* [Buildroot] [PATCH] configs/roseapplypi_defconfig: bump kernel to 5.15.10
@ 2021-12-18 16:37 Peter Korsgaard
2021-12-18 21:13 ` Yann E. MORIN
0 siblings, 1 reply; 3+ messages in thread
From: Peter Korsgaard @ 2021-12-18 16:37 UTC (permalink / raw)
To: buildroot
The kernel now has support for dma, ethernet, i2c, mmc, pinctrl, regulator,
so enable drivers for those, change to a ext4 rootfs and enable DHCP on
eth0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
---
board/roseapplepi/genimage.cfg | 6 ++++++
board/roseapplepi/linux.config | 25 +++++++++++++++++++++++++
board/roseapplepi/uEnv.txt | 2 +-
configs/roseapplepi_defconfig | 7 ++++---
4 files changed, 36 insertions(+), 4 deletions(-)
diff --git a/board/roseapplepi/genimage.cfg b/board/roseapplepi/genimage.cfg
index f1bceb0ede..4c5a8de902 100644
--- a/board/roseapplepi/genimage.cfg
+++ b/board/roseapplepi/genimage.cfg
@@ -36,4 +36,10 @@ image sdcard.img {
bootable = "true"
image = "boot.vfat"
}
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ size = 512M
+ }
}
diff --git a/board/roseapplepi/linux.config b/board/roseapplepi/linux.config
index aea48b7730..89e7c8917f 100644
--- a/board/roseapplepi/linux.config
+++ b/board/roseapplepi/linux.config
@@ -26,19 +26,44 @@ CONFIG_INET=y
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
# CONFIG_ETHTOOL_NETLINK is not set
+CONFIG_NETDEVICES=y
+CONFIG_OWL_EMAC=y
+CONFIG_REALTEK_PHY=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_ATC260X_ONKEY=y
# CONFIG_VT is not set
CONFIG_SERIAL_OWL=y
# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OWL=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_OWL=y
+CONFIG_PINCTRL_S500=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_ATC260X=y
+CONFIG_MFD_ATC260X_I2C=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ATC260X=y
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_OWL=y
+CONFIG_DMADEVICES=y
+CONFIG_OWL_DMA=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VHOST_MENU is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT4_FS=y
+CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_FTRACE is not set
diff --git a/board/roseapplepi/uEnv.txt b/board/roseapplepi/uEnv.txt
index 2b9de727b4..339eb8aa0a 100644
--- a/board/roseapplepi/uEnv.txt
+++ b/board/roseapplepi/uEnv.txt
@@ -1,3 +1,3 @@
# no ramdisk
ramdisk_addr_r=-
-bootargs=console=ttyOWL2,115200
+bootargs=console=ttyOWL2,115200 root=/dev/mmcblk0p2 rootwait clk_ignore_unused
diff --git a/configs/roseapplepi_defconfig b/configs/roseapplepi_defconfig
index 2af94d010b..f4efacf80d 100644
--- a/configs/roseapplepi_defconfig
+++ b/configs/roseapplepi_defconfig
@@ -3,15 +3,16 @@ BR2_cortex_a9=y
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_GLOBAL_PATCH_DIR="board/roseapplepi/patches"
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 5.15 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
+BR2_SYSTEM_DHCP="eth0"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/roseapplepi/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/roseapplepi/genimage.cfg"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.10"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/roseapplepi/linux.config"
BR2_LINUX_KERNEL_UIMAGE=y
--
2.20.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [Buildroot] [PATCH] configs/roseapplypi_defconfig: bump kernel to 5.15.10
2021-12-18 16:37 [Buildroot] [PATCH] configs/roseapplypi_defconfig: bump kernel to 5.15.10 Peter Korsgaard
@ 2021-12-18 21:13 ` Yann E. MORIN
2021-12-18 22:44 ` Peter Korsgaard
0 siblings, 1 reply; 3+ messages in thread
From: Yann E. MORIN @ 2021-12-18 21:13 UTC (permalink / raw)
To: Peter Korsgaard; +Cc: buildroot
Peter, All,
On 2021-12-18 17:37 +0100, Peter Korsgaard spake thusly:
> The kernel now has support for dma, ethernet, i2c, mmc, pinctrl, regulator,
> so enable drivers for those, change to a ext4 rootfs and enable DHCP on
> eth0.
>
> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Applied to master, thanks.
Will we at some point be able to drop our custom kernel config file, and
use an upstream defconfig instead?
Regards,
Yann E. MORIN.
> ---
> board/roseapplepi/genimage.cfg | 6 ++++++
> board/roseapplepi/linux.config | 25 +++++++++++++++++++++++++
> board/roseapplepi/uEnv.txt | 2 +-
> configs/roseapplepi_defconfig | 7 ++++---
> 4 files changed, 36 insertions(+), 4 deletions(-)
>
> diff --git a/board/roseapplepi/genimage.cfg b/board/roseapplepi/genimage.cfg
> index f1bceb0ede..4c5a8de902 100644
> --- a/board/roseapplepi/genimage.cfg
> +++ b/board/roseapplepi/genimage.cfg
> @@ -36,4 +36,10 @@ image sdcard.img {
> bootable = "true"
> image = "boot.vfat"
> }
> +
> + partition rootfs {
> + partition-type = 0x83
> + image = "rootfs.ext4"
> + size = 512M
> + }
> }
> diff --git a/board/roseapplepi/linux.config b/board/roseapplepi/linux.config
> index aea48b7730..89e7c8917f 100644
> --- a/board/roseapplepi/linux.config
> +++ b/board/roseapplepi/linux.config
> @@ -26,19 +26,44 @@ CONFIG_INET=y
> # CONFIG_IPV6 is not set
> # CONFIG_WIRELESS is not set
> # CONFIG_ETHTOOL_NETLINK is not set
> +CONFIG_NETDEVICES=y
> +CONFIG_OWL_EMAC=y
> +CONFIG_REALTEK_PHY=y
> +CONFIG_INPUT_EVDEV=y
> +CONFIG_INPUT_MISC=y
> +CONFIG_INPUT_ATC260X_ONKEY=y
> # CONFIG_VT is not set
> CONFIG_SERIAL_OWL=y
> # CONFIG_HW_RANDOM is not set
> +CONFIG_I2C=y
> +CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_OWL=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_OWL=y
> +CONFIG_PINCTRL_S500=y
> +CONFIG_POWER_RESET=y
> +CONFIG_POWER_RESET_ATC260X=y
> +CONFIG_MFD_ATC260X_I2C=y
> +CONFIG_REGULATOR=y
> +CONFIG_REGULATOR_FIXED_VOLTAGE=y
> +CONFIG_REGULATOR_ATC260X=y
> # CONFIG_HID is not set
> # CONFIG_USB_SUPPORT is not set
> +CONFIG_MMC=y
> +CONFIG_MMC_OWL=y
> +CONFIG_DMADEVICES=y
> +CONFIG_OWL_DMA=y
> # CONFIG_VIRTIO_MENU is not set
> # CONFIG_VHOST_MENU is not set
> # CONFIG_IOMMU_SUPPORT is not set
> CONFIG_EXT4_FS=y
> +CONFIG_VFAT_FS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> # CONFIG_MISC_FILESYSTEMS is not set
> # CONFIG_NETWORK_FILESYSTEMS is not set
> +CONFIG_NLS_CODEPAGE_437=y
> +CONFIG_NLS_ISO8859_1=y
> # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
> # CONFIG_CRYPTO_HW is not set
> # CONFIG_FTRACE is not set
> diff --git a/board/roseapplepi/uEnv.txt b/board/roseapplepi/uEnv.txt
> index 2b9de727b4..339eb8aa0a 100644
> --- a/board/roseapplepi/uEnv.txt
> +++ b/board/roseapplepi/uEnv.txt
> @@ -1,3 +1,3 @@
> # no ramdisk
> ramdisk_addr_r=-
> -bootargs=console=ttyOWL2,115200
> +bootargs=console=ttyOWL2,115200 root=/dev/mmcblk0p2 rootwait clk_ignore_unused
> diff --git a/configs/roseapplepi_defconfig b/configs/roseapplepi_defconfig
> index 2af94d010b..f4efacf80d 100644
> --- a/configs/roseapplepi_defconfig
> +++ b/configs/roseapplepi_defconfig
> @@ -3,15 +3,16 @@ BR2_cortex_a9=y
> BR2_ARM_ENABLE_NEON=y
> BR2_ARM_ENABLE_VFP=y
> BR2_GLOBAL_PATCH_DIR="board/roseapplepi/patches"
> -# Linux headers same as kernel, a 5.10 series
> -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
> +# Linux headers same as kernel, a 5.15 series
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
> +BR2_SYSTEM_DHCP="eth0"
> BR2_ROOTFS_POST_BUILD_SCRIPT="board/roseapplepi/post-build.sh"
> BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/roseapplepi/genimage.cfg"
>
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.1"
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.10"
> BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/roseapplepi/linux.config"
> BR2_LINUX_KERNEL_UIMAGE=y
> --
> 2.20.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Buildroot] [PATCH] configs/roseapplypi_defconfig: bump kernel to 5.15.10
2021-12-18 21:13 ` Yann E. MORIN
@ 2021-12-18 22:44 ` Peter Korsgaard
0 siblings, 0 replies; 3+ messages in thread
From: Peter Korsgaard @ 2021-12-18 22:44 UTC (permalink / raw)
To: Yann E. MORIN; +Cc: buildroot
>>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:
> Peter, All,
> On 2021-12-18 17:37 +0100, Peter Korsgaard spake thusly:
>> The kernel now has support for dma, ethernet, i2c, mmc, pinctrl, regulator,
>> so enable drivers for those, change to a ext4 rootfs and enable DHCP on
>> eth0.
>>
>> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
> Applied to master, thanks.
> Will we at some point be able to drop our custom kernel config file, and
> use an upstream defconfig instead?
Possibly yes. Basic owl support was added to multi_v7_defconfig with:
commit 26ba4a474aec5998e52826319c4d7a1c98e8fab5
Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Thu Jan 21 11:44:47 2021 +0530
ARM: multi_v7_defconfig: Enable Actions Semi platform and drivers
The support for Actions Semi ARM32 platform has matured enough in the
mainline. So let's enable it in multi_v7_defconfig along with the
relevant drivers. The platform can now boot a distro from eMMC or uSD
without any out of tree patch.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=26ba4a474aec5998e52826319c4d7a1c98e8fab5
I haven't given it a try yet though. I'll try to find some time to do
it.
--
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-12-18 22:44 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-12-18 16:37 [Buildroot] [PATCH] configs/roseapplypi_defconfig: bump kernel to 5.15.10 Peter Korsgaard
2021-12-18 21:13 ` Yann E. MORIN
2021-12-18 22:44 ` Peter Korsgaard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.