All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Yann E. MORIN" <yann.morin.1998@free.fr>
To: Peter Korsgaard <peter@korsgaard.com>
Cc: buildroot@buildroot.org
Subject: Re: [Buildroot] [PATCH] configs/roseapplypi_defconfig: bump kernel to 5.15.10
Date: Sat, 18 Dec 2021 22:13:49 +0100	[thread overview]
Message-ID: <20211218211349.GN2603@scaer> (raw)
In-Reply-To: <20211218163742.13297-1-peter@korsgaard.com>

Peter, All,

On 2021-12-18 17:37 +0100, Peter Korsgaard spake thusly:
> The kernel now has support for dma, ethernet, i2c, mmc, pinctrl, regulator,
> so enable drivers for those, change to a ext4 rootfs and enable DHCP on
> eth0.
> 
> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Applied to master, thanks.

Will we at some point be able to drop our custom kernel config file, and
use an upstream defconfig instead?

Regards,
Yann E. MORIN.

> ---
>  board/roseapplepi/genimage.cfg |  6 ++++++
>  board/roseapplepi/linux.config | 25 +++++++++++++++++++++++++
>  board/roseapplepi/uEnv.txt     |  2 +-
>  configs/roseapplepi_defconfig  |  7 ++++---
>  4 files changed, 36 insertions(+), 4 deletions(-)
> 
> diff --git a/board/roseapplepi/genimage.cfg b/board/roseapplepi/genimage.cfg
> index f1bceb0ede..4c5a8de902 100644
> --- a/board/roseapplepi/genimage.cfg
> +++ b/board/roseapplepi/genimage.cfg
> @@ -36,4 +36,10 @@ image sdcard.img {
>  		bootable = "true"
>  		image = "boot.vfat"
>  	}
> +
> +	partition rootfs {
> +		partition-type = 0x83
> +		image = "rootfs.ext4"
> +		size = 512M
> +	}
>  }
> diff --git a/board/roseapplepi/linux.config b/board/roseapplepi/linux.config
> index aea48b7730..89e7c8917f 100644
> --- a/board/roseapplepi/linux.config
> +++ b/board/roseapplepi/linux.config
> @@ -26,19 +26,44 @@ CONFIG_INET=y
>  # CONFIG_IPV6 is not set
>  # CONFIG_WIRELESS is not set
>  # CONFIG_ETHTOOL_NETLINK is not set
> +CONFIG_NETDEVICES=y
> +CONFIG_OWL_EMAC=y
> +CONFIG_REALTEK_PHY=y
> +CONFIG_INPUT_EVDEV=y
> +CONFIG_INPUT_MISC=y
> +CONFIG_INPUT_ATC260X_ONKEY=y
>  # CONFIG_VT is not set
>  CONFIG_SERIAL_OWL=y
>  # CONFIG_HW_RANDOM is not set
> +CONFIG_I2C=y
> +CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_OWL=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_OWL=y
> +CONFIG_PINCTRL_S500=y
> +CONFIG_POWER_RESET=y
> +CONFIG_POWER_RESET_ATC260X=y
> +CONFIG_MFD_ATC260X_I2C=y
> +CONFIG_REGULATOR=y
> +CONFIG_REGULATOR_FIXED_VOLTAGE=y
> +CONFIG_REGULATOR_ATC260X=y
>  # CONFIG_HID is not set
>  # CONFIG_USB_SUPPORT is not set
> +CONFIG_MMC=y
> +CONFIG_MMC_OWL=y
> +CONFIG_DMADEVICES=y
> +CONFIG_OWL_DMA=y
>  # CONFIG_VIRTIO_MENU is not set
>  # CONFIG_VHOST_MENU is not set
>  # CONFIG_IOMMU_SUPPORT is not set
>  CONFIG_EXT4_FS=y
> +CONFIG_VFAT_FS=y
>  CONFIG_TMPFS=y
>  CONFIG_TMPFS_POSIX_ACL=y
>  # CONFIG_MISC_FILESYSTEMS is not set
>  # CONFIG_NETWORK_FILESYSTEMS is not set
> +CONFIG_NLS_CODEPAGE_437=y
> +CONFIG_NLS_ISO8859_1=y
>  # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
>  # CONFIG_CRYPTO_HW is not set
>  # CONFIG_FTRACE is not set
> diff --git a/board/roseapplepi/uEnv.txt b/board/roseapplepi/uEnv.txt
> index 2b9de727b4..339eb8aa0a 100644
> --- a/board/roseapplepi/uEnv.txt
> +++ b/board/roseapplepi/uEnv.txt
> @@ -1,3 +1,3 @@
>  # no ramdisk
>  ramdisk_addr_r=-
> -bootargs=console=ttyOWL2,115200
> +bootargs=console=ttyOWL2,115200 root=/dev/mmcblk0p2 rootwait clk_ignore_unused
> diff --git a/configs/roseapplepi_defconfig b/configs/roseapplepi_defconfig
> index 2af94d010b..f4efacf80d 100644
> --- a/configs/roseapplepi_defconfig
> +++ b/configs/roseapplepi_defconfig
> @@ -3,15 +3,16 @@ BR2_cortex_a9=y
>  BR2_ARM_ENABLE_NEON=y
>  BR2_ARM_ENABLE_VFP=y
>  BR2_GLOBAL_PATCH_DIR="board/roseapplepi/patches"
> -# Linux headers same as kernel, a 5.10 series
> -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
> +# Linux headers same as kernel, a 5.15 series
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
> +BR2_SYSTEM_DHCP="eth0"
>  BR2_ROOTFS_POST_BUILD_SCRIPT="board/roseapplepi/post-build.sh"
>  BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
>  BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/roseapplepi/genimage.cfg"
>  
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.1"
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.10"
>  BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
>  BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/roseapplepi/linux.config"
>  BR2_LINUX_KERNEL_UIMAGE=y
> -- 
> 2.20.1
> 
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

  reply	other threads:[~2021-12-18 21:14 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-18 16:37 [Buildroot] [PATCH] configs/roseapplypi_defconfig: bump kernel to 5.15.10 Peter Korsgaard
2021-12-18 21:13 ` Yann E. MORIN [this message]
2021-12-18 22:44   ` Peter Korsgaard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211218211349.GN2603@scaer \
    --to=yann.morin.1998@free.fr \
    --cc=buildroot@buildroot.org \
    --cc=peter@korsgaard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.