From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Rob Herring <robh@kernel.org>
Cc: Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tony Lindgren <tony@atomide.com>,
Roger Quadros <rogerq@kernel.org>,
devicetree@vger.kernel.org,
Thierry Reding <thierry.reding@gmail.com>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: mtd: ti,gpmc-nand: Add missing 'rb-gpios'
Date: Thu, 9 Dec 2021 10:42:24 +0100 [thread overview]
Message-ID: <20211209104224.41d42cca@xps13> (raw)
In-Reply-To: <20211206174209.2297565-1-robh@kernel.org>
Hi Rob,
robh@kernel.org wrote on Mon, 6 Dec 2021 11:42:09 -0600:
> With 'unevaluatedProperties' support implemented, the TI GPMC example
> has a warning:
>
> Documentation/devicetree/bindings/memory-controllers/ti,gpmc.example.dt.yaml: nand@0,0: Unevaluated properties are not allowed ('rb-gpios' was unexpected)
>
> Add the missing definition for 'rb-gpios'.
rb-gpios is already defined in nand-controller.yaml. I seems like the
real problem is that this file does not refer to it. Can you update the
fix?
While at it you might also want to drop the rb-gpios property from
ingenic,nand.yaml, which also defines it a second time.
> Cc: Miquel Raynal <miquel.raynal@bootlin.com>
> Cc: Richard Weinberger <richard@nod.at>
> Cc: Vignesh Raghavendra <vigneshr@ti.com>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Roger Quadros <rogerq@kernel.org>
> Cc: linux-mtd@lists.infradead.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
> index beb26b9bcfb2..1c280f52baa0 100644
> --- a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
> +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
> @@ -53,6 +53,11 @@ properties:
> enum: [8, 16]
> default: 8
>
> + rb-gpios:
> + description:
> + GPIO connection to R/B signal from NAND chip
> + maxItems: 1
> +
> patternProperties:
> "@[0-9a-f]+$":
> $ref: "/schemas/mtd/partitions/partition.yaml"
Thanks,
Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Rob Herring <robh@kernel.org>
Cc: Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tony Lindgren <tony@atomide.com>,
Roger Quadros <rogerq@kernel.org>,
devicetree@vger.kernel.org,
Thierry Reding <thierry.reding@gmail.com>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: mtd: ti,gpmc-nand: Add missing 'rb-gpios'
Date: Thu, 9 Dec 2021 10:42:24 +0100 [thread overview]
Message-ID: <20211209104224.41d42cca@xps13> (raw)
In-Reply-To: <20211206174209.2297565-1-robh@kernel.org>
Hi Rob,
robh@kernel.org wrote on Mon, 6 Dec 2021 11:42:09 -0600:
> With 'unevaluatedProperties' support implemented, the TI GPMC example
> has a warning:
>
> Documentation/devicetree/bindings/memory-controllers/ti,gpmc.example.dt.yaml: nand@0,0: Unevaluated properties are not allowed ('rb-gpios' was unexpected)
>
> Add the missing definition for 'rb-gpios'.
rb-gpios is already defined in nand-controller.yaml. I seems like the
real problem is that this file does not refer to it. Can you update the
fix?
While at it you might also want to drop the rb-gpios property from
ingenic,nand.yaml, which also defines it a second time.
> Cc: Miquel Raynal <miquel.raynal@bootlin.com>
> Cc: Richard Weinberger <richard@nod.at>
> Cc: Vignesh Raghavendra <vigneshr@ti.com>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Roger Quadros <rogerq@kernel.org>
> Cc: linux-mtd@lists.infradead.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
> index beb26b9bcfb2..1c280f52baa0 100644
> --- a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
> +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
> @@ -53,6 +53,11 @@ properties:
> enum: [8, 16]
> default: 8
>
> + rb-gpios:
> + description:
> + GPIO connection to R/B signal from NAND chip
> + maxItems: 1
> +
> patternProperties:
> "@[0-9a-f]+$":
> $ref: "/schemas/mtd/partitions/partition.yaml"
Thanks,
Miquèl
next prev parent reply other threads:[~2021-12-09 9:43 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-06 17:42 [PATCH] dt-bindings: mtd: ti,gpmc-nand: Add missing 'rb-gpios' Rob Herring
2021-12-06 17:42 ` Rob Herring
2021-12-07 8:36 ` Thierry Reding
2021-12-07 8:36 ` Thierry Reding
2021-12-07 12:47 ` Roger Quadros
2021-12-07 12:47 ` Roger Quadros
2021-12-09 9:42 ` Miquel Raynal [this message]
2021-12-09 9:42 ` Miquel Raynal
2021-12-09 10:08 ` Roger Quadros
2021-12-09 10:08 ` Roger Quadros
2021-12-09 10:40 ` Miquel Raynal
2021-12-09 10:40 ` Miquel Raynal
2021-12-09 12:11 ` Roger Quadros
2021-12-09 12:11 ` Roger Quadros
2021-12-09 12:37 ` Miquel Raynal
2021-12-09 12:37 ` Miquel Raynal
2021-12-09 16:50 ` Miquel Raynal
2021-12-09 16:50 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211209104224.41d42cca@xps13 \
--to=miquel.raynal@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
--cc=robh@kernel.org \
--cc=rogerq@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=tony@atomide.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.