All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>, Andy Gross <agross@kernel.org>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH 3/3] phy: qcom-qmp: Add SM8450 UFS QMP Phy
Date: Wed,  1 Dec 2021 13:14:56 +0530	[thread overview]
Message-ID: <20211201074456.3969849-4-vkoul@kernel.org> (raw)
In-Reply-To: <20211201074456.3969849-1-vkoul@kernel.org>

SM8450 UFS seems to use same sequence as SM8350, so reuse the sequence
from SM8450. Add the new clock list for this phy and the new compatible

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 32 +++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 456a59d8c7d0..a959c97a699f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3091,6 +3091,10 @@ static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
 	"aux", "ref_clk_src", "com_aux"
 };
 
+static const char * const sm8450_ufs_phy_clk_l[] = {
+	"qref", "ref", "ref_aux",
+};
+
 static const char * const sdm845_ufs_phy_clk_l[] = {
 	"ref", "ref_aux",
 };
@@ -4087,6 +4091,31 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
 };
 
+static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
+	.type			= PHY_TYPE_UFS,
+	.nlanes			= 2,
+
+	.serdes_tbl		= sm8350_ufsphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+	.tx_tbl			= sm8350_ufsphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+	.rx_tbl			= sm8350_ufsphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+	.pcs_tbl		= sm8350_ufsphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+	.clk_list		= sm8450_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= sm8150_ufsphy_regs_layout,
+
+	.start_ctrl		= SERDES_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+	.phy_status		= PHYSTATUS,
+
+	.is_dual_lane_phy	= true,
+};
+
 static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
 	.type			= PHY_TYPE_USB3,
 	.nlanes			= 1,
@@ -5745,6 +5774,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm8350-qmp-usb3-uni-phy",
 		.data = &sm8350_usb3_uniphy_cfg,
+	}, {
+		.compatible = "qcom,sm8450-qmp-ufs-phy",
+		.data = &sm8450_ufsphy_cfg,
 	}, {
 		.compatible = "qcom,qcm2290-qmp-usb3-phy",
 		.data = &qcm2290_usb3phy_cfg,
-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>, Andy Gross <agross@kernel.org>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH 3/3] phy: qcom-qmp: Add SM8450 UFS QMP Phy
Date: Wed,  1 Dec 2021 13:14:56 +0530	[thread overview]
Message-ID: <20211201074456.3969849-4-vkoul@kernel.org> (raw)
In-Reply-To: <20211201074456.3969849-1-vkoul@kernel.org>

SM8450 UFS seems to use same sequence as SM8350, so reuse the sequence
from SM8450. Add the new clock list for this phy and the new compatible

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 32 +++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 456a59d8c7d0..a959c97a699f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3091,6 +3091,10 @@ static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
 	"aux", "ref_clk_src", "com_aux"
 };
 
+static const char * const sm8450_ufs_phy_clk_l[] = {
+	"qref", "ref", "ref_aux",
+};
+
 static const char * const sdm845_ufs_phy_clk_l[] = {
 	"ref", "ref_aux",
 };
@@ -4087,6 +4091,31 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
 };
 
+static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
+	.type			= PHY_TYPE_UFS,
+	.nlanes			= 2,
+
+	.serdes_tbl		= sm8350_ufsphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+	.tx_tbl			= sm8350_ufsphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+	.rx_tbl			= sm8350_ufsphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+	.pcs_tbl		= sm8350_ufsphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+	.clk_list		= sm8450_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= sm8150_ufsphy_regs_layout,
+
+	.start_ctrl		= SERDES_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+	.phy_status		= PHYSTATUS,
+
+	.is_dual_lane_phy	= true,
+};
+
 static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
 	.type			= PHY_TYPE_USB3,
 	.nlanes			= 1,
@@ -5745,6 +5774,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm8350-qmp-usb3-uni-phy",
 		.data = &sm8350_usb3_uniphy_cfg,
+	}, {
+		.compatible = "qcom,sm8450-qmp-ufs-phy",
+		.data = &sm8450_ufsphy_cfg,
 	}, {
 		.compatible = "qcom,qcm2290-qmp-usb3-phy",
 		.data = &qcm2290_usb3phy_cfg,
-- 
2.31.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2021-12-01  7:45 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-01  7:44 [PATCH 0/3] scsi|phy: Add SM8450 UFS & Phy support Vinod Koul
2021-12-01  7:44 ` Vinod Koul
2021-12-01  7:44 ` [PATCH 1/3] scsi: ufs: dt-bindings: Add SM8450 compatible strings Vinod Koul
2021-12-01  7:44   ` Vinod Koul
2021-12-03  3:20   ` Bjorn Andersson
2021-12-03  3:20     ` Bjorn Andersson
2021-12-13 19:02   ` Rob Herring
2021-12-13 19:02     ` Rob Herring
2021-12-01  7:44 ` [PATCH 2/3] dt-bindings: phy: qcom,qmp: Add SM8450 UFS phy compatible Vinod Koul
2021-12-01  7:44   ` [PATCH 2/3] dt-bindings: phy: qcom, qmp: " Vinod Koul
2021-12-03  3:19   ` [PATCH 2/3] dt-bindings: phy: qcom,qmp: " Bjorn Andersson
2021-12-03  3:19     ` Bjorn Andersson
2021-12-01  7:44 ` Vinod Koul [this message]
2021-12-01  7:44   ` [PATCH 3/3] phy: qcom-qmp: Add SM8450 UFS QMP Phy Vinod Koul
2021-12-03  3:20   ` Bjorn Andersson
2021-12-03  3:20     ` Bjorn Andersson
2021-12-03  2:58 ` [PATCH 0/3] scsi|phy: Add SM8450 UFS & Phy support Martin K. Petersen
2021-12-03  2:58   ` Martin K. Petersen
2021-12-03 17:42   ` Vinod Koul
2021-12-03 17:42     ` Vinod Koul
2021-12-07  2:35     ` Martin K. Petersen
2021-12-07  2:35       ` Martin K. Petersen
2021-12-07 11:59       ` Vinod Koul
2021-12-07 11:59         ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211201074456.3969849-4-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=martin.petersen@oracle.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.