From: Nathan Chancellor <nathan@kernel.org>
To: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Nathan Chancellor <nathan@kernel.org>,
stable@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH] ARM: davinci: da850-evm: Avoid NULL pointer dereference
Date: Thu, 23 Dec 2021 15:21:41 -0700 [thread overview]
Message-ID: <20211223222141.1253092-1-nathan@kernel.org> (raw)
With newer versions of GCC, there is a panic in da850_evm_config_emac()
when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine:
Unable to handle kernel NULL pointer dereference at virtual address 00000020
pgd = (ptrval)
[00000020] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1
Hardware name: Generic DT based system
PC is at da850_evm_config_emac+0x1c/0x120
LR is at do_one_initcall+0x50/0x1e0
The emac_pdata pointer in soc_info is NULL because davinci_soc_info only
gets populated on davinci machines but da850_evm_config_emac() is called
on all machines via device_initcall().
Move the rmii_en assignment below the machine check so that it is only
dereferenced when running on a supported SoC.
Cc: stable@vger.kernel.org
Fixes: bae105879f2f ("davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY")
Link: https://lore.kernel.org/r/YcS4xVWs6bQlQSPC@archlinux-ax161/
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
---
arch/arm/mach-davinci/board-da850-evm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 428012687a80..7f7f6bae21c2 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1101,11 +1101,13 @@ static int __init da850_evm_config_emac(void)
int ret;
u32 val;
struct davinci_soc_info *soc_info = &davinci_soc_info;
- u8 rmii_en = soc_info->emac_pdata->rmii_en;
+ u8 rmii_en;
if (!machine_is_davinci_da850_evm())
return 0;
+ rmii_en = soc_info->emac_pdata->rmii_en;
+
cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
val = __raw_readl(cfg_chip3_base);
base-commit: a7904a538933c525096ca2ccde1e60d0ee62c08e
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Nathan Chancellor <nathan@kernel.org>
To: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Nathan Chancellor <nathan@kernel.org>,
stable@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH] ARM: davinci: da850-evm: Avoid NULL pointer dereference
Date: Thu, 23 Dec 2021 15:21:41 -0700 [thread overview]
Message-ID: <20211223222141.1253092-1-nathan@kernel.org> (raw)
With newer versions of GCC, there is a panic in da850_evm_config_emac()
when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine:
Unable to handle kernel NULL pointer dereference at virtual address 00000020
pgd = (ptrval)
[00000020] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1
Hardware name: Generic DT based system
PC is at da850_evm_config_emac+0x1c/0x120
LR is at do_one_initcall+0x50/0x1e0
The emac_pdata pointer in soc_info is NULL because davinci_soc_info only
gets populated on davinci machines but da850_evm_config_emac() is called
on all machines via device_initcall().
Move the rmii_en assignment below the machine check so that it is only
dereferenced when running on a supported SoC.
Cc: stable@vger.kernel.org
Fixes: bae105879f2f ("davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY")
Link: https://lore.kernel.org/r/YcS4xVWs6bQlQSPC@archlinux-ax161/
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
---
arch/arm/mach-davinci/board-da850-evm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 428012687a80..7f7f6bae21c2 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1101,11 +1101,13 @@ static int __init da850_evm_config_emac(void)
int ret;
u32 val;
struct davinci_soc_info *soc_info = &davinci_soc_info;
- u8 rmii_en = soc_info->emac_pdata->rmii_en;
+ u8 rmii_en;
if (!machine_is_davinci_da850_evm())
return 0;
+ rmii_en = soc_info->emac_pdata->rmii_en;
+
cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
val = __raw_readl(cfg_chip3_base);
base-commit: a7904a538933c525096ca2ccde1e60d0ee62c08e
--
2.34.1
next reply other threads:[~2021-12-23 22:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-23 22:21 Nathan Chancellor [this message]
2021-12-23 22:21 ` [PATCH] ARM: davinci: da850-evm: Avoid NULL pointer dereference Nathan Chancellor
2021-12-25 14:23 ` Bartosz Golaszewski
2021-12-25 14:23 ` Bartosz Golaszewski
2022-02-03 17:09 ` Nathan Chancellor
2022-02-03 17:09 ` Nathan Chancellor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211223222141.1253092-1-nathan@kernel.org \
--to=nathan@kernel.org \
--cc=arnd@arndb.de \
--cc=brgl@bgdev.pl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.