All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jisheng Zhang <jszhang@kernel.org>
To: Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>
Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 4/5] riscv: mm: init: try IS_ENABLED(CONFIG_XIP_KERNEL) instead of #ifdef
Date: Mon,  6 Dec 2021 23:03:52 +0800	[thread overview]
Message-ID: <20211206150353.731-5-jszhang@kernel.org> (raw)
In-Reply-To: <20211206150353.731-1-jszhang@kernel.org>

Try our best to replace the conditional compilation using
"#ifdef CONFIG_XIP_KERNEL" with "IS_ENABLED(CONFIG_XIP_KERNEL)", to
simplify the code and to increase compile coverage.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
---
 arch/riscv/mm/init.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 9c5816971f40..5e979fe06054 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -161,13 +161,13 @@ early_param("mem", early_mem);
 static void __init setup_bootmem(void)
 {
 	phys_addr_t vmlinux_end = __pa_symbol(&_end);
-	phys_addr_t vmlinux_start = __pa_symbol(&_start);
 	phys_addr_t max_mapped_addr;
-	phys_addr_t phys_ram_end;
+	phys_addr_t phys_ram_end, vmlinux_start;
 
-#ifdef CONFIG_XIP_KERNEL
-	vmlinux_start = __pa_symbol(&_sdata);
-#endif
+	if (IS_ENABLED(CONFIG_XIP_KERNEL))
+		vmlinux_start = __pa_symbol(&_sdata);
+	else
+		vmlinux_start = __pa_symbol(&_start);
 
 	memblock_enforce_memory_limit(memory_limit);
 
@@ -183,11 +183,9 @@ static void __init setup_bootmem(void)
 	 */
 	memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
 
-
 	phys_ram_end = memblock_end_of_DRAM();
-#ifndef CONFIG_XIP_KERNEL
-	phys_ram_base = memblock_start_of_DRAM();
-#endif
+	if (!IS_ENABLED(CONFIG_XIP_KERNEL))
+		phys_ram_base = memblock_start_of_DRAM();
 	/*
 	 * memblock allocator is not aware of the fact that last 4K bytes of
 	 * the addressable memory can not be mapped because of IS_ERR_VALUE
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@kernel.org>
To: Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>
Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 4/5] riscv: mm: init: try IS_ENABLED(CONFIG_XIP_KERNEL) instead of #ifdef
Date: Mon,  6 Dec 2021 23:03:52 +0800	[thread overview]
Message-ID: <20211206150353.731-5-jszhang@kernel.org> (raw)
In-Reply-To: <20211206150353.731-1-jszhang@kernel.org>

Try our best to replace the conditional compilation using
"#ifdef CONFIG_XIP_KERNEL" with "IS_ENABLED(CONFIG_XIP_KERNEL)", to
simplify the code and to increase compile coverage.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
---
 arch/riscv/mm/init.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 9c5816971f40..5e979fe06054 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -161,13 +161,13 @@ early_param("mem", early_mem);
 static void __init setup_bootmem(void)
 {
 	phys_addr_t vmlinux_end = __pa_symbol(&_end);
-	phys_addr_t vmlinux_start = __pa_symbol(&_start);
 	phys_addr_t max_mapped_addr;
-	phys_addr_t phys_ram_end;
+	phys_addr_t phys_ram_end, vmlinux_start;
 
-#ifdef CONFIG_XIP_KERNEL
-	vmlinux_start = __pa_symbol(&_sdata);
-#endif
+	if (IS_ENABLED(CONFIG_XIP_KERNEL))
+		vmlinux_start = __pa_symbol(&_sdata);
+	else
+		vmlinux_start = __pa_symbol(&_start);
 
 	memblock_enforce_memory_limit(memory_limit);
 
@@ -183,11 +183,9 @@ static void __init setup_bootmem(void)
 	 */
 	memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
 
-
 	phys_ram_end = memblock_end_of_DRAM();
-#ifndef CONFIG_XIP_KERNEL
-	phys_ram_base = memblock_start_of_DRAM();
-#endif
+	if (!IS_ENABLED(CONFIG_XIP_KERNEL))
+		phys_ram_base = memblock_start_of_DRAM();
 	/*
 	 * memblock allocator is not aware of the fact that last 4K bytes of
 	 * the addressable memory can not be mapped because of IS_ERR_VALUE
-- 
2.34.1


  parent reply	other threads:[~2021-12-06 15:12 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-06 15:03 [PATCH v2 0/5] riscv: mm: init clean up #ifdefs Jisheng Zhang
2021-12-06 15:03 ` Jisheng Zhang
2021-12-06 15:03 ` [PATCH v2 1/5] riscv: mm: init: remove unnecessary "#ifdef CONFIG_CRASH_DUMP" Jisheng Zhang
2021-12-06 15:03   ` Jisheng Zhang
2021-12-06 15:03 ` [PATCH v2 2/5] riscv: mm: init: try best to use IS_ENABLED(CONFIG_64BIT) instead of #ifdef Jisheng Zhang
2021-12-06 15:03   ` Jisheng Zhang
2021-12-16 10:41   ` Alexandre ghiti
2021-12-16 10:41     ` Alexandre ghiti
2021-12-06 15:03 ` [PATCH v2 3/5] riscv: mm: init: remove _pt_ops and use pt_ops directly Jisheng Zhang
2021-12-06 15:03   ` Jisheng Zhang
2021-12-16 11:09   ` Alexandre ghiti
2021-12-16 11:09     ` Alexandre ghiti
2021-12-06 15:03 ` Jisheng Zhang [this message]
2021-12-06 15:03   ` [PATCH v2 4/5] riscv: mm: init: try IS_ENABLED(CONFIG_XIP_KERNEL) instead of #ifdef Jisheng Zhang
2021-12-06 15:03 ` [PATCH v2 5/5] riscv: mm: init: try best to remove #ifdef CONFIG_XIP_KERNEL usage Jisheng Zhang
2021-12-06 15:03   ` Jisheng Zhang
2022-01-18 19:15 ` [PATCH v2 0/5] riscv: mm: init clean up #ifdefs Palmer Dabbelt
2022-01-18 19:15   ` Palmer Dabbelt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211206150353.731-5-jszhang@kernel.org \
    --to=jszhang@kernel.org \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.