From: Hannes Reinecke <hare@suse.de>
To: Damien LeMoal <damien.lemoal@wdc.com>
Cc: linux-ide@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 30/73] libata: remove pointless VPRINTK() calls
Date: Wed, 8 Dec 2021 17:32:12 +0100 [thread overview]
Message-ID: <20211208163255.114660-31-hare@suse.de> (raw)
In-Reply-To: <20211208163255.114660-1-hare@suse.de>
Most of the information is already covered by tracepoints
(if not downright pointless), so remove the VPRINTK() calls.
And while we're at it, remove ata_scsi_dump_cdb(), too,
as this information can be retrieved from scsi tracing.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/ata/libata-core.c | 3 ---
drivers/ata/libata-sata.c | 2 --
drivers/ata/libata-scsi.c | 42 ---------------------------------------
drivers/ata/libata-sff.c | 9 +--------
drivers/ata/libata.h | 1 -
5 files changed, 1 insertion(+), 56 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 15ed4417bc68..982ccd761bc3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4542,8 +4542,6 @@ static void ata_sg_clean(struct ata_queued_cmd *qc)
WARN_ON_ONCE(sg == NULL);
- VPRINTK("unmapping %u sg elements\n", qc->n_elem);
-
if (qc->n_elem)
dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
@@ -4573,7 +4571,6 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
if (n_elem < 1)
return -1;
- VPRINTK("%d sg elements mapped\n", n_elem);
qc->orig_n_elem = qc->n_elem;
qc->n_elem = n_elem;
qc->flags |= ATA_QCFLAG_DMAMAP;
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 7b72c68bc9f7..e1339e18c800 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1258,8 +1258,6 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap)
{
int rc = 0;
- ata_scsi_dump_cdb(ap, cmd);
-
if (likely(ata_dev_enabled(ap->link.device)))
rc = __ata_scsi_queuecmd(cmd, ap->link.device);
else {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 4df7cbf6abe6..bbbd0a06ffd2 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1299,8 +1299,6 @@ static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
u64 lba = 0;
u32 len;
- VPRINTK("six-byte command\n");
-
lba |= ((u64)(cdb[1] & 0x1f)) << 16;
lba |= ((u64)cdb[2]) << 8;
lba |= ((u64)cdb[3]);
@@ -1326,8 +1324,6 @@ static void scsi_10_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
u64 lba = 0;
u32 len = 0;
- VPRINTK("ten-byte command\n");
-
lba |= ((u64)cdb[2]) << 24;
lba |= ((u64)cdb[3]) << 16;
lba |= ((u64)cdb[4]) << 8;
@@ -1355,8 +1351,6 @@ static void scsi_16_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
u64 lba = 0;
u32 len = 0;
- VPRINTK("sixteen-byte command\n");
-
lba |= ((u64)cdb[2]) << 56;
lba |= ((u64)cdb[3]) << 48;
lba |= ((u64)cdb[4]) << 40;
@@ -1706,8 +1700,6 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd,
struct ata_queued_cmd *qc;
int rc;
- VPRINTK("ENTER\n");
-
qc = ata_scsi_qc_new(dev, cmd);
if (!qc)
goto err_mem;
@@ -1738,7 +1730,6 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd,
/* select device, send command to hardware */
ata_qc_issue(qc);
- VPRINTK("EXIT\n");
return 0;
early_finish:
@@ -1851,8 +1842,6 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
2
};
- VPRINTK("ENTER\n");
-
/* set scsi removable (RMB) bit per ata bit, or if the
* AHCI port says it's external (Hotplug-capable, eSATA).
*/
@@ -2287,8 +2276,6 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf)
u8 dpofua, bp = 0xff;
u16 fp;
- VPRINTK("ENTER\n");
-
six_byte = (scsicmd[0] == MODE_SENSE);
ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */
/*
@@ -2406,8 +2393,6 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
log2_per_phys = ata_id_log2_per_physical_sector(dev->id);
lowest_aligned = ata_id_logical_sector_offset(dev->id, log2_per_phys);
- VPRINTK("ENTER\n");
-
if (args->cmd->cmnd[0] == READ_CAPACITY) {
if (last_lba >= 0xffffffffULL)
last_lba = 0xffffffff;
@@ -2474,7 +2459,6 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
*/
static unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf)
{
- VPRINTK("ENTER\n");
rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */
return 0;
@@ -2570,8 +2554,6 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
struct scsi_cmnd *cmd = qc->scsicmd;
unsigned int err_mask = qc->err_mask;
- VPRINTK("ENTER, err_mask 0x%X\n", err_mask);
-
/* handle completion from new EH */
if (unlikely(qc->ap->ops->error_handler &&
(err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) {
@@ -3675,8 +3657,6 @@ static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc)
u8 buffer[64];
const u8 *p = buffer;
- VPRINTK("ENTER\n");
-
six_byte = (cdb[0] == MODE_SELECT);
if (six_byte) {
if (scmd->cmd_len < 5) {
@@ -3974,26 +3954,6 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
return NULL;
}
-/**
- * ata_scsi_dump_cdb - dump SCSI command contents to dmesg
- * @ap: ATA port to which the command was being sent
- * @cmd: SCSI command to dump
- *
- * Prints the contents of a SCSI command via printk().
- */
-
-void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd)
-{
-#ifdef ATA_VERBOSE_DEBUG
- struct scsi_device *scsidev = cmd->device;
-
- VPRINTK("CDB (%u:%d,%d,%lld) %9ph\n",
- ap->print_id,
- scsidev->channel, scsidev->id, scsidev->lun,
- cmd->cmnd);
-#endif
-}
-
int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev)
{
u8 scsi_op = scmd->cmnd[0];
@@ -4072,8 +4032,6 @@ int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
spin_lock_irqsave(ap->lock, irq_flags);
- ata_scsi_dump_cdb(ap, cmd);
-
dev = ata_scsi_find_dev(ap, scsidev);
if (likely(dev))
rc = __ata_scsi_queuecmd(cmd, dev);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 58304dc401ac..e0cbabaad9e7 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -877,8 +877,6 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
if (unlikely(!bytes))
goto atapi_check;
- VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
-
if (unlikely(__atapi_pio_bytes(qc, bytes)))
goto err_out;
ata_sff_sync(ap); /* flush */
@@ -1462,9 +1460,6 @@ static unsigned int __ata_sff_port_intr(struct ata_port *ap,
{
u8 status;
- VPRINTK("ata%u: protocol %d task_state %d\n",
- ap->print_id, qc->tf.protocol, ap->hsm_task_state);
-
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
@@ -2587,7 +2582,6 @@ static void ata_bmdma_fill_sg(struct ata_queued_cmd *qc)
prd[pi].addr = cpu_to_le32(addr);
prd[pi].flags_len = cpu_to_le32(len & 0xffff);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
pi++;
sg_len -= len;
@@ -2647,7 +2641,6 @@ static void ata_bmdma_fill_sg_dumb(struct ata_queued_cmd *qc)
prd[++pi].addr = cpu_to_le32(addr + 0x8000);
}
prd[pi].flags_len = cpu_to_le32(blen);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
pi++;
sg_len -= len;
@@ -2784,7 +2777,7 @@ unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
if (ap->hsm_task_state == HSM_ST_LAST && ata_is_dma(qc->tf.protocol)) {
/* check status of DMA engine */
host_stat = ap->ops->bmdma_status(ap);
- VPRINTK("ata%u: host_stat 0x%X\n", ap->print_id, host_stat);
+ ata_port_dbg(ap, "host_stat 0x%X\n", host_stat);
/* if it's not our irq... */
if (!(host_stat & ATA_DMA_INTR))
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 68cdd81d747c..6661ba622858 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -148,7 +148,6 @@ extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
unsigned int id, u64 lun);
void ata_scsi_sdev_config(struct scsi_device *sdev);
int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev);
-void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd);
int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev);
/* libata-eh.c */
--
2.29.2
next prev parent reply other threads:[~2021-12-08 16:33 UTC|newest]
Thread overview: 114+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-08 16:31 [PATCH 00/73] libata: rework logging, take II Hannes Reinecke
2021-12-08 16:31 ` [PATCH 01/73] libata: remove pointless debugging messages Hannes Reinecke
2021-12-08 16:31 ` [PATCH 02/73] libata: Add ata_port_classify() helper Hannes Reinecke
2021-12-08 22:21 ` kernel test robot
2021-12-08 22:21 ` kernel test robot
2021-12-09 0:34 ` Damien Le Moal
2021-12-09 7:16 ` Hannes Reinecke
2021-12-09 4:20 ` kernel test robot
2021-12-08 16:31 ` [PATCH 03/73] libata: move ata_dump_id() to dynamic debugging Hannes Reinecke
2021-12-08 16:31 ` [PATCH 04/73] libata: sanitize ATA_HORKAGE_DUMP_ID Hannes Reinecke
2021-12-08 16:31 ` [PATCH 05/73] sata_mv: replace DPRINTK with 'pci_dump' module parameter Hannes Reinecke
2021-12-09 0:38 ` Damien Le Moal
2021-12-09 7:17 ` Hannes Reinecke
2021-12-09 8:10 ` Damien Le Moal
2021-12-08 16:31 ` [PATCH 06/73] sata_mv: kill 'port' argument in mv_dump_all_regs() Hannes Reinecke
2021-12-09 0:40 ` Damien Le Moal
2021-12-09 8:19 ` Hannes Reinecke
2021-12-08 16:31 ` [PATCH 07/73] libata: add reset tracepoints Hannes Reinecke
2021-12-08 16:31 ` [PATCH 08/73] libata: drop DPRINTK() calls in reset Hannes Reinecke
2021-12-09 0:47 ` Damien Le Moal
2021-12-08 16:31 ` [PATCH 09/73] libata: tracepoints for bus-master DMA Hannes Reinecke
2021-12-08 16:31 ` [PATCH 10/73] libata: drop debugging statements " Hannes Reinecke
2021-12-09 0:46 ` Damien Le Moal
2021-12-09 8:20 ` Hannes Reinecke
2021-12-08 16:31 ` [PATCH 11/73] pata_octeon_cf: add bmdma tracepoints and drop DPRINTK() calls Hannes Reinecke
2021-12-08 16:31 ` [PATCH 12/73] pata_arasan_cf: use generic tracepoints Hannes Reinecke
2021-12-08 16:31 ` [PATCH 13/73] sata_dwc_460ex: " Hannes Reinecke
2021-12-09 11:57 ` kernel test robot
2021-12-09 12:28 ` kernel test robot
2021-12-09 12:28 ` kernel test robot
2021-12-09 19:52 ` kernel test robot
2021-12-09 19:52 ` kernel test robot
2021-12-08 16:31 ` [PATCH 14/73] sata_nv: " Hannes Reinecke
2021-12-08 16:31 ` [PATCH 15/73] libata-sff: tracepoints for HSM state machine Hannes Reinecke
2021-12-08 16:31 ` [PATCH 16/73] libata-sff: add tracepoints for ata_sff_flush_pio_task() Hannes Reinecke
2021-12-08 16:31 ` [PATCH 17/73] libata-scsi: drop DPRINTK calls for cdb translation Hannes Reinecke
2021-12-08 16:32 ` [PATCH 18/73] libata: add tracepoints for ATA error handling Hannes Reinecke
2021-12-08 16:32 ` [PATCH 19/73] libata: drop DPRINTK() calls during " Hannes Reinecke
2021-12-09 0:50 ` Damien Le Moal
2021-12-08 16:32 ` [PATCH 20/73] libata-eh: remove DPRINTK() calls for request sense Hannes Reinecke
2021-12-09 0:51 ` Damien Le Moal
2021-12-08 16:32 ` [PATCH 21/73] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros Hannes Reinecke
2021-12-09 0:57 ` Damien Le Moal
2021-12-08 16:32 ` [PATCH 22/73] libata: add qc_prep tracepoint Hannes Reinecke
2021-12-09 8:42 ` Sergei Shtylyov
2021-12-09 11:14 ` Hannes Reinecke
2021-12-09 12:47 ` Sergei Shtylyov
2021-12-08 16:32 ` [PATCH 23/73] libata: move DPRINTK to ata debugging Hannes Reinecke
2021-12-08 16:32 ` [PATCH 24/73] pata_octeon_cf: remove DPRINTK() macro in interrupt context Hannes Reinecke
2021-12-09 0:58 ` Damien Le Moal
2021-12-08 16:32 ` [PATCH 25/73] pdc_adma: Remove DPRINTK call Hannes Reinecke
2021-12-08 16:32 ` [PATCH 26/73] sata_fsl: move DPRINTK to ata debugging Hannes Reinecke
2021-12-08 16:32 ` [PATCH 27/73] sata_rcar: replace DPRINTK() with ata_port_dbg() Hannes Reinecke
2021-12-08 16:32 ` [PATCH 28/73] sata_qstor: " Hannes Reinecke
2021-12-08 16:32 ` [PATCH 29/73] pata_pdc2027x: Replace PDPRINTK() with standard ata logging Hannes Reinecke
2021-12-08 16:32 ` Hannes Reinecke [this message]
2021-12-08 16:32 ` [PATCH 31/73] ahci: Drop pointless VPRINTK() calls and convert the remaining ones Hannes Reinecke
2021-12-08 16:32 ` [PATCH 32/73] pdc_adma: " Hannes Reinecke
2021-12-09 1:01 ` Damien Le Moal
2021-12-08 16:32 ` [PATCH 33/73] pata_octeon_cf: " Hannes Reinecke
2021-12-09 8:39 ` Sergey Shtylyov
2021-12-08 16:32 ` [PATCH 34/73] pata_via: Drop pointless VPRINTK() calls Hannes Reinecke
2021-12-08 16:32 ` [PATCH 35/73] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones Hannes Reinecke
2021-12-09 6:13 ` Mikael Pettersson
2021-12-08 16:32 ` [PATCH 36/73] sata_qstor: Drop pointless VPRINTK() calls Hannes Reinecke
2021-12-08 16:32 ` [PATCH 37/73] sata_rcar: " Hannes Reinecke
2021-12-08 16:32 ` [PATCH 38/73] sata_inic162x: " Hannes Reinecke
2021-12-08 16:32 ` [PATCH 39/73] sata_mv: Drop pointless VPRINTK() call and convert the remaining one Hannes Reinecke
2021-12-08 16:32 ` [PATCH 40/73] sata_nv: drop pointless VPRINTK() calls and convert remaining ones Hannes Reinecke
2021-12-08 16:32 ` [PATCH 41/73] sata_fsl: convert VPRINTK() calls to ata_port_dbg() Hannes Reinecke
2021-12-08 16:32 ` [PATCH 42/73] sata_sil: Drop pointless VPRINTK() calls Hannes Reinecke
2021-12-08 16:32 ` [PATCH 43/73] sata_sx4: Drop pointless VPRINTK() calls and convert the remaining ones Hannes Reinecke
2021-12-08 16:32 ` [PATCH 44/73] sata_sx4: add module parameter 'dimm_test' Hannes Reinecke
2021-12-08 16:32 ` [PATCH 45/73] libata: drop ata_msg_error() and ata_msg_intr() Hannes Reinecke
2021-12-08 16:32 ` [PATCH 46/73] libata: drop ata_msg_ctl() Hannes Reinecke
2021-12-08 16:32 ` [PATCH 47/73] libata: drop ata_msg_malloc() Hannes Reinecke
2021-12-08 16:32 ` [PATCH 48/73] libata: drop ata_msg_warn() Hannes Reinecke
2021-12-08 16:32 ` [PATCH 49/73] libata: drop ata_msg_probe() Hannes Reinecke
2021-12-08 16:32 ` [PATCH 50/73] libata: drop ata_msg_info() Hannes Reinecke
2021-12-08 16:32 ` [PATCH 51/73] libata: drop ata_msg_drv() Hannes Reinecke
2021-12-08 16:32 ` [PATCH 52/73] libata: remove 'new' ata message handling Hannes Reinecke
2021-12-08 16:32 ` [PATCH 53/73] libata: remove debug compilation switches Hannes Reinecke
2021-12-08 16:32 ` [PATCH 54/73] pata_atp867x: convert blank printk() calls Hannes Reinecke
2021-12-08 22:21 ` kernel test robot
2021-12-09 1:08 ` Damien Le Moal
2021-12-08 16:32 ` [PATCH 55/73] pata_cmd640: " Hannes Reinecke
2021-12-08 16:32 ` [PATCH 56/73] pata_cmd64x: " Hannes Reinecke
2021-12-08 16:32 ` [PATCH 57/73] pata_cs5520: " Hannes Reinecke
2021-12-08 16:32 ` [PATCH 58/73] pata_cs5536: " Hannes Reinecke
2021-12-08 16:32 ` [PATCH 59/73] pata_cypressx: " Hannes Reinecke
2021-12-09 8:25 ` Sergey Shtylyov
2021-12-08 16:32 ` [PATCH 60/73] pata_it821x: " Hannes Reinecke
2021-12-08 16:32 ` [PATCH 61/73] pata_marvell: " Hannes Reinecke
2021-12-08 16:32 ` [PATCH 62/73] pata_rz1000: " Hannes Reinecke
2021-12-09 1:10 ` Damien Le Moal
2021-12-08 16:32 ` [PATCH 63/73] pata_serverworks: " Hannes Reinecke
2021-12-08 16:32 ` [PATCH 64/73] pata_sil680: " Hannes Reinecke
2021-12-09 8:24 ` Sergey Shtylyov
2021-12-08 16:32 ` [PATCH 65/73] pdc_adma: remove disabled debugging messages Hannes Reinecke
2021-12-08 16:32 ` [PATCH 66/73] sata_sx4: convert blank printk() calls Hannes Reinecke
2021-12-08 16:32 ` [PATCH 67/73] sata_mv: convert remaining printk() to structured logging Hannes Reinecke
2021-12-08 16:32 ` [PATCH 68/73] pata_hpt37x: convert pr_XXX() calls Hannes Reinecke
2021-12-09 1:13 ` Damien Le Moal
2021-12-08 16:32 ` [PATCH 69/73] pata_octeon_cf: Replace pr_XXX() calls with structured logging Hannes Reinecke
2021-12-09 8:08 ` Sergey Shtylyov
2021-12-08 16:32 ` [PATCH 70/73] pata_hpt3x2n: convert pr_XXX() calls Hannes Reinecke
2021-12-09 1:13 ` Damien Le Moal
2021-12-08 16:32 ` [PATCH 71/73] pata_hpt3x2n: convert pr_err() calls Hannes Reinecke
2021-12-09 1:14 ` Damien Le Moal
2021-12-09 8:09 ` Sergey Shtylyov
2021-12-08 16:32 ` [PATCH 72/73] pata_hpt366: convert pr_warn() calls Hannes Reinecke
2021-12-09 1:14 ` Damien Le Moal
2021-12-08 16:32 ` [PATCH 73/73] libata-scsi: rework ata_dump_status to avoid using pr_cont() Hannes Reinecke
2021-12-09 1:17 ` [PATCH 00/73] libata: rework logging, take II Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211208163255.114660-31-hare@suse.de \
--to=hare@suse.de \
--cc=damien.lemoal@wdc.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.