From: Jim Quinlan <jim2101024@gmail.com>
To: linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
Nicolas Saenz Julienne <nsaenz@kernel.org>,
Rob Herring <robh@kernel.org>, Mark Brown <broonie@kernel.org>,
bcm-kernel-feedback-list@broadcom.com, jim2101024@gmail.com,
james.quinlan@broadcom.com
Cc: "Florian Fainelli" <f.fainelli@gmail.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v9 7/7] PCI: brcmstb: Do not turn off WOL regulators on suspend
Date: Fri, 19 Nov 2021 17:07:54 -0500 [thread overview]
Message-ID: <20211119220756.18628-8-jim2101024@gmail.com> (raw)
In-Reply-To: <20211119220756.18628-1-jim2101024@gmail.com>
If any downstream device can be awoken do not turn off
the regulators as the device will need them on.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
---
drivers/pci/controller/pcie-brcmstb.c | 53 ++++++++++++++++++++++-----
1 file changed, 44 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 9b4df253e79a..8e5cbf6850cd 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -298,6 +298,7 @@ struct brcm_pcie {
void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
bool refusal_mode;
struct subdev_regulators *sr;
+ bool ep_wakeup_capable;
};
/*
@@ -1166,9 +1167,21 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
pcie->bridge_sw_init_set(pcie, 1);
}
+static int pci_dev_may_wakeup(struct pci_dev *dev, void *data)
+{
+ bool *ret = data;
+
+ if (device_may_wakeup(&dev->dev)) {
+ *ret = true;
+ dev_info(&dev->dev, "disable cancelled for wake-up device\n");
+ }
+ return (int) *ret;
+}
+
static int brcm_pcie_suspend(struct device *dev)
{
struct brcm_pcie *pcie = dev_get_drvdata(dev);
+ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
int ret;
brcm_pcie_turn_off(pcie);
@@ -1187,11 +1200,22 @@ static int brcm_pcie_suspend(struct device *dev)
}
if (pcie->sr) {
- ret = regulator_bulk_disable(pcie->sr->num_supplies, pcie->sr->supplies);
- if (ret) {
- dev_err(dev, "Could not turn off regulators\n");
- reset_control_reset(pcie->rescal);
- return ret;
+ /*
+ * Now turn off the regulators, but if at least one
+ * downstream device is enabled as a wake-up source, do not
+ * turn off regulators.
+ */
+ pcie->ep_wakeup_capable = false;
+ pci_walk_bus(bridge->bus, pci_dev_may_wakeup,
+ &pcie->ep_wakeup_capable);
+ if (!pcie->ep_wakeup_capable) {
+ ret = regulator_bulk_disable(pcie->sr->num_supplies,
+ pcie->sr->supplies);
+ if (ret) {
+ dev_err(dev, "Could not turn off regulators\n");
+ reset_control_reset(pcie->rescal);
+ return ret;
+ }
}
}
clk_disable_unprepare(pcie->clk);
@@ -1212,10 +1236,21 @@ static int brcm_pcie_resume(struct device *dev)
return ret;
if (pcie->sr) {
- ret = regulator_bulk_enable(pcie->sr->num_supplies, pcie->sr->supplies);
- if (ret) {
- dev_err(dev, "Could not turn on regulators\n");
- goto err_disable_clk;
+ if (pcie->ep_wakeup_capable) {
+ /*
+ * We are resuming from a suspend. In the suspend we
+ * did not disable the power supplies, so there is
+ * no need to enable them (and falsely increase their
+ * usage count).
+ */
+ pcie->ep_wakeup_capable = false;
+ } else {
+ ret = regulator_bulk_enable(pcie->sr->num_supplies,
+ pcie->sr->supplies);
+ if (ret) {
+ dev_err(dev, "Could not turn on regulators\n");
+ goto err_disable_clk;
+ }
}
}
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jim Quinlan <jim2101024@gmail.com>
To: linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
Nicolas Saenz Julienne <nsaenz@kernel.org>,
Rob Herring <robh@kernel.org>, Mark Brown <broonie@kernel.org>,
bcm-kernel-feedback-list@broadcom.com, jim2101024@gmail.com,
james.quinlan@broadcom.com
Cc: "Florian Fainelli" <f.fainelli@gmail.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v9 7/7] PCI: brcmstb: Do not turn off WOL regulators on suspend
Date: Fri, 19 Nov 2021 17:07:54 -0500 [thread overview]
Message-ID: <20211119220756.18628-8-jim2101024@gmail.com> (raw)
In-Reply-To: <20211119220756.18628-1-jim2101024@gmail.com>
If any downstream device can be awoken do not turn off
the regulators as the device will need them on.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
---
drivers/pci/controller/pcie-brcmstb.c | 53 ++++++++++++++++++++++-----
1 file changed, 44 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 9b4df253e79a..8e5cbf6850cd 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -298,6 +298,7 @@ struct brcm_pcie {
void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
bool refusal_mode;
struct subdev_regulators *sr;
+ bool ep_wakeup_capable;
};
/*
@@ -1166,9 +1167,21 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
pcie->bridge_sw_init_set(pcie, 1);
}
+static int pci_dev_may_wakeup(struct pci_dev *dev, void *data)
+{
+ bool *ret = data;
+
+ if (device_may_wakeup(&dev->dev)) {
+ *ret = true;
+ dev_info(&dev->dev, "disable cancelled for wake-up device\n");
+ }
+ return (int) *ret;
+}
+
static int brcm_pcie_suspend(struct device *dev)
{
struct brcm_pcie *pcie = dev_get_drvdata(dev);
+ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
int ret;
brcm_pcie_turn_off(pcie);
@@ -1187,11 +1200,22 @@ static int brcm_pcie_suspend(struct device *dev)
}
if (pcie->sr) {
- ret = regulator_bulk_disable(pcie->sr->num_supplies, pcie->sr->supplies);
- if (ret) {
- dev_err(dev, "Could not turn off regulators\n");
- reset_control_reset(pcie->rescal);
- return ret;
+ /*
+ * Now turn off the regulators, but if at least one
+ * downstream device is enabled as a wake-up source, do not
+ * turn off regulators.
+ */
+ pcie->ep_wakeup_capable = false;
+ pci_walk_bus(bridge->bus, pci_dev_may_wakeup,
+ &pcie->ep_wakeup_capable);
+ if (!pcie->ep_wakeup_capable) {
+ ret = regulator_bulk_disable(pcie->sr->num_supplies,
+ pcie->sr->supplies);
+ if (ret) {
+ dev_err(dev, "Could not turn off regulators\n");
+ reset_control_reset(pcie->rescal);
+ return ret;
+ }
}
}
clk_disable_unprepare(pcie->clk);
@@ -1212,10 +1236,21 @@ static int brcm_pcie_resume(struct device *dev)
return ret;
if (pcie->sr) {
- ret = regulator_bulk_enable(pcie->sr->num_supplies, pcie->sr->supplies);
- if (ret) {
- dev_err(dev, "Could not turn on regulators\n");
- goto err_disable_clk;
+ if (pcie->ep_wakeup_capable) {
+ /*
+ * We are resuming from a suspend. In the suspend we
+ * did not disable the power supplies, so there is
+ * no need to enable them (and falsely increase their
+ * usage count).
+ */
+ pcie->ep_wakeup_capable = false;
+ } else {
+ ret = regulator_bulk_enable(pcie->sr->num_supplies,
+ pcie->sr->supplies);
+ if (ret) {
+ dev_err(dev, "Could not turn on regulators\n");
+ goto err_disable_clk;
+ }
}
}
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-19 22:10 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-19 22:07 [PATCH v9 0/7] PCI: brcmstb: root port turns on sub-device power Jim Quinlan
2021-11-19 22:07 ` Jim Quinlan
2021-11-19 22:07 ` [PATCH v9 1/7] PCI: brcmstb: Fix function return value handling Jim Quinlan
2021-11-19 22:07 ` Jim Quinlan
2021-11-19 22:07 ` [PATCH v9 2/7] dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map Jim Quinlan
2021-11-19 22:07 ` Jim Quinlan
2021-11-19 22:07 ` [PATCH v9 3/7] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators Jim Quinlan
2021-11-19 22:07 ` Jim Quinlan
2021-12-06 13:29 ` Lorenzo Pieralisi
2021-12-06 13:29 ` Lorenzo Pieralisi
2021-12-07 20:17 ` Rob Herring
2021-12-07 20:17 ` Rob Herring
2021-12-07 20:26 ` Jim Quinlan
2021-12-07 20:26 ` Jim Quinlan
2021-11-19 22:07 ` [PATCH v9 4/7] PCI: Add mechanism to turn on subdev regulators Jim Quinlan
2021-11-19 22:07 ` [PATCH v9 5/7] PCI: brcmstb: Split brcm_pcie_setup() into two funcs Jim Quinlan
2021-11-19 22:07 ` Jim Quinlan
2021-11-19 22:07 ` [PATCH v9 6/7] PCI: brcmstb: Add control of subdevice voltage regulators Jim Quinlan
2021-11-19 22:07 ` Jim Quinlan
2021-11-19 22:07 ` Jim Quinlan [this message]
2021-11-19 22:07 ` [PATCH v9 7/7] PCI: brcmstb: Do not turn off WOL regulators on suspend Jim Quinlan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211119220756.18628-8-jim2101024@gmail.com \
--to=jim2101024@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=f.fainelli@gmail.com \
--cc=james.quinlan@broadcom.com \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=nsaenz@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.