRegion iomem_dist; /* Distributor */
- MemoryRegion *iomem_redist; /* Redistributor Regions */
+ GICv3RedistRegion *redist_regions; /* Redistributor Regions */
uint32_t *redist_region_count; /* redistributor count within each region */
uint32_t nb_redist_regions; /* number of redist regions */
diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c
index bcf54a5f0a5..c6282984b1e 100644
--- a/hw/intc/arm_gicv3.c
+++ b/hw/intc/arm_gicv3.c
@@ -387,12 +387,6 @@ static void arm_gic_realize(DeviceState *dev, Error **errp)
return;
}
- if (s->nb_redist_regions != 1) {
- error_setg(errp, "VGICv3 redist region number(%d) not equal to 1",
- s->nb_redist_regions);
- return;
- }
-
gicv3_init_irqs_and_mmio(s, gicv3_set_irq, gic_ops);
gicv3_init_cpuif(s);
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 8de9205b386..9884d2e39b9 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -254,6 +254,7 @@ void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
{
SysBusDevice *sbd = SYS_BUS_DEVICE(s);
int i;
+ int cpuidx;
/* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
* GPIO array layout is thus:
@@ -282,14 +283,20 @@ void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
"gicv3_dist", 0x10000);
sysbus_init_mmio(sbd, &s->iomem_dist);
- s->iomem_redist = g_new0(MemoryRegion, s->nb_redist_regions);
+ s->redist_regions = g_new0(GICv3RedistRegion, s->nb_redist_regions);
+ cpuidx = 0;
for (i = 0; i < s->nb_redist_regions; i++) {
char *name = g_strdup_printf("gicv3_redist_region[%d]", i);
+ GICv3RedistRegion *region = &s->redist_regions[i];
- memory_region_init_io(&s->iomem_redist[i], OBJECT(s),
- ops ? &ops[1] : NULL, s, name,
+ region->gic = s;
+ region->cpuidx = cpuidx;
+ cpuidx += s->redist_region_count[i];
+
+ memory_region_init_io(®ion->iomem, OBJECT(s),
+ ops ? &ops[1] : NULL, region, name,
s->redist_region_count[i] * GICV3_REDIST_SIZE);
- sysbus_init_mmio(sbd, &s->iomem_redist[i]);
+ sysbus_init_mmio(sbd, ®ion->iomem);
g_free(name);
}
}
diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c
index ab58c73306d..5ec5ff9ef6e 100644
--- a/hw/intc/arm_gicv3_kvm.c
+++ b/hw/intc/arm_gicv3_kvm.c
@@ -825,7 +825,7 @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp)
KVM_VGIC_V3_ADDR_TYPE_DIST, s->dev_fd, 0);
if (!multiple_redist_region_allowed) {
- kvm_arm_register_device(&s->iomem_redist[0], -1,
+ kvm_arm_register_device(&s->redist_regions[0].iomem, -1,
KVM_DEV_ARM_VGIC_GRP_ADDR,
KVM_VGIC_V3_ADDR_TYPE_REDIST, s->dev_fd, 0);
} else {
@@ -838,7 +838,7 @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp)
uint64_t addr_ormask =
i | ((uint64_t)s->redist_region_count[i] << 52);
- kvm_arm_register_device(&s->iomem_redist[i], -1,
+ kvm_arm_register_device(&s->redist_regions[i].iomem, -1,
KVM_DEV_ARM_VGIC_GRP_ADDR,
KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION,
s->dev_fd, addr_ormask);
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 7072bfcbb1d..424e7e28a86 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -425,22 +425,24 @@ static MemTxResult gicr_writell(GICv3CPUState *cs, hwaddr offset,
MemTxResult gicv3_redist_read(void *opaque, hwaddr offset, uint64_t *data,
unsigned size, MemTxAttrs attrs)
{
- GICv3State *s = opaque;
+ GICv3RedistRegion *region = opaque;
+ GICv3State *s = region->gic;
GICv3CPUState *cs;
MemTxResult r;
int cpuidx;
assert((offset & (size - 1)) == 0);
- /* This region covers all the redistributor pages; there are
- * (for GICv3) two 64K pages per CPU. At the moment they are
- * all contiguous (ie in this one region), though we might later
- * want to allow splitting of redistributor pages into several
- * blocks so we can support more CPUs.
+ /*
+ * There are (for GICv3) two 64K redistributor pages per CPU.
+ * In some cases the redistributor pages for all CPUs are not
+ * contiguous (eg on the virt board they are split into two
+ * parts if there are too many CPUs to all fit in the same place
+ * in the memory map); if so then the GIC has multiple MemoryRegions
+ * for the redistributors.
*/
- cpuidx = offset / 0x20000;
- offset %= 0x20000;
- assert(cpuidx < s->num_cpu);
+ cpuidx = region->cpuidx + offset / GICV3_REDIST_SIZE;
+ offset %= GICV3_REDIST_SIZE;
cs = &s->cpu[cpuidx];
@@ -482,22 +484,24 @@ MemTxResult gicv3_redist_read(void *opaque, hwaddr offset, uint64_t *data,
MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
unsigned size, MemTxAttrs attrs)
{
- GICv3State *s = opaque;
+ GICv3RedistRegion *region = opaque;
+ GICv3State *s = region->gic;
GICv3CPUState *cs;
MemTxResult r;
int cpuidx;
assert((offset & (size - 1)) == 0);
- /* This region covers all the redistributor pages; there are
- * (for GICv3) two 64K pages per CPU. At the moment they are
- * all contiguous (ie in this one region), though we might later
- * want to allow splitting of redistributor pages into several
- * blocks so we can support more CPUs.
+ /*
+ * There are (for GICv3) two 64K redistributor pages per CPU.
+ * In some cases the redistributor pages for all CPUs are not
+ * contiguous (eg on the virt board they are split into two
+ * parts if there are too many CPUs to all fit in the same place
+ * in the memory map); if so then the GIC has multiple MemoryRegions
+ * for the redistributors.
*/
- cpuidx = offset / 0x20000;
- offset %= 0x20000;
- assert(cpuidx < s->num_cpu);
+ cpuidx = region->cpuidx + offset / GICV3_REDIST_SIZE;
+ offset %= GICV3_REDIST_SIZE;
cs = &s->cpu[cpuidx];
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PULL 4/4] hw/rtc/pl031: Send RTC_CHANGE QMP event
2021-11-15 20:19 [PULL 0/4] target-arm queue Peter Maydell
` (2 preceding siblings ...)
2021-11-15 20:19 ` [PULL 3/4] hw/intc/arm_gicv3: Support multiple redistributor regions Peter Maydell
@ 2021-11-15 20:19 ` Peter Maydell
2021-11-16 11:49 ` [PULL 0/4] target-arm queue Richard Henderson
4 siblings, 0 replies; 6+ messages in thread
From: Peter Maydell @ 2021-11-15 20:19 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson
From: Eric Auger <eric.auger@redhat.com>
The PL031 currently is not able to report guest RTC change to the QMP
monitor as opposed to mc146818 or spapr RTCs. This patch adds the call
to qapi_event_send_rtc_change() when the Load Register is written. The
value which is reported corresponds to the difference between the guest
reference time and the reference time kept in softmmu/rtc.c.
For instance adding 20s to the guest RTC value will report 20. Adding
an extra 20s to the guest RTC value will report 20 + 20 = 40.
The inclusion of qapi/qapi-types-misc-target.h in hw/rtl/pl031.c
require to compile the PL031 with specific_ss.add() to avoid
./qapi/qapi-types-misc-target.h:18:13: error: attempt to use poisoned
"TARGET_<ARCH>".
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210920122535.269988-1-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/rtc/pl031.c | 10 +++++++++-
hw/rtc/meson.build | 2 +-
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/hw/rtc/pl031.c b/hw/rtc/pl031.c
index 2bbb2062ac8..e7ced90b025 100644
--- a/hw/rtc/pl031.c
+++ b/hw/rtc/pl031.c
@@ -24,6 +24,7 @@
#include "qemu/log.h"
#include "qemu/module.h"
#include "trace.h"
+#include "qapi/qapi-events-misc-target.h"
#define RTC_DR 0x00 /* Data read register */
#define RTC_MR 0x04 /* Match register */
@@ -136,10 +137,17 @@ static void pl031_write(void * opaque, hwaddr offset,
trace_pl031_write(offset, value);
switch (offset) {
- case RTC_LR:
+ case RTC_LR: {
+ struct tm tm;
+
s->tick_offset += value - pl031_get_count(s);
+
+ qemu_get_timedate(&tm, s->tick_offset);
+ qapi_event_send_rtc_change(qemu_timedate_diff(&tm));
+
pl031_set_alarm(s);
break;
+ }
case RTC_MR:
s->mr = value;
pl031_set_alarm(s);
diff --git a/hw/rtc/meson.build b/hw/rtc/meson.build
index 7cecdee5ddb..8fd8d8f9a71 100644
--- a/hw/rtc/meson.build
+++ b/hw/rtc/meson.build
@@ -2,7 +2,7 @@
softmmu_ss.add(when: 'CONFIG_DS1338', if_true: files('ds1338.c'))
softmmu_ss.add(when: 'CONFIG_M41T80', if_true: files('m41t80.c'))
softmmu_ss.add(when: 'CONFIG_M48T59', if_true: files('m48t59.c'))
-softmmu_ss.add(when: 'CONFIG_PL031', if_true: files('pl031.c'))
+specific_ss.add(when: 'CONFIG_PL031', if_true: files('pl031.c'))
softmmu_ss.add(when: 'CONFIG_TWL92230', if_true: files('twl92230.c'))
softmmu_ss.add(when: ['CONFIG_ISA_BUS', 'CONFIG_M48T59'], if_true: files('m48t59-isa.c'))
softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP', if_true: files('xlnx-zynqmp-rtc.c'))
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PULL 0/4] target-arm queue
2021-11-15 20:19 [PULL 0/4] target-arm queue Peter Maydell
` (3 preceding siblings ...)
2021-11-15 20:19 ` [PULL 4/4] hw/rtc/pl031: Send RTC_CHANGE QMP event Peter Maydell
@ 2021-11-16 11:49 ` Richard Henderson
4 siblings, 0 replies; 6+ messages in thread
From: Richard Henderson @ 2021-11-16 11:49 UTC (permalink / raw)
To: Peter Maydell, qemu-devel
On 11/15/21 9:19 PM, Peter Maydell wrote:
> Hi; some minor changes for 6.2, which I think can be classified
> as bug fixes and are OK for this point in the release cycle.
> (Wouldn't be the end of the world if they slipped to 7.0.)
>
> -- PMM
>
> The following changes since commit 42f6c9179be4401974dd3a75ee72defd16b5092d:
>
> Merge tag 'pull-ppc-20211112' of https://github.com/legoater/qemu into staging (2021-11-12 12:28:25 +0100)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20211115-1
>
> for you to fetch changes up to 1adf528ec3bdf62ea3b580b7ad562534a3676ff5:
>
> hw/rtc/pl031: Send RTC_CHANGE QMP event (2021-11-15 18:53:00 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
> * Support multiple redistributor regions for TCG GICv3
> * Send RTC_CHANGE QMP event from pl031
>
> ----------------------------------------------------------------
> Eric Auger (1):
> hw/rtc/pl031: Send RTC_CHANGE QMP event
>
> Peter Maydell (3):
> hw/intc/arm_gicv3: Move checking of redist-region-count to arm_gicv3_common_realize
> hw/intc/arm_gicv3: Set GICR_TYPER.Last correctly when nb_redist_regions > 1
> hw/intc/arm_gicv3: Support multiple redistributor regions
>
> include/hw/intc/arm_gicv3_common.h | 14 ++++++++--
> hw/intc/arm_gicv3.c | 12 +-------
> hw/intc/arm_gicv3_common.c | 56 ++++++++++++++++++++++++--------------
> hw/intc/arm_gicv3_kvm.c | 10 ++-----
> hw/intc/arm_gicv3_redist.c | 40 +++++++++++++++------------
> hw/rtc/pl031.c | 10 ++++++-
> hw/rtc/meson.build | 2 +-
> 7 files changed, 83 insertions(+), 61 deletions(-)
Applied, thanks.
r~
^ permalink raw reply [flat|nested] 6+ messages in thread